I was wonder if Final cut pro x have the ability to show how much time is remaining in the rendering process...like premiere or final cut 7 use to, if I remember correctly...Same thing with Compressor 4.1.3
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
Ok when I render at all it never EVER works. It has worked a couple times but recently I do everything people suggest and it doesn't work. I've converted both into the same format so it'll work, I've restarted final cut pro, I've restarted the computer, I've repaired disk permissions, i've done render all. All worked at certain points but for the rest it doesn't work. What am I doing wrong and how can I fix it?
View 3 Replies View RelatedSo every time I got to edit my movie in FCP i lose 3 GBS of space... I have multiple render files for my project. Do i only need one? Can I delete all of them and create a render file after that so I only have one. Does it auto create render files? Does it delete stuff in the project if you delete it?
View 3 Replies View RelatedI am running Final Cut Pro 7 and I have a clip that already has RGB Balance filter and Key filter on it. I am adding Brightness Contrast or any of the other Gamma Correction type filters to the clip, It lets me adjust the filter but when I render it this filter is not included in the render. I have done some experimenting and it seems that the RGB balance is what is stopping this filter from being applied.
I have tried with all the possible filters that will let me adjust the levels on the image, I have tried taking the clip with the first two filters and nesting it then applying the new filter to the nested clip but nothing seems to work. This clip is too dark...
Info:
OS X Mavericks (10.9.3)
Running FCP X 10.1.2 ... I wanted to verify a few things with the community about media mgmt that the white paper really doesn't explain to well. My archiving procedure is as follows:
I import media to an Event to offload footage from camera/card. I then close FCP X, open the finder and open the library and "show package contents" and then pick the original media folder. I then copy that folder to another offsite drive I have dated by year -> folder.
Example: 2014 - Footage from Colorado. (I do this to always store my original media outside any project I'm working on for future reference. This is ok, correct? Is there a better way?)
Second, I learned the other day that if I want to archive/backup libraries or even clean up the library,it is good practice to remove all rendered/transcoded media files. It is pretty simple from the "file" menu to do this. Question, if I just removed the rendered media, how long does it take again before FCP X background tasks starts working / rendering media again? Do I stop this somehow so I have time to backup the library? I thought this process was automated after a few seconds?
Info:
iMac, OS X Mavericks (10.9)
I updated my Final Cut Pro X to version 10.1.3. Now if i want to create a project and ad clips, these clips are not rendering.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
I've been working on some making some video clips that are ipod commericals (to eventually do the whole thing on imovie) but after 4-5 videos being finished, I work on the next one and right in the middle of rendering, it just freezes and doesn't do anything else, or when I try to just export it it does that, but before it works fine. I tried removing a couple extra effects I aded, and it still does it.
View 2 Replies View RelatedWhen using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...
Info:
iMac (27-inch Mid 2011), OS X Yosemite (10.10.1), 2.7 GHz Intel Core i5, 4 GB 1333MHz
I wrongly assumed that when you go to system settings to select the scratch disks (root folder where all the audio and video render folders and files go, capture files, etc.) that Final Cut would save the folder locations within the FC project you are working in. Makes total sense, but for reasons I don't understand, FC does NOT save these folder locations and the result is that I have render files scattered all over the place on my hard drive and it is quite a mess! Fortunately, the project file remembers where it put the render files, so as long as you don't remove or rename any project folders, everything shows up rendered on the time line as it should. The problem is, if I'm working on several projects at once, I have to reset the scratch disks every time I reopen a project, otherwise the program will save it to the last scratch location selected and put all of the render files in another project's folder. I often forget to reset the scratch disks when I'm busy and now I have render files mixed up in various project folders.
Why can't you just set the scratch disks one time when you first set up the project and have the project always remember that location, instead of always having to reset them every time you reopen a project. I love Final Cut, but this is a product defect that should be addressed and corrected. If the project file can remember where it is putting all the render files, it should also be capable of remembering the scratch disk locations you originally selected when you first set up the project or better yet, save it to the project's root folder by default.
Info:
Mac Pro, Mac OS X (10.6.5)
I just opened a FC project in 6.0 from an XML file for the first time. The project originally came from 6.0.6 and I was happy to see that this kind of reversion was actually possible. Unfortunatly after doing a little work I started getting "general error" messages whenever I tried to save the project or render any transitions.
If I remeber correctly, I opened the XML and was asked to save a new project. I saved the project and started working. I dont remeber if any saves or rendering had worked in the new project before I got the error messages. Maybe none of them worked, I am not sure.
