I have tried to copy a consolidated library (156GB) to another drive. I have tried this twice and everything seems to be there, however when I play the project, the sound drops out in many places. (Both dialog and music tracks) Is there a way to copy the library to a new drive and not have problems? Should I "copy events to to a new library"?
View 11 RepliesI have a Mac Pro, 2 x 2.66 GHZ 6-Core Intel Xeon machine with 24 GB of 1333 MHZ DDR3 memory.
I have both miniDV videotapes recorded on camcorders as well as on JVC recorder. I also have S-VHS videotapes recorded on the JVC recorder (which is a dual recorder, with the miniDV deck on the left and S-VHS deck on the right)
Whenever I try to import video from either deck (or from a Canon Elura camcorder) into FCP X, I get thousands of separate clips ranging from a few tenths of a second in length to 20 seconds or so in length. When these clips are loaded into the timeline, there is a video and audio stutter whenever the playback cursor crosses between adjacent clips, indicating that a frame or two or more has been dropped. Making a compound clip is no luck, the stuttering due to dropped frames persists. This makes it completely impossible to edit since no clip is long enough to be usable.
The dropped frames seem to be due to the program, not the cameras, tape deck or videotapes since the problem occurs across all camera platforms as well as the two videotape formats. It's as if FCP X has a hair trigger in identifying some variance in frame rates that it judges to be a dropped frame, and immediately terminates the import of that little clip and goes on to the next import, only to repeat the same process THOUSANDS OF TIMES. The problem persists whether I record imports to my SSD startup disk, to my internal RAID, or to peripheral disks.
This did not happen in previous versions of FCP using the exact same video equipment and tape formats but a different computer. There seems to be no way to tell FCP X to ignore any variation of time code and I'm concerned that this problem will render my current equipment and videotapes worthless.
I have two drives open. I've created different Libraries, one for each drive. I want to move a 'project' or a 'clip' from one Library/drive to another. I drag and drop. Will the project/clip moving from one Library/drive to another bring in the relevant original media? (And I believe I have to recreate any Proxy files, is that right?) And will the original media (copied) now be found in the importing Library? Or in the folders I've set up for THAT Library. I've been trying to keep my media in separate folders so my Libraries open fast.
That would be a related question perhaps? I'm trying to keep my Libraries small, so they open and close fast; and can be backed up on another 'small' drive; and my assumption has been that if I put my original media, project backups etc., assigned to designated folders (NOT in the Library file) that this will be the case - faster working with the Libraries, smaller Library files I can back up on other drives.
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
When I add media files into an event by dragging and dropping the file into the project the file does not get moved/copied 'Macintosh's HD Projects' folder.
Is there a setting somewhere I can change so dragging and dropping behaves the same way as when I use CMD+I to import a file?
I am using the most up-to-date version of FCPX in Mavericks.
I have a iMac OSX 10.5.8 2.4 GHz Intel Core 2 Duo and I am trying to copy my entire library contents in iPhoto to a Western Digital My Book Essential 2.0 (1TB capacity). I am fairly computer literate but kinda not.
How do I copy all my photos (21K photos & 102GB worth) which are mostly RAW format onto the WD external drive?
I need to copy my iTunes library from an old iPod. Is there anyway to do this and keep all the metadata like play count, date added, date last played and the ratings?
Info:
Mac mini (Mid 2011), Mac OS X (10.7.4)
I have an itunes music folder with songs and movies. I want to create a new library using those files. How do i add them without copying them to the new library? When i do the"add to library" it starts copying the flies causing an error because there's not enough disk space.
View 1 Replies View RelatedTime machine keeps copying the whole itunes library. Again, again, again. That used to be different, time machine used to just back up the changes.
So I erased the itunes library from time machine & restored 1 TB (!!!). I would like to have time machine back up the itunes library once, then just the changes. Is that possible?
Info:
iMac, Mac OS X (10.6.8), iLife08, iWork09
I want to copy my iTunes library from one external drive (currently connected to an iBook) to a 2nd external drive (connected to an eMac). The library is almost 60GB and so can not fit on either machine's hard drive.
