My camera (Canon T5I DSLR) has audio hiss in it. I heard that this is the automatic gain control in my camera. However I can't disable it. It therefor leaves an annoying hiss in the audio. Is there a way that I could remove this in final cut pro x or garage band?
View 1 RepliesI have a problem digitising footage into final cut from my Sony HD 1080i/mini DV camera.
It used to work ok, albeit with some rendering issues.I had it set to the HD settings. Suddenly it stopped working I have tried adjusting the audio visual settings, using several different types. The only one i could get it to communicate on was DV50 pal 48Hz anamorphic.But it stops digitising after 3/4 sec and says there is a problem with my source tape.
I have tried to use the "camera archive functionality" for the first time and got a problem, I can't solve myself:
I plugged a SD-Card with content of my Panasonic SD 909 into my Mac and opened FCPX. Then I went to the "Import Media"-Window. The card is shown twice. I think, this is, because it contains different media. Some clips shot in Panasonics "iFrame"-Mode (which leads to h.264), some shots in the well-known AVCHD-mode. First is shown in the one camera-card, second in the other. Importing media from this card(s) into an FCPX event works without problems.
No I activated one of the two cards in the upper right panel and clicked on "create archive" (or similar, I use the german translation). A window pops up where I can choose the destination for the archive (I have chosen my desktop first). I did not activate the option "create favorite" for now and started processing.
It took a long while (about 18 GB of data), but then the archive was created and in the finder, I can see it on my desktop. Annotation: Selecting the first or second camera-card for archiving leads to the same result. In both cases a archive was generated which stores both contens (approved by examining the package size and content in the finder).
But now, the problem(s):When I go to the import window in FCPX again, the archive is not visible. It does not appear in the left panel of the import media-Window. Not as a camera, not as a device, not as an archive. Restarting FCPX and even my Mac does not solve this.I can navigate to the archive via choosing my harddisk/desktop in the left panel and can see it in the "choose media section" in the bottom of the window. It behaves like a folder there. When I open this folder, I only see the h.264-media, but no AVCHD-Clips. This happens, regardless which card I have choosen when generating the archive (tried it with both, and - as said - both ways result in the same archive).
What am I doing wrong? I know, in older versions of FCPX, archives had to be stored in a special folder inside the movie-folder of my user, but this has changed with 10.1.2 and the folder is not there any longer. Is there an other place for the archives? I thought, starting with 10.1.2 it's no matter, where to store them...
Or is this a bug in FCPX (10.1.3)?
If this is on interest, my OS is 10.9.4, the complete system nearly a "virgin" (fresh complete install).
Info:
iMac (27-inch, Late 2012), OS X Mavericks (10.9.4)
I have a Canon XL1s going into my MacBook Pro running Final Cut X via DV to FireWire 800 to thunderbolt. Since I am recording long meetings I skip recording to tape and record straight to the hard drive. I have done this in the past and it worked on older versions of the same hardware and software.
It will import only when the camera is also recording.Now When you import, you can see the feed and the computer says its importing, but after you stop importing the files are nowhere to be found. I even tried this on IMovie and used someone else's Mac with the same result.
Info:
Final Cut Pro X, OS X Yosemite (10.10.1)
I have some live footage of musical performance. I have footage from two cameras and the sound off the desk that I need to sync up. I had hoped I could sync the sound to both cameras, then put in which shots I chose at any given point, but I don't know if the system will do that.
View 1 Replies View RelatedIs it possible to import cinema dng raw files from a BMC Camera into FCP X?
I'm running Mac OS X 10.6.8 Snow Leopard and FCP X 10.0.9 ...
When I try to create a camera archive from the card a videographer gave me I see that the archive grows to the expected size but then I get a message saying "Unable to create camera archive". Here is what the card looks like with all its folders open:
Here is the Inspector from one of the files on the card:
Here is how Final Cut sees the card from the import window:
I also imported the files without making a camera archive. In that case Final Cut copied all of the files, not letting me choose the option to leave the files in place. I am able to use the files so copied, except the audio is missing in the final frame of each clip, an example of which you can see below. There is a video image in the final frame and it is different from the one before it and the one after it.
I've also tried to process the files with ClipWrap but ClipWrap does not allow me to drag anything from the card onto its clip window. Why does Final Cut fail to create an archive?
Is there any better way to import the files than the way that led to the missing frame of audio on the end of each clip?
Info:
iMac (27-inch Mid 2011), OS X Mavericks (10.9.1)
I was simply trying to combined footage for a 2 camera concert shoot and now the audio meters are peeking and beeping? What did I do?
View 1 Replies View RelatedTrying to upload video project on final cut pro x and won't because says no referencing media from camera even though it is uploaded.
View 1 Replies View RelatedI have: FCP X 10.1.3
Hi 8 tapes and camera
VHS and SVHS tapes and camera
JVC GY-DV5000U camera and mini DV tapes
Firewire cable
Apple Thunderbolt to FireWire Adapter
These tapes and cameras are unsupported in FCP X 10.1.3.
How can I capture (import) the video tape segments onto my Mac OS X version 10.9.4 so that I can edit the video in FCP? Are there special procedures or products that are needed?
Info:
iMac, OS X Mavericks (10.9.4)
FCPX (latest version) recognizes my external hard drive (my book 4TB) as a camera. Didn't dave this problem before, so when I'm importing to my project the the hard drive is listed as a camera and the program starts to scan through all files! this means that the ram memory is filled i no time! Is it something in my settings or is it the new version of fcpx that is playing tricks on me (not supported had drive?)
