I can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.
Info:
Mac Pro (Early 2008), OS X Mavericks (10.9.4)
I recently shot some footage on a Canon C300 and would like to edit it on FCP 7, problem is it seems since my computer did the upgrade to mavericks I can no longer find the appropriate driver on the Canon site as Mavericks is not supported by Canon for this particular update.
After researching I found that mxf files can be transcoded in log and capture but you need the appropriate driver installed. I have looked into third party applications but none of them seem entirely trust worthy and some cost money, which I don't believe I should pay considering I bought a legit copy of FCP at great expense and Apple seems to have forgotten all about it now FCX has been out for a while.
Info:
Final Cut Studio (2009), OS X Mavericks (10.9.2)
how do I transfer video files shot from my camera (Canon 5DMk2) which is in .MOV format into iTunes ? My photos and video files are first imported into Aperture then synced with iTunes. However, itunes does not capture the Video files but uploads the phtos from Aperture during sync.
Info:Aperture 3, Mac OS X (10.7.3)
I have a really good working Canon laser shot LBP 1120 printer, but on the cd it has drivers only for Microsoft. Does anyone know will it work with my macbook and where to get the drivers?
View 2 Replies View RelatedHow do I import files from a Sony Z7 cf card into Final Cut Pro x.
View 1 Replies View RelatedIs it possible to import cinema dng raw files from a BMC Camera into FCP X?
I'm running Mac OS X 10.6.8 Snow Leopard and FCP X 10.0.9 ...
Just updated to 10.1.3 from 10.1.2 and video files import without audio into library. Audio shows and plays in media import window. Everything from before update is fine.
Info:
MacBook Pro, Mac OS X (10.6.8)
I tried doing several things such as flattening the images, changing the resolution, using different file formats. I tried making the images exactly 1920 by 1080 which someone mentioned was the px dimensions that imovie uses and that didn't work.
The only time the image seems clearer is when I go to show photo settings, which is weird.
These images were originally raws so I can make them whatever size is needed for imovie. I just need to know what it likes best!
I was thinking I might not be rendering them properly. I imported it into idvd and it rendered it that way. Is there another way I can do it maybe?
Failures to import movie clips from Sony AX100 4K camcorder into FCP10.1.1 or iMovie 10.0.3. Clips are not recognized or rejected by either program.
Same problem with several downloaded "XAVCHD to ProRes 4.2.2" conversion programs and Sony's "playmemories home" Seems to me that the file names are suspect to internal Mac firewalls?
My computer: iMac 27 late 2012, OS X 10.9.3, 3.4 GHz Intel Core 17, FCP10.1 and iMovie 10.0.3
How to get xavchd files straight or converted to ProRes 4.2.2 into FCP or converted to AICinto iMovie?
Info:
Final Cut Pro X, OS X Mavericks (10.9.3)
Since upgrading to Snow Leopard, I can no longer import P2 footage. I get the stop sign and error: no data.In the import window I can play the clip and everything is fine, but when I add to the clip to the import queue it just times out.
Any thoughts? Is it somehow related to Quicktime being updated by Snow Leopard?
Information:
Macbook Pro
Mac OS X (10.6.1)
Final Cut 5.1
I don't see "import from imovie" under file/import
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
I am going to get a new mac mini tomorow and i have a wonderful canon FS10.
Whenever I use it on my pc it is reading as .mov and i have heard from many that .mov is not read, and my cam is supossed to be reading as mpeg 2.
I have an Imac, with CS3. I use Iphoto to import my images straight from my canon 50D camera, which has been very easy for me to do. I've been importing jpegs up until now. Yesterday I attempted to import about 50 RAW images, but an error occurred and would not import them. So i suspect the error is because i am trying to import RAW images.
View 2 Replies View RelatedI realize that some movie formats on older digital cameras do not coincide with older versions of IPhoto. I have the original Iphoto/IMovie on my PowerBook G4 and neither will recognize the Canon Powershot S50 digital camera on the desktop--yet it shows up on IPhoto. I am still able to import all photos.
But what I am wondering is if there is a way that I can import video to the HD some other way? I cannot find the camera using finder despite having a USB connection. All I would like to do is download the small videos that I have on the camera's disk.
How do I speed up a movie import from a Canon GL2 to FCP X? Right now it just plays back at normal speed, and imports at the same rate.
Info:
Final Cut Pro X, Mac OS X (10.7.3)
How do you import video/pictures from the Canon vixia to the Mac (Mac OS X 10. 5. 8.)
Info:
iMac, Mac OS X (10.5.8)
How do I get the movies from my camcorder (Canon VIXIA HF R500) to import into iMovie?
Info:
MacBook Pro, Mac OS X (10.6.8)
i have a mac book pro 13", final cut software and a canon xa10 camcorder. i need to transfer video files from a camera to fail cut. how do i do it?
Info:
MacBook Pro with Retina display
I have my firewire connected to my camera but I am not sure what to click in order to import my videos. I know nothing about technical terms and stuff so I used Imovie but i don't have that anymore. How do I do this on FCP?