How come every time I drag something on my timeline I have to render? If I expand or move it on the timeline I have to render again. It's really a pain and I was told it shouldn't be doing this.
Also, I imported my video onto Color to do some correction and when I send it back to Final Cut Pro, it's very small. I tried changing the geometry but it's still not as big as the original.
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
Can someone tell me how to configure Time Machine so it doesn't do a complete backup every time?I seem to get constant errors because my disk space fills up quickly. For some reason I don't think it did this when I first started using it. I use SuperDuper also, but have a drive connected to my iMac all the time for Time Machine.
View 1 Replies View Relatedhave a MacBook Pro 15" 10.7.4 which isn't working with TimeMachine any more When starting a backup, Time Machine tells me to backup 112kB (for example) .... an running and running, and after a short time "2kB from 112kB" ... and runnig and running and then "5kb from 112kB" and so on. The progress status is updating very slowly.
The weired thing is: the ".inProgress" file on the external hard drive (tried FireWire and USB connection) is growing to 85GB (the total used space on the hard drive) while Time machine status tells me it has saved some kB. And every backup is running in that way. Instead of backing up only the difference, all files where backuped - although the status is displaying a few 100kB - which should be the right size to backup.
- Repaired permissions > Same error
- Tried installing combo update > Same error
- Tried another external hard drive > Same error
- Tried cloning system to different hd > Same error
- excluded the Users home folder > Same error
- Interal hard drive speed > Over 70MB/s > OK
- External hard drive speed > Over 70 MB/s > OK
So had to be something with the System itself.
I can't make the left/right audio edge command working. I set it up in my custom way but any command I set for it, it doesn't work here (if I type the command the audio clip is simply deselected).
Info:
Final Cut Pro X, OS X Mavericks (10.9.2), 10.1
I import clips from a flash memory drive (the one attached to Sony NX5U camera). The drive is connected with USB cable. All clips imported are fine except one. The problematic one is in the AVCHD category in the browser and has a little camera icon on the bottom left of it's thumbnail. I cannot share the project containing that clip (there is a message that says:''this Item cannot be shared while it is still referencing media on the camera''). What does that icon mean and how do I import the clip properly ? I tried importing the clip again and it does the same thing...
Info:
Final Cut Pro X, Mac OS X (10.7.5)
My superdrive in my macbook pro kicked the bucket and I have to hand the whole thing over to apple to fix. Following the advise of many people online, I will be wiping my hard drive before dropping the machine at their doorstep. I have the machine backed up via Time Machine on an external drive. Will I be able to restore it to its current state using Time Machine and my backup after it returns from Apple.
I have sensitive and important data on the laptop...this is why I need to be sure to get it all back.
My 1st Gen Time Capsule cannot complete a backup using Time Machine. TM says that the disk is not available, yet, it is mounted and I did a Disk Verify on it and it was "OK." Is this a sign of issues with the TC, itself? There hasn't been a backup done in 2 weeks AND internet speeds have been up and down during that time as well. I thought it might be my old "modem" or my ISP, but now I am thinking it might be the TC. If it dies, I think I might just get an AE and get a USB HDD for TM backups in addition to my weekly clones. It is too bad that Apple doesn't support TM backups on the AE and a USB HDD.
View 4 Replies View RelatedI have an Imac 24" and a Mybook external HDD. ever since Leopard came out Ive been doing backups with time machine, then one day I start time machine for my weekly backup and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume." Now I notice that my external HDD was almost not spinning while time machine was trying to backup the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow and stoped at something like maybe 10 mb I started time machine again same message. I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again same problem. then I said to myself maybe my External HDD has problems so I even formated the HDD, then stated Time machine again this time it was running smoothly just like before I had the problem but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process. Now hope I dont need a clean install of my Mac OSX or maybe its my external HDD. maybe my USB having problems?
View 7 Replies View RelatedI'm using Time Machine which makes periodic backups of my data to Time Capsule a couple times a day. If I had a problem with my computer would I be able to completely restore all of the data like the way it was?
View 3 Replies View RelatedAlright, I just got my macbook fixed, the service people changed my macbook's harddisc, but now I can't complete a time machine backup anymore.
View 2 Replies View RelatedTime machine cannot complete my backup because 'an error occurred while creating the backup folder'.
