I hope the mac folks can lend a guy a hand. I have the latest AE and it runs great with a shared HD between Vista PC and my Macs. My ISP is dynamic so I'm using dyndns.org. Since I don't really want to leave a computer on 24-7 (for the dyndns updates) I have a linksys router take the feed from the cable modem. AE is in bridged mode. All disks and wireless is flawless. I can access my webcams via the static ip from dyndns, route it to linksys then to camera. But I can't figure out how or what to do to get access to my shared drivers over the net. I researched for a couple hours today and came up with a few people who did it (maybe they didn't have a leading router like me) but they didn't leave enough clues, details or links to research it some more. Apple online support is slim and I'm clueless on Bonjour configs.
I have an older cable modem running Comcast's service connected to the newest AirPort Extreme in my current setup. My computer is a 13.3" MacBook Pro with all of the latest software updates. With all of that said, I'm having problems with having webpages hang, dropped audio on streams and constant re-buffering of video. Strangely enough, my signal is always at full strength no matter how far away I am from the AirPort. Until a few days ago I was using a Linksys WRT54GL with DD-WRT firmware with absolutely no troubles at all, but things have gone to hell with this new router. I've rebooted my modem and AirPort and I've browsed through the settings without finding any solutions yet. I've tried 5Ghz mode, I've tried being inches away from the AirPort and I've tried going to 802.11g with no improvements. Does anyone have an idea about what is going on?
I have read the threads about my accessing the USB drive on my Airport Extreme via an AFP connection...and it works. Without a hitch. BUT I would like to allow others (who are not on my home network) to access this same drive (with some level of security). Is THAT possible and if so, how? I have 2 partitions on this HD, one is a mac-formatted partition and the other is a FAT32 for PC user access. Or course, each partition has a unique name so, depending on the user, they would access either the Mac or PC formatted partition. BTW, I did some thread-checking but all seem to find are one's that show how to I can make a connection to my own drives away from the home, NOT someone who is not associated with my home network to make the same connection to the USB drive on my APE.
I've owned a Netgear and a D-Link route before and with those, you could access all your router settings and statuses over the internet. The Login would usuallly be the ip address and the password would be one of your choice. I can't seem to find any settings to enable this on my Airport Extreme.
i have an airport extreme and an HDD attached to it, Every one sees it and its a great day.then i was told i could access my HDD using icloud cause back to my mac is closing so i said sure, BUT i cant
I'm a PC user and have one laptop right now but am expecting to get more. I've just bought an airport extreme so that I can have a networked printer and a shared hard drive. The printer is working fine, and my HDD (Seagate FreeAgent) is showing up in Airport Utility/Disks but I can't see it anywhere in Windows Explorer, or in Airport Base Station Agent. I'm not sure what to enter the Workgroup and WINS Server fields on Airport Utility so perhaps this is part of the problem? I've never set up a workgroup because i've only got the one PC here so far. Otherwise i'm at a loss as to what to do. If I can't use the external HDD then the airport extreme is useless to me. I'm running XP on an HP laptop
My condo association provides wireless internet. There are a few rooms that get weak signal. Is there a way I can setup an airport extreme to act as an access point and amplify the signal.
I am a new Mac user this year ( I bought a 27" C2D iMac) and finally converted from a Linksys wireless G router to an Airport Extreme. Everything was simple to set up on the Airport. One question I have is how to remote administer the Extreme. On the Linksys I would enable remote administration by opening port 8080. Then from an off site location, I would type my IP Address ( I have a static IP) as follows - IP_Address:8080 in a web browser like Firefox. This would bring up a login screen for me to log into my router. The reason I would like to remote administer my router is that I have several Linux servers on my network that I use VNC to administer. I do not like logging into one server and then from that server logging into another server on the network. Rather I would just change the VNC port forwarding to the IP address of the server I wanted to reach via the Linksys admin. Is there a way to get to my Airport Extreme without going through my iMac?