The music currently plays through the iBook from the first external drive.
I want to be able to play the same music on the eMac (through the 2nd external drive).
Which is the best way to go about this?
Should I:
a) Connect the 1st external drive to the eMac and manually drag and drop the music from there to the 2nd external drive, or
b)Use Silverkeeper Basckup and do a backup of the Music folder in the 1st drive to the 2nd drive, after connecting the 1st to the eMac?
or is there not much difference in doing either? Or is there a more efficient option using iTunes?
I had to restore my library a while ago...no problem, dragged it onto the desktop, iTunes rebuilt it from the .xml file and everything was fine...only problem is now I'm trying to tidy up my desktop and those two pesky library files won't stay deleted from the desktop no matter how man times I trash them...Now, I understand the library file needs to update itself and all, but why can't it keep it's business confined to the iTunes folder?
View 4 Replies View RelatedI am trying to copy the iPhoto library to my newly installed NAS drive. I have 2 libraries (3.6gb and 16.8gb). The smaller one copied across no problem but when copying the second I get an error 36 after it has copied 30mb of data.
I have tried all avenues:
- Restarted iPhoto holding down alt and opt and repairing permissions.
- Rebuilt library using iPhoto Library Manager
But I still get the same message. I have backed up the whole Mac using Superduper to a small external drive and that works fine.Part of the reason I bought the NAS drive was to back up photos, and now it doesn't work!
Also, I do when checking Console I get the following message regularly:
12/05/2012 09:16:22.050 fseventsd: scan_old: bailing out because device mounted @ /Volumes/Buffalo_Cloud has dls 0x0 and dls->fci 0x0
Info:
iMac, Mac OS X (10.7.3)
I want to copy music from Cassette Tapes to my iTunes library. I have white/yellow RCA sockets on the back of the tape player, and cable with white/yellow RCA jacks to 1/8 RCA jack. Can I connect the 1/8 RCA jack to the 'input' on my Mac Book Pro. Will this copy the music to the iTunes library?
Info:
MacBook Pro, Mac OS X (10.5.8), Cable as described in question
I got a WD10EALX Cabiar Blue drive last week and copied my existing internal drive that had Tiger OSX on it. It booted fine until I copied an iphoto library from a friend's Mac and now this disk won't boot. I get the circle with the slash through it and the folder with the question mark on it. I ran it through disk utility and it was verified with no problems.
Western Digital Caviar Blue 1 TB,7200 RPM (WD10EALX) Hard Drive
Info:
Mac Pro, Mac OS X (10.4.11)
I have some large video files on an external drive, and I'd like to put them on my iPhone. I have very limited hard drive space on my computer, so I'd rather not copy all of the files onto my iTunes library. Is there any way to transfer the files directly onto my iPhone from the external drive?
Info:
Macbook, Mac OS X (10.4.10)
I am trying to copy my aperture 3 library (126GB) to an external hard drive to free up space on my local hard drive.
When it is at the final 1gb of the process I recieve an error message:
"The Finder can’t complete the operation because some data in “Aperture 3 Library” can’t be read or written.
(Error code -36)"
I have repaired the aperture library and repaired permissions and this did not work.
I'm running 10.9.3
I am willing to save on my hard disk the content of a SD card that contains mts files that I can access via AVCHD, BDMV, STREAM.
When I copy the whole SD card to save on my hard disk, I get an error message saying that the copy cannot proceed because one of the file contains information that cannot be read.
I was told on this group, that changing the structure of the AVCHD folder should not be changed. Can I delete the file that contains a bug ? or will I screw up the AVCHD folder ?
Trying to backup my library in fcp x, followed the instructions on how to do so, but then I get an error saying There isn’t enough disk space to Consolidate Library Files. How much space do I need?
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.2)
I inadvertently changed the Library name of an FCP X file in the Finder Window and now FCP X won't open. I immediately changed it back to the original name, and FCP X still won't open. The FCP X logo comes up, and then the app seems to freeze and not open.
