OS X :: Time Machine - Unable To Complete Backup
Dec 30, 2008
I have an Imac 24" and a Mybook external HDD. ever since Leopard came out Ive been doing backups with time machine, then one day I start time machine for my weekly backup and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume." Now I notice that my external HDD was almost not spinning while time machine was trying to backup the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow and stoped at something like maybe 10 mb I started time machine again same message. I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again same problem. then I said to myself maybe my External HDD has problems so I even formated the HDD, then stated Time machine again this time it was running smoothly just like before I had the problem but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process. Now hope I dont need a clean install of my Mac OSX or maybe its my external HDD. maybe my USB having problems?
View 7 Replies
ADVERTISEMENT
Aug 5, 2010
I have an Imac 24" and a Mybook external HDD. Ever since Leopard came out Ive been doing backups with time machine, then ...one day..I start time machine for my weekly backup..and this message comes up: "Unable to complete backup. An error occurred while copying files to the backup volume."
Now I notice that my external HDD was almost not spinning while time machine was trying to backup ... the status bar of time machine saying how much files need to be copied and the total amount of space needed was super slow .... and stoped at something like maybe 10 mb ...
I started time machine again ... same message.
I though maybe Mac OSX needed some permission repaires. So I did just that and after that did time machine again ... same problem ....
Then I said to myself ... maybe my External HDD has problems ... so I even formated the HDD, then stated Time machine again ... this time it was running smoothly just like before I had the problem ... but the problem came back after 6 gig being copied out of the 25 gig needed to complete the backup process.
Now ... I hope I dont need a clean install of my Mac OSX ... or maybe its my external HDD ... maybe my USB having problems?
View 2 Replies
View Related
Feb 13, 2009
So I finally got around to getting a 1tb drive to hook up to my airport extreme to do TM backups. I have ~420gb to backup on my mbp's hard drive. To avoid an absurdly long backup, I did the initial backup via usb (took the better part of the day).
Just now I was excited because it finished - I hooked the drive up to the extreme, mounted the drive so that it would show up as an option in the TM pref pane for a backup disk, and thought I was good to go. However, when I tried to get TM to do a backup so I could see it work (by selecting Back Up Now from the menubar), it took a ridiculously long time "preparing" and I saw that it was trying to create a whole new TM backup on the drive based on my computer's network name. It even had the audacity to think that the previous backup file was ~2gb, which freaked me out because I thought it had deleted it. But sure enough when I canceled the new backup and hooked it up to my mbp again, the backup was the correct size.
View 10 Replies
View Related
Aug 29, 2014
iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
During Backup the sistem get stack and display into the "details window" Time machine was unable to complete the backup because unable to complete the backup folder.
This problem happens with USB and Fire Wire. The file backups.backupdb is excluded from virus scanning.
Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is displayed.
This two problems are independent une to the other. I have change the backup disk but both the problems persist.
Info:
iMac, OS X Mavericks (10.9.4), 8GB ram ; external backup HD
View 3 Replies
View Related
Jun 19, 2014
MacBook Pro mid-2012, 8GB RAM, 750GB hard drive, Mac OS X 10.8.5
One Time Capsule at home
One Time Capsule in vacation home
MBP backs up everything on internal hard drive to Time Capsule at home, where we live during summer and spring. When moving to vacation home in fall and winter, MBP backs up everything to Time Capsule in vacation home.
During the 6 months at each residence, the backups work great to the Time Capsule at that particular house. However, after some time (maybe a week?), Time Machine displays an error in Notification Center: "Time Machine can't complete backup to Home Time Capsule" (when in vacation home) or "Time Machine can't complete backup to Vacation Time Capsule" (when at home).
It's obvious that this occurs because Time Machine was set to back up to 2 Time Capsules and expects both of them to be reachable. Is there a way to suppress these Time Machine errors for the time that we're away from one of the Time Capsules?
View 5 Replies
View Related
Mar 7, 2009
Can someone tell me how to configure Time Machine so it doesn't do a complete backup every time?I seem to get constant errors because my disk space fills up quickly. For some reason I don't think it did this when I first started using it. I use SuperDuper also, but have a drive connected to my iMac all the time for Time Machine.