I'm not very well versed in networking or IP stuff, but maybe someone can help me. I have an airport extreme running the wireless network in my house. I know my IP number (it changes, but I'm switching to a static #). Is there a way I can access my network over the internet through the airport extreme? I have a mini-server device running on my network that utilizes port 80 and I'm sure there's some way to read that over the internet. (if I'm using the wireless network, I use address http://10.0.1.3/webpage.html to view) Is there a way to view that address from the internet? And lastly, if am I opening up a can of security worms if I try this?
My tenant uses my wireless network and lately has been sucking up so much bandwidth that I can't even hold a connection on XBox Live for more than 10 minutes. She is on the guest network so is there any way to prioritize bandwidth on my Airport so that it knows to give the main network priority over the guest network and so if I'm on XBox Live or downloading a movie and she's downloading something of her own it'll give me at least 75% of the bandwidth and her only 25%?
Just bought an airport express to replace my old 802g router. So far I love it. Hooked up a usb hub and now am sharing an external hard drive and 2 printers throughout my house (1 mac, 2 pc) Here is my question, when I am away from home, lets say at work or in a hotel, etc How can I access my external hard drive that is on my airport extreme? Most likely I will want to be accessing it from a PC. Thanks, and I did search but didnt find an answer
I have been trying for about an hour and it keeps saying there was an error and the scanner cannot be found. can you access the scanner from your mac or not? i keep having to plug the usb into the computer to recognize the scanner.
I picked up my first Mac about a 2 weeks ago and over this past weekend I picked up a new Time Capsule. Originally I bought the Time Capsule to wirelessly bridge to my Linksys router running DD-WRT (mega) but apparently the ethernet ports won't work on the Time Capsule or the Airport Extreme when connecting them to another party wireless router. So i have taken out my Linksys and am now only using the Time Capsule. The reason for the Time Capsule is to have backups on it and that for some reason I do have wireless issues with my Linksys that I am not having with the Time Capsule. Such as when I had a iPhone I would lose my wireless signle a lot and have to reboot, same with my iPad and sometimes with my Nexus One. So far none of those issues with the Time Capsule. I'm not missing much from my Linksys but one of the things I miss is being able to open up a browser from any network connection and being able to connect into my router. Is there a way with the Time Capsule / Airport Extreme to be able to access the configuration settings when not on the local network? Such a when I am at work I want to be able to access the configurations page.
Is it possible to access my airport extreme base station at home from somewhere else? I have an external hard drive connected to it and would like to be able to access from work or on the go. If I can do this will it be secure and safe from other users accessing it? I've googled info on this and have come up pretty empty. I'm running a MBP 2.4 with OSX 10.6.4.
Today I configured "Back to my Mac" and I'm having a little issue with the external HDD that is connected to the Airport.
Let me explain the configuration: Airport Extreme (latest version) configured with Back to My Mac option, with an external HDD connected using USB port (The HDD is externanly powered). iMac computer with OSX Mavericks wireless connected, configured with iCloud Account and Back to My Mac with screen sharing).
I can access the shared screen and control the iMac from my Macbook Air outside my home network.
The issue is when I try to access the "network HDD" because I can connect using the right user but Finder windows never shows the HDD content. I have to disconect and reconnect to the external HDD to be able to see the files (If I have 3 windows and want to access the HDD on each of the 3 windows, I have to disconnect and reconnect 3 times).
Question: There is any way to access the external HDD and be able to see its content using the configuration mentioned? The disconnect and reconnect procedure for each window is normal? There is a better configuration I can apply?. Just as information, from my MacBook Im able to see perfect the HDD content from outside my home network.
Info: Airport Express, OS X Mavericks (10.9.4), New Airport Express
I have an airport extreme that was passed down to me when my aunt bought a time capsule. It has worked perfectly for nearly a year. I was out of town for a few weeks and came back to the amber blinking light. I use a cable modem to connect to the internet and a direct connection to my macbook pro works fine. I figured out how to use airport utility and i thought the errors were fixed, as the light is green now....but my laptop (or ipod touch) will not connect to the internet wirelessly.
