My Canon 70d took a sample video set 1080p 60 fps (59.97) (ALL-I). I then imported to a project (FCP set up for 1080p) but when bringing the clip into the timeline and selecting it then looking at "info" it states 720. Why is this? And will this still export to full 1080p?
Info:
Final Cut Pro X, OS X Mavericks (10.9.5)
As you've probably already gathered, the 1080p piece of info doesn't show up in the side info bar on movie pages. This can be seen here:Also, I have set 1080p in preferences: This is for the movie "Hugo", by the way. I use it as an example, as I've seen it say 1080p in part the following video:
[URL]
Info:
MacBook Pro, Mac OS X (10.7.3)
Since upgrading to Snow Leopard, I can no longer import P2 footage. I get the stop sign and error: no data.In the import window I can play the clip and everything is fine, but when I add to the clip to the import queue it just times out.
Any thoughts? Is it somehow related to Quicktime being updated by Snow Leopard?
Information:
Macbook Pro
Mac OS X (10.6.1)
Final Cut 5.1
I don't see "import from imovie" under file/import
Info:
MacBook Air (13-inch Mid 2013), OS X Mavericks (10.9.3)
I'd love to see Final Cut Express get an update since it hasn't been updated since 2007! It does support up to 1080i HD widescreen, but 1080p is not supported. This is frustrating as iMovie is a consumer product and I prefer the look of Final Cut.
I know I could just purchase Final Cut Studio and get Final Cut Pro, and have 1080p support, but I don't want to spend that much money. Final Cut Express was perfect in that it had the look of Final Cut Pro! I wish Apple would release an update, but I haven't heard anything.
I have successfully burned 2 DVD's & 1 Blu Ray from the same file so the media files don't seem to be the problem, I have fully uninstalled/reinstalled Final Cut including all caches/preferences etc as instructed on the official instruction page, All three file destinations (USB, EX HD, iMac HD) have more than enough space for the 8 GB file. It's also not just "Apple Devices 1080p" but all computer/hard drive based destinations (Apple Devices 720, Master, Export File, etc)
Info:
iMac, OS X Mavericks (10.9.4)
extract plist-I want to save my emails and attachments from Applemail;
and use the information in Thunderbird mail and Address book.
how do I extract the plist from those libraries and reuse.
I cannot import or export the info?
Am switching from my Palm Treo to an iPhone. Trying to import my contacts and calendar. Was told I could import the Palm info to Entourage, and then have the new phone sync with Entourage. I have both Entourage and Palm Desktop on my Mac. When I follow the import prompts with Entourage I get the following:
What would you like to do?
-Import information from a program
Which program would you like to import information from?
-Palm Desktop
What would you like to import?
-Contacts
-Calendar
Then I get an "Open" window... what am I supposed to double-click here? I don't see any highlighted Palm program in the Applications folder.
According to Finder, my hard drive has 83.69GB available.According to iStat, my hard drive has 77.94GB available.With the 7GB freed up from installing Snow Leopard, iStat seems like the one that should be correct, seeing as how I had ~68GB or free with Leopard.Which one should I trust, and why is there a discrepancy?
View 4 Replies View RelatedI have my firewire connected to my camera but I am not sure what to click in order to import my videos. I know nothing about technical terms and stuff so I used Imovie but i don't have that anymore. How do I do this on FCP?
View 2 Replies View RelatedI recently made some software updates to FCP X and now I can not import any media into FCP X. Does this sound common?
View 5 Replies View RelatedOur internet provider just changed their email system from the Google partner program to something else. I made new accounts using the info that they provided and everything works well. It's just that my login information for the email account didn't automatically get entered into Keychain Access and I was wondering why. I have OS X 10.10 yosemite .
Info:
MacBook Pro, OS X Yosemite (10.10), 17 in, 4GB
I have a Canon XL1s going into my MacBook Pro running Final Cut X via DV to FireWire 800 to thunderbolt. Since I am recording long meetings I skip recording to tape and record straight to the hard drive. I have done this in the past and it worked on older versions of the same hardware and software.
It will import only when the camera is also recording.Now When you import, you can see the feed and the computer says its importing, but after you stop importing the files are nowhere to be found. I even tried this on IMovie and used someone else's Mac with the same result.
Info:
Final Cut Pro X, OS X Yosemite (10.10.1)
Well, till the upgrade to FCPX 10.1.3 i have problems with importing footage from my Sony VG30 ( .MTS AVCHD files). From the past, i just copy the file from the SD card on the computer and then import it in FCPX. When i do that, i can't import it, but there are audio bugs (parasite sounds).From the past, that method also work on FCPX 10.1.1 but now i'm on 10.1.3 i can't see the content of the SDCard, arriving to AVCHD folder, FCPX will no more import or recogniste it as video media.