View 2 Replies View RelatedI recently made some software updates to FCP X and now I can not import any media into FCP X. Does this sound common?
View 5 Replies View RelatedI have a Canon XL1s going into my MacBook Pro running Final Cut X via DV to FireWire 800 to thunderbolt. Since I am recording long meetings I skip recording to tape and record straight to the hard drive. I have done this in the past and it worked on older versions of the same hardware and software.
It will import only when the camera is also recording.Now When you import, you can see the feed and the computer says its importing, but after you stop importing the files are nowhere to be found. I even tried this on IMovie and used someone else's Mac with the same result.
Info:
Final Cut Pro X, OS X Yosemite (10.10.1)
Well, till the upgrade to FCPX 10.1.3 i have problems with importing footage from my Sony VG30 ( .MTS AVCHD files). From the past, i just copy the file from the SD card on the computer and then import it in FCPX. When i do that, i can't import it, but there are audio bugs (parasite sounds).From the past, that method also work on FCPX 10.1.1 but now i'm on 10.1.3 i can't see the content of the SDCard, arriving to AVCHD folder, FCPX will no more import or recogniste it as video media.
Info:
iMac, OS X Yosemite (10.10)
Just updated to 10.1.2. My typical workflow is as follows:
1. Copy AVCHD folder (with all files and file structure) from a SD Card to ext HD
2. Import AVCHD folder (with all files and file structure) from ext HD to FCX
But all of a sudden, when I look to import new footage that I just copied to my ext HD, I no longer have an option to import an entire AVCHD folder (with the file in it). FCX doesn't even show the AVCHD folders on my ext HD.
HOWEVER - When I copy a newly created AVCHD file to my desktop, FCX sees those files (though I don't have the option to import and entire folder filled with the AVCHD files).
I have an entire ext HD full of archived AVCHD folders from SD cards. I thought this was a good way to have back up files (I also have these AVCHD folders on another back up cloud drive), but now it looks like I can't even access them with the new FCX update.
An issue arose today with our new MacPro/FCPX/SNS EVO SAN combo.
When importing media from a portable drive using FCPX in “copy files” mode, with the Library’s media folder residing on the SAN, FCPX imports but does not copy the media. The clip appearing in the browser is still linked to the original file.
If the clip is of a codec that can be optimized and the option in the import window is ticked, only the optimized media is copied to the SAN volume.
Renders work, writing to a dedicated NAS volume, Exports work too, writing to another dedicated Exports NAS volume.
I am stumped. I have never seen FCPX behave this way. The strange thing is that at no time does it indicate any problem with the copying process not succeeding…
Because the optimized media is created on the volume I would imagine this is probably more of an OS/FCPX issue but I don’t know enough about the processes in the mac to be sure of that.
OBTW: Trashed the prefs, with both Pref Manager and alt+cmd at launch.
Info:
Mac Pro, OS X Mavericks (10.9.4), 64 GB RAM Dual 700s gfx cards
I don't do a lot with Mini DV, but I have a mini dv tape that I'm attempting to capture using FCP7. Basically when I play the video to a TV off the camcorder, it looks fine, and when I play it in the "log and capture" preview window it looks fine, but when I actually capture it, the video is very pixelated/chunky. What am I doing wrong here? I notice that in the "log and capture" preview window, there are interlacing/combing lines, and when I play the captured clip, there are not. Can FCP7 be trying to deinterlace my footage and butchering it in the process? I'd rather have combing than this pixelated mess.
You can see a comparison in the screenshot here, especially noticeable in this comparison along the roof lines: [URL] ...
I upgraded to 10.1 and have been working with Libraries for a while now however there are some projects I decided not to move into the new version. Now I need to open then and the project folders are not recognised when trying to import?
Here you can see that the Final Cut Projects folder cannot be selected?
Info:
Mac Pro, Mac OS X (10.5.8)
My Canon 70d took a sample video set 1080p 60 fps (59.97) (ALL-I). I then imported to a project (FCP set up for 1080p) but when bringing the clip into the timeline and selecting it then looking at "info" it states 720. Why is this? And will this still export to full 1080p?
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
Whenever I import a 720x480 mp4 file to Final Cut Express I have to render it. And whenever I add an effect to a clip I have to render again. Is there a way to stop this?
View 1 Replies View RelatedCannot connect to external drive from Final Cut X import window; cannot create new project. I have tried repairing drives and permissions. I have a MacBook Pro, 2.7 GHz, Core 17, with OS X 10.9.3 (13D65). Everything is recently updated.
View 5 Replies View RelatedI don't do much with tape anymore but a client has provided me with some HDV tape that i want to edit as ProRes in Premiere Pro.
I don't have a third party capture card so therefore in Premiere Pro I am limited to capturing only as HDV from tape.
I'm thinking of capturing as ProRes in FCP 7 (which I had done for ages before switching to Premiere in the wake of FCP X) and then importing the subsequent ProRes files into Premiere from the capture folder.