I recently purchased an older model Airport Extreme on Ebay. Came in the original box and looks as though it was never used. I installed it on my G5 single processor which is equipped with an Airport Extreme card. I get my internet from Cox Communications in Tucson via a Scientific Atlanta modem. When I do a diagnostic, it shows everything related to the Airport is green. But, it doesn't work and I have no connection to the internet. What am I doing wrong?
I'm thinking about purchasing an airport extreme and replacing my current wireless router. So I'm wondering, would my internet be any faster? Right now I am on a belkin wireless router thats about 4 - 5 years old. So if you were in my position would you purchase the airport extreme?
Is it possible to use Airport Extreme without a modem or internet connection? I used to have internet in my house but no longer need it. I would still like to be able to wirelessly access my printer and external hard drive. Any ideas?
ately i had an issue which i cannot resolve here. My APE seems to be the main cause to slow my internet in loading pages up. My speed with the check from ISP, it is great. However, I realize that my ping time is kinda high? What should I do to bring my internet back to smooth loading up?
I've had this simultaneous dual band APX for a while now and have just been overlooking this problem, but now I really just want to resolve it. Basically it will not connect to the internet when plugged directly into our cable modem. In order for it to work, I have to leave our old Belkin wireless router plugged in between the APX and cable modem.
I cannot connect to Internet via my MBP (late 2013) through my Airport Extreme. It will connect to the AE fine, but the Airport Utility will show that the AE is not connected to the internet. Which is a lie, because other devices (iOS, Windows) will connect to internet through the same AE. working on the MBP under Bootcamp. So we can also rule out hardware issues with the WiFi chipset. This must be a MacOS (Mavericks) related issue.
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I am having great difficulty accessing my work VPN via my Airport Extreme Base Station (N model, 2007), and I wonder whether anybody can help? I was getting no joy accessing my work VPN (using my works laptop) via the AEBS (i have Virgin Cable Broadband). Citrix would not connect at all. Getting very frustrated and suspecting it was something to do with my ISP, I ended up buying a cheap second hand Belkin Wireless G cable router just to double check that it wasnt a problem with my hardware. To my utter shock, I managed to connect first time using the Belkin Wireless G router to the VPN. This obviously meant there must be an issue with the Airport Extreme Base station. The question is, what? I am utterly confused, and haven't a clue where to start in terms of adjusting the settings, and what settings I actually need to change to try and solve this. Has anybody any ideas where to start? Why can I connect via the Belkin Router (which cost me �9 on ebay) and the vastly more expensive Apple router?
I'm trying to set Airport Extreme as a wireless access point, but having some problems with it. My current setup is as follows: Time Capsule as the main router. Connected to my cable modem, and all computers connect wirelessly to Time Capsule. Two Airport Expresses connect wirelessly to Time Capsule. "Join a wireless network" and have selected "Allow Ethernet Clients" I want to have Airport Extreme do the same thing that Airport Expresses are doing, and have it connect wirelessly to Time Capsule. I have some ethernet required devices that need to be in another room. Can this be done? I set Airport Extreme exactly same as Airport Express, but do not see "Allow Ethernet Clients" checkbox.
I am new to this forum, but not new to the apple scene. I realise that you can remotely access the hard drive while connected to the WLAN. But, can you access the connected hard drive remotely over the internet using only the Airport Extreme Base Station?
It could be a firewall setting. It could be a software update. Whatever it is, I cannot connect to the internet using Extreme (it does connect to the internet using just plain old wifi). This is a sudden problem--it worked fine last week.
I currently use a Powerbook, and I access the internet though our AirPort Extreme router. Recently, for some reason, although I am on the right network, and signal strength is full - I am unable to connect to the internet! I've called my provider, and everything is fine on their end according to their systems. I've tried power cycling, and checking my settings, and everything SEEMS to be ok.
my airport extreme connection to internet keeps failing. It is occurring about every 3-4 days, where I get amber light. By unplugging it resets again. Is there something I can do, or do I need to by a new system. It is about 2 years old.