View 2 Replies View RelatedI import clips from a flash memory drive (the one attached to Sony NX5U camera). The drive is connected with USB cable. All clips imported are fine except one. The problematic one is in the AVCHD category in the browser and has a little camera icon on the bottom left of it's thumbnail. I cannot share the project containing that clip (there is a message that says:''this Item cannot be shared while it is still referencing media on the camera''). What does that icon mean and how do I import the clip properly ? I tried importing the clip again and it does the same thing...
Info:
Final Cut Pro X, Mac OS X (10.7.5)
I want to Karaoke 'Try' by Dolly Parton on Blue Smoke as there are no available karaokes of it commercially, so I want to remove the vocals on the song but keep the musical arrangement. Can Final Cut Pro X do that?
Info:
Final Cut Pro X, OS X Mavericks (10.9.3)
I've read in several posts in this website's forum that there's a CPU noise problem with the MBPs, i even got to this site: o-noise-update...The thing is, that my computer is experimenting completely different symptoms, and that's quite annoying. I feel I'm alone in this The thing started like this, I sent my 13" Mid 2009's 2GHZ MBP to AppleCare to be repaired after the audio jack stopped working, they told me the audio card was to be replaced, and they did fix that problem, little did I not notice in the Apple Store (due to the store's natural noisy environment) that after this repair they gave me the computer back with the infamous hissing sound.
View 4 Replies View RelatedIs anyone else having problems using their headphones with the Macbook Air? My Shure E500 headphones have a loud hiss and instead of playing music properly, the music is filled with odd bleeps and bloops. I have a similar problem with my Etymotic headhones. I *think* the standard iPod headphones worked fine, but I no longer have them on hand to test.
View 4 Replies View RelatedI purchased a MacBook 2010 from bestbuy almost two weeks ago, I have only really internet surfed and added some songs from my ipod using senuti. Yesterday I started noticing this little noise sort of a sounds like a bug like a scratchy hiss (or something spinning kind of like the noise my ipod classic makes every now n then) its very quick but it happens every few seconds. Now mind you it is very faint cant hear it if there's noise around me but if its silent I can hear it. I wanted to know am if its something I should be concerned with or was this small noise there from the beginning and i just started paying attention.
View 6 Replies View RelatedEarlier I noticed a faint noise coming from the top left of the iMac, a little 'hiss' like, but otherwise hard to describe. I presume it's the HD, but I'm not quite sure as diagrams show the HD being more-a-less in the middle. Perhaps the room has got quieter, but then again the concern is that the iMac has got louder.
View 4 Replies View RelatedRecorded audio with a good sony wireless mic in a room that didn't have much in it to absorb sound, the audio is great except that it sounds like it was recorded in a large hall or something. I'm editing with FCE 4.01 on a macbook with OS 10.7.5 and I'm not very familiar with audio filters, how to get rid of the echo?
Info:
MacBook, Mac OS X (10.6.8)
I have an external iSight Web camera and want to use it with an iMac with a built in iSight camera. Can I disable the built in iSight camera and instead use the external camera?
View 2 Replies View RelatedSurely this is a pretty standard feature in laptops now, particularly with Apple's obsession with iPhoto etcDoes it come as an option?How do you get your pics off your camera? You have to connect a usb cable from the laptop to the camera?
View 24 Replies View RelatedCould someone give me a direct comparison between resolution on iSight on my macBook and iPhone camera.
View 2 Replies View Relatedfind security Camera, Security Camera Systems & Wireless Security Camera.
View 2 Replies View RelatedI just removed over 1000 cookies. They were bogging the system down to the point of having some pages freeze. I then closed Safari. I launched Safari again a few minutes later and all the cookies were back, even though the only site I went to was the Apple open page.
View 5 Replies View RelatedI've just noticed that in my Finder window sidebar, under "Shared", I have a character called Thomson listed. I don't know any Thomson and I bought the machine, an MBA, brand new. However, I did have an engineer instal the machine in my apartment and can only assume he's the mysterious Thomson. Anyway, whoever he/she is, I don't want him/her on my machine as Shared & "connected as guest". The point is, I cannot find a way to delete Thomson!! Can anyone help? I've tried System Preferences>Security and Accounts and there's no trace of Thomson there. Right clicking on Thomson in the sidebar of Finder only gives me the option to Open and Get Info. Most annoying, this. There MUST be a way to delete a Sharing but totally unwanted guest....
View 13 Replies View RelatedWill LiveType work on Mavericks?
Will Final Cut Express work on Mavericks?
I am still trying to find the best easy video camera for my 12 year old grandaughter to use with a mac. she loves i photo and idvd and i movie and is pretty good with all. I just want to get a simple video camera for her to do her own little films.
View 4 Replies View RelatedI have some footage we took at school with HD camera and I can't play it on my mac. It's in .mov format but it shows me HDV 1080i50 i movie info. I have quicktime pro and perian but I can only hear sound. No picture.
View 3 Replies View Relatedi am new to the mac, im using macbook. I don't know how ro use isight camera. how to capture a picture or take a video using isight camera.
View 4 Replies View RelatedWhen I plug my camera in then turn it on iphoto pops up and I can do anything with the pictures but how do I see just the camera without iphoto, like enabling disk use.
View 5 Replies View RelatedI was wondering if it is possible for me to use my Olympus Stylus while it is hooked up to my computer. I don't have a memory card for the camera and wanted to do a time lapse from my window.
View 2 Replies View Related