View 1 Replies
View Related
Oct 5, 2009
Alright, I just got my macbook fixed, the service people changed my macbook's harddisc, but now I can't complete a time machine backup anymore.
View 2 Replies
View Related
Jan 31, 2012
Time machine cannot complete my backup because 'an error occurred while creating the backup folder'.
Info:iMac, Mac OS X (10.7.2)
View 14 Replies
View Related
Mar 24, 2012
Files can’t be copied onto the backup disk because it appears to be read-only. You may need to repair or reformat the disk using Disk Utility. If the disk can’t be repaired, you must use a different disk for backups. Open Time Machine preferences to select a different backup disk. Why is Time Machine insisting my drive is Read-only, when in fact it isn't? This is becoming a routine occurrence. What's troubling is the problem is easy enough to resolve by simply unmounting/mounting the Time Machine drive and selecting Back Up Now from the menu and it purrs like a kitten.
After performing the step outlined above, my latest Time Machine backup is tucked neatly away and everything is fine once more.
Info:
24-inch iMac 2.8GHz (early 2007), Mac OS X (10.7.2)
View 14 Replies
View Related
May 30, 2012
Backup to Time Capsule will not complete. This just started happening about a month ago. It used to work fine. I have tried deleting prior backups and reformatting the Time Capsule.
Info:
MacBook Air (13-inch Late 2010), Mac OS X (10.7.3)
View 9 Replies
View Related
Jun 25, 2012
have a MacBook Pro 15" 10.7.4 which isn't working with TimeMachine any more When starting a backup, Time Machine tells me to backup 112kB (for example) .... an running and running, and after a short time "2kB from 112kB" ... and runnig and running and then "5kb from 112kB" and so on. The progress status is updating very slowly.
The weired thing is: the ".inProgress" file on the external hard drive (tried FireWire and USB connection) is growing to 85GB (the total used space on the hard drive) while Time machine status tells me it has saved some kB. And every backup is running in that way. Instead of backing up only the difference, all files where backuped - although the status is displaying a few 100kB - which should be the right size to backup.
- Repaired permissions > Same error
- Tried installing combo update > Same error
- Tried another external hard drive > Same error
- Tried cloning system to different hd > Same error
- excluded the Users home folder > Same error
- Interal hard drive speed > Over 70MB/s > OK
- External hard drive speed > Over 70 MB/s > OK
So had to be something with the System itself.
View 1 Replies
View Related
May 18, 2012
I have moved a network time machine backup disk to a new computer. Now when the time machine starts a backup it produces an error message: "Time machine could not complete the backup. An error occured while creating the backup folder."
Info:
Mac mini, Mac OS X (10.6.8)
View 1 Replies
View Related
May 27, 2009
I'm using Time Machine which makes periodic backups of my data to Time Capsule a couple times a day. If I had a problem with my computer would I be able to completely restore all of the data like the way it was?
View 3 Replies
View Related
Oct 26, 2008
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
View 3 Replies
View Related
Jul 14, 2010
I have time machine running as well as Parallels installed. Every time Time Machine backs up it does a minimum of 18.4GB. I 100% do not have that many changes each hour. BTW, running Snow Leopard. I have a screen shot of all the items I have excluded, but it still is doing it.
View 1 Replies
View Related
Jun 12, 2012
I'm using 10.5.8 and Time Machine on a time capsule which should have enough space. I've unchecked the "ask before deleting" option in Time Machine but no dice. I suspect that the problem stems from when I copied my iTunes folder into my public folder so that I can share among user accounts. It's not a copy of the folder but rather I moved it. Still, I think that time machine is trying to hold onto two copies.
Info:
iMac (24-inch Early 2009), Mac OS X (10.5.8)
View 5 Replies
View Related
May 1, 2008
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
View 1 Replies
View Related
May 3, 2009
I have a 1tb external for time machine back up and have about 750 gb of stuff to back up. I was under the impression that when time machine backs up my stuff it will automatically delete the oldest backup to create room for the newer backup.