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
I am unable to open a FCPX library (containing at least 10 projects and events). Final Cut attempts to load the events and projects in the library but after about 5 minutes the program shuts down and I get an Apple message giving me the option to report the problem.
All other libraries appear to work fine. I am guessing that the last project created within the affected library is corrupt. i have tried removing the render files in that last p and I have copied the library to another drive and neither worked.
Info:
MacBook Pro, OS X Mavericks (10.9.4), Processor - 2.2 ghz intel core i7
We have ordered and installed FCP X .....except on 2 machines we are unable to create new libraries. When I click on File, it only gives us options to create a New Project or New Event.
Info:
Final Cut Pro X, OS X Mavericks (10.9.2)
When I click the little triangle next to the event in the library, it spins downward and no video files show. It's my second project for a new company and on a brand new computer with a new install of final cut pro X and glitches are already starting to show.
View 1 Replies View RelatedI have a lot of storage space on my computer, but i still can't start a new project. I do command N or File --> New Project and it just makes a sad little bloop and doesn't do anything. It doesn't give me message or anything on why i can't start a new project.
Info:
Final Cut Pro X, OS X Mavericks (10.9.4)
I have one library that I am unable to open. It worked fine yesterday but now it just hangs with a message 'Loading "XYZ" event'. Even its backups in the Movies folder won't open. All the other libraries I've tried to open do so without any problem, so it seems the trouble is restricted to this one library and its backups.
View 8 Replies View RelatedI generated a generators template in motion with some graphics and imported sound effect from FCP.
When I use the template I see the graphics but there is no sound.
Info:
MacBook Air (13-inch Mid 2012), OS X Mavericks (10.9.2)
I recorded the show using Garage Band by plugging in an external sound card and getting the music that was send to the speakers in the room. Now I'm trying to edit the show but when I put my recorded music under the filmed video the doesn't seem to match... I'ts just like the audio is a little faster, which makes it unable to get the playing in sinc...
Info:
Final Cut Pro X, OS X Mountain Lion (10.8.4)
I have a strange thing happening when I attempt to update a Final Cut Project and Event from FCPX 10.9. I'm choosing to update manually. When I tell FCPX to go ahead and update, everything looks like it is happening as planned - except that inside of Final Cut the Project files are no where to be found. I know Final Cut is supposed to put them into an Event created especially for the old Projects. But when I look for it there are no project files. When I look at what actually took place at the finder level I find that all the Events have been moved just fine but the old Project Folder is left alone and still intact. 
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
I updated everything to FCPX 10.1.1.
Some clips became unlinked. I go to link them ... and am stopped dead by the NEW Library Icon (with all it's internal folders no longer seemingly accessible). I know the file is in there - if I do a search in Finder for the missing media, it takes me right to where it is.
When I do a relink, stopped dead in my tracks by the new format. How do I access the folders hidden in the new Project Library to relink my clips with their original media?
Info:
MacBook Pro (15-inch Glossy), Mac OS X (10.6.8)
Working on an iMac with a FCX library that links to an external media folder which has all my video. I'm not using managed media, but external links to the video source footage.
I make an exact duplicate copy of my FCX library on a USB drive, including the external media folder with all my video clips -- using the same folder structure and everything, But when I move that to another computer (MacBook Pro), open the exact same FCX library, open the same project -- I get missing links on every clip on my timeline. The library doesn't connect to the external media folder.
Re-linking causes an error and doesn't work either. The FCX library just won't take my "external media" folder which it links to fine on my iMac. All my projects on my MacBook Pro, have red "missing file" icons instead of the clips.
Running FCX 10.1.4. and Yosemite.
Info:
iMac, OS X Mountain Lion
Fcpx editing error, library not open，The backup file is not open。
View 1 Replies View RelatedI am trying to import a library of my Mac Book Pro to My Imac (FCPX 10.1.3).
When I try to open it in my iMac, all the clips are ok in the browser but the project is not working, see image ....