Info:iMac, Mac OS X (10.7.2)
Files can’t be copied onto the backup disk because it appears to be read-only. You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk. Why is Time Machine insisting my drive is Read-only, when in fact it isn't? This is becoming a routine occurrence. What's troubling is the problem is easy enough to resolve by simply unmounting/mounting the Time Machine drive and selecting Back Up Now from the menu and it purrs like a kitten.
After performing the step outlined above, my latest Time Machine backup is tucked neatly away and everything is fine once more.
Info:
24-inch iMac 2.8GHz (early 2007), Mac OS X (10.7.2)
Backup to Time Capsule will not complete. This just started happening about a month ago. It used to work fine. I have tried deleting prior backups and reformatting the Time Capsule.
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
I have an Imac 24" and a Mybook external HDD. Ever since Leopard came out Ive been doing backups with time machine, then ...one day..I start time machine for my weekly backup..and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume."
Now I notice that my external HDD was almost not spinning while time machine was trying to backup ... the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow .... and stoped at something like maybe 10 mb ...
I started time machine again ... same message.
I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again ... same problem ....
Then I said to myself ... maybe my External HDD has problems ... so I even formated the HDD, then stated Time machine again ... this time it was running smoothly just like before I had the problem ... but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process.
Now ... I hope I dont need a clean install of my Mac OSX ... or maybe its my external HDD ... maybe my USB having problems?
I recently attached a WD 320G external drive and am trying to use it to back up with time machine. However everytime i start to back up, time machine quits before finishing. I used time machine buddy and this is the message that i got:
Starting standard backup
Backing up to: /Volumes/G4 Time Machine/Backups.backupdb
No pre-backup thinning needed: 56.78 GB requested (including padding), 159.78 GB available
Waiting for index to be ready (101)
2012-05-15 13:36:06.986 ReportCrash[3227:2907] Saved crash report for backupd[3233] version ??? (???) to /Library/Logs/DiagnosticReports/backupd_2012-05-15-133606_localhost.crash
For now I have used Carbon Copy Cloner just to have a back up, but would like to have Time Machine for automated back ups.
Info:
iMac 2.4 GHz Intel Core 2 Duo, Mac OS X (10.5.6), MacBook 1.83 GHz Intel Core Duo 1GB 667 MHz DDR2 SDRAM
I have moved a network time machine backup disk to a new computer. Now when the time machine starts a backup it produces an error message: "Time machine could not complete the backup. An error occured while creating the backup folder."
Info:
Mac mini, Mac OS X (10.6.8)
So I finally got around to getting a 1tb drive to hook up to my airport extreme to do TM backups. I have ~420gb to backup on my mbp's hard drive. To avoid an absurdly long backup, I did the initial backup via usb (took the better part of the day).
Just now I was excited because it finished - I hooked the drive up to the extreme, mounted the drive so that it would show up as an option in the TM pref pane for a backup disk, and thought I was good to go. However, when I tried to get TM to do a backup so I could see it work (by selecting Back Up Now from the menubar), it took a ridiculously long time "preparing" and I saw that it was trying to create a whole new TM backup on the drive based on my computer's network name. It even had the audacity to think that the previous backup file was ~2gb, which freaked me out because I thought it had deleted it. But sure enough when I canceled the new backup and hooked it up to my mbp again, the backup was the correct size.
I recently (2 months ago) got a 17" MBP, and I used Target Disk/Firewire to "clone" the contents of my 2 year old iMac onto it. It all worked great, and went fine, however last night I attempted to use Boot Camp to create a 64GB partition to install Windows 7, and got the dreaded "The disk cannot be partitioned" error, "please format your HD and reinstall OS X" message.
I ran various tools (Disk Utility from OS X Install DVD, Disk Warrior, MainMenu, Onyx, etc) to try repair and perform maintenance, then I bought iDefrag and ran a full defrag overnight, but this morning I noticed it had failed half way through, and it too suggested reformatting the HD.
I have a full Time Machine backup on my 1TB USB drive (connected to my Mac Mini, it backs up to the MBP over the network) so my question is how easy is to it completely format my MBP hard disk and restore a complete Time Machine backup? I'm completely panicking even about the though of it, I've never done a reinstall/format since I switched to Macs in July 2008!!
I have time machine running as well as Parallels installed. Every time Time Machine backs up it does a minimum of 18.4GB. I 100% do not have that many changes each hour. BTW, running Snow Leopard. I have a screen shot of all the items I have excluded, but it still is doing it.