My problem is that i did a back up a couple weeks ago and then today i go to back up and it tells me back up failed only 718gb available for 740gb of stuff to back up
anyone have this problem? how can i fix it?
View 1 Replies
View Related
Jul 2, 2012
TIME MACHINE ERROR:Unable to complete backup, An error occurred while creating the backup folder.
Info:
iMac, Mac OS X (10.7.4)
View 1 Replies
View Related
Sep 6, 2014
Running OS X 10.8.5
Trying to backup to Passport Time machine. Has worked fine until a few days ago.
View 1 Replies
View Related
Mar 2, 2009
I'm trying to restore my files from time machine and I chose only to transfer my files and it seemed to do that but how do I access them now and put my pictures in iphoto and music in itunes?
View 7 Replies
View Related
Sep 11, 2010
I recently used time machine for the first time in a long time. I use my external HD USB for the backup. After the back up was complete, I unplugged the USB cable. I got an error that I needed to put the HD away first (I wasn't thinking). And I didn't pay attention to the error either.
I thought the data was gone, when I didnt see the data in the back up file. I do see the back up file with that date on it. In the file is the .InProgress file. In that file, on right clicking, I see the contents of one folder. This folder has a very long name of numbers and letters. It shows no contents in the finder. THough I know the files must be here. The HD has capacity of 100 Gig. There is only about 20 gigs showing on it. Though there is only 20 gigs available. So, my back up data is there on the HD, and I assume it's in this "empty" file.
* How do I extract the saved files ?
View 4 Replies
View Related
Nov 20, 2008
I have 10.4.11 installed and have some time machine backups from a leopard system on one of my externals. When I try to navigate to one of the backups and get into any of the user folders like documents, pictures, etc it says I don't have permission to access them? Yet I check the permissions and they are read/write.
View 2 Replies
View Related
Dec 1, 2014
My time machine hasn't backed up since November 22. Every time it went for it's scheduled back-up it skipped and went to the next scheduled backup. When I tried to reconfigure the time capsule it won't let me select the disk that I would like to use for the time machine. Everything else is working fine (airport wifi at least). Here are some screenshots:
View 1 Replies
View Related
Jan 7, 2011
I've purchased a 2TB external drive, I downloaded and installed macfuse and ntfs-3g AND tuxera ntfs and I formatted the drive to ntfs. Everything was working perfectly (reading and writing) until I unplugged the drive form my computer. So when I plugged the drive back in, it could only read and no longer can write information.
What is going on? I didn't even turn off my computer, the only thing I did was backup my computer with time machine (onto a separate drive not the NTFS one) and plug the new drive back in. I've reinstalled all 3 programs and restarted my computer but nothing seems to be working.
View 1 Replies
View Related
Nov 23, 2008
Any clues to this error... I've been getting it fairly frequently as of late. Probably every few days.
Unable to complete backup. An error occurred while copying files to the backup volume.
View 6 Replies
View Related
Jan 1, 2009
I've spent a good deal of time over three days trying to do something that I think is both doable and shouldn't be all that hard. I have a 750gb external HD attached to a Mini, and I'd like to use that drive to do TM backups for the Mini, as well as three MacBooks.
But I can't seem to get access to the backup drive from the laptops to either get going in the first place, or to remain available for TM. I get "volume can't be mounted" errors, "image can't be mounted errors", etc. I find that I can't ever eject the backup drive from the Mini (always told an application is using it...even if I've just booted up the Mini). And with one of the MacBooks, even a direct FW connection to the drive doesn't result in the drive showing up in Finder.
Isn't this a pretty straightforward thing to do? Is there a step by step somewhere that might help me figure out what I'm doing wrong, or what I need to fix? Should I reformat the drive again and start over (there are no important backups on it yet)? By the way, the drive is formatted Mac OS Extended (Journaled).
View 1 Replies
View Related
Mar 14, 2009
I'm having trouble backing up with Time Machine. Here's the setup:
1. Three, 1TB external hard drives in a concatenated software RAID. This means that they are treated as one large drive. There is no mirroring, no increased data rate, blah blah blah. It's just three hard drives in the place of one. I am aware that this means my backup is three times as likely to fail with the hardware, but that's OK.
2. These three are connected to a USB hub.
3. This hub is connected to a G5 tower. The G5 tower can back up to the concatenated drives (I'll call them just a RAID from here on), and also all additional external hard drives that I connect to the G5 tower have been backing up to the RAID no problem. This is great.
Here's the problem:
I'm trying to get two more computers to back up to the RAID wirelessly. I read a lot online about how this didn't used to be a supported feature (backing up to an external hard drive over a network with time machine), but that Apple has recently upgraded Time Machine to support this functionality.
The first computer I started with to try to backup over the network was a Macbook Pro, trying to get it to backup to this RAID. It can see the RAID over the network, mount it, copy files to it/read it, but CANNOT time machine backup to it. I select the network RAID as the backup device, hit "back up now," then get this message:
"The external volume cannot be mounted."
This is really bizzare, considering that it is mounted, and that I can copy to it. Just for your information, I have an airport extreme wireless network that has been working beautifully, no Keychain access issues, no 3rd party firewall, nothing. I've run through Applecare on this issue: the MacBook Pro has never done ANY time machine backup on the RAID, not even a partial one, so there's no dangling sparse bundle or backup folder or anything like that. All network permissions check out, etc. I've tried repairing the RAID with disk utility, as well as repairing permissions (although I have not done either of these things to the MacBookPro).
The latest thing I tried was plugging the RAID directly into the Macbook Pro. Here's where I got the first clue (at least I think so)...Plugged DIRECTLY into the MacBook Pro, the RAID will mount, but the MacBook Pro WILL NOT backup to the RAID. It gives me the same message: the selected volume cannot be mounted. Again, this is strange considering that, just like when I am viewing the RAID over the network, plugged directly into the MacBook Pro the RAID will mount, I can read it, copy files to it, etc.
I have considered plugging the RAID into the Airport extreme directly, but first of all this would mean much slower transfer speeds with the G5 tower, which is a big issue considering the files I am backing up every day, and two, since it seems that the RAID won't be recognized by the MacBook Pro even when plugged in directly, I'm thinking that this is a more fundamental issue.
View 7 Replies
View Related
Aug 2, 2009
Time machine is having problems backing up to my La Cie drive. It will start and then show the progress, but it stalls at a very low #(256 kb, for example).
Left it to do its stuff overnight and it never budged. Pulled this off of the console (after reading some other posts). Not sure if this is associated w/the problem, though.
8/2/09 10:28:45 AM mds[34] (Error) Import: importer:0x872000 Importer start failed for 89 (kr:268435459 (ipc/send) invalid destination port)
This error was reported pretty much every 4 seconds.
I erased and reformatted (mac os extended, journaled) the La Cie but that did not seem to work.
View 4 Replies
View Related
Apr 1, 2009
I have been the proud owner of a Macbook Pro 2.5Ghz with 4GB RAM, running Leopard 10.5.6 for just under a year and I have never been able to get Time Machine to backup my files properly. Instead I have been backing up my really important files manually to an external NAS drive.
However, I would like to back up all files to an external USB drive using Time Machine. I have a Freecom USB2 drive which I purposely bought, but when I try to perform the initial back up I get a message telling me there isn't enough space.
My MacBook has a 250Gb HDD and my USB drive is 500Gb (465Gb available), so I have no idea why I am getting this message. I have ensured that no other devices are connected in case it was also trying to back up those (USB & NAS drive), but still get the same message. It says I need 698Gb of space to perform the full backup - where is it getting this from?!
Within the options it shows me a panel containing an entry 'Time Machine Backups' with a size of 154.4Mb, which I'm guessing is the directory that I am trying to save the backups to.
I'm probably doing something obviously stupid but would appreciate it if somebody could point it out for me.
View 5 Replies
View Related