Info:
iMac, OS X Yosemite (10.10)
This has concerned me ever since I got a Mac. Sometimes I'll open mail, and it'll say (in the bottom left ) receiving 1 of 15. Scroll across to 15 - but I'll actually only get one new email. I have Junk Mail filtering to just mark emails, not delete them.
View 4 Replies View RelatedJust updated to 10.1.2. My typical workflow is as follows:
1. Copy AVCHD folder (with all files and file structure) from a SD Card to ext HD
2. Import AVCHD folder (with all files and file structure) from ext HD to FCX
But all of a sudden, when I look to import new footage that I just copied to my ext HD, I no longer have an option to import an entire AVCHD folder (with the file in it). FCX doesn't even show the AVCHD folders on my ext HD.
HOWEVER - When I copy a newly created AVCHD file to my desktop, FCX sees those files (though I don't have the option to import and entire folder filled with the AVCHD files).
I have an entire ext HD full of archived AVCHD folders from SD cards. I thought this was a good way to have back up files (I also have these AVCHD folders on another back up cloud drive), but now it looks like I can't even access them with the new FCX update.
How do I import files from a Sony Z7 cf card into Final Cut Pro x.
View 1 Replies View RelatedIs it possible to import cinema dng raw files from a BMC Camera into FCP X?
I'm running Mac OS X 10.6.8 Snow Leopard and FCP X 10.0.9 ...
An issue arose today with our new MacPro/FCPX/SNS EVO SAN combo.
When importing media from a portable drive using FCPX in “copy files” mode, with the Library’s media folder residing on the SAN, FCPX imports but does not copy the media. The clip appearing in the browser is still linked to the original file.
If the clip is of a codec that can be optimized and the option in the import window is ticked, only the optimized media is copied to the SAN volume.
Renders work, writing to a dedicated NAS volume, Exports work too, writing to another dedicated Exports NAS volume.
I am stumped. I have never seen FCPX behave this way. The strange thing is that at no time does it indicate any problem with the copying process not succeeding…
Because the optimized media is created on the volume I would imagine this is probably more of an OS/FCPX issue but I don’t know enough about the processes in the mac to be sure of that.
OBTW: Trashed the prefs, with both Pref Manager and alt+cmd at launch.
Info:
Mac Pro, OS X Mavericks (10.9.4), 64 GB RAM Dual 700s gfx cards
I don't do a lot with Mini DV, but I have a mini dv tape that I'm attempting to capture using FCP7. Basically when I play the video to a TV off the camcorder, it looks fine, and when I play it in the "log and capture" preview window it looks fine, but when I actually capture it, the video is very pixelated/chunky. What am I doing wrong here? I notice that in the "log and capture" preview window, there are interlacing/combing lines, and when I play the captured clip, there are not. Can FCP7 be trying to deinterlace my footage and butchering it in the process? I'd rather have combing than this pixelated mess.
You can see a comparison in the screenshot here, especially noticeable in this comparison along the roof lines: [URL] ...
I upgraded to 10.1 and have been working with Libraries for a while now however there are some projects I decided not to move into the new version. Now I need to open then and the project folders are not recognised when trying to import?
Here you can see that the Final Cut Projects folder cannot be selected?
Info:
Mac Pro, Mac OS X (10.5.8)
When I imported a new album that feature different guest artist singing with primary artist, the CD imports as a different album for each song. How do I prevent this?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.6.8)
Whenever I import a 720x480 mp4 file to Final Cut Express I have to render it. And whenever I add an effect to a clip I have to render again. Is there a way to stop this?
View 1 Replies View RelatedCannot connect to external drive from Final Cut X import window; cannot create new project. I have tried repairing drives and permissions. I have a MacBook Pro, 2.7 GHz, Core 17, with OS X 10.9.3 (13D65). Everything is recently updated.
View 5 Replies View RelatedI can't import MXF files shot on a Canon C300 into FCP 10.1.2. I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.
Info:
Mac Pro (Early 2008), OS X Mavericks (10.9.4)
Just updated to 10.1.3 from 10.1.2 and video files import without audio into library. Audio shows and plays in media import window. Everything from before update is fine.
Info:
MacBook Pro, Mac OS X (10.6.8)
I don't do much with tape anymore but a client has provided me with some HDV tape that i want to edit as ProRes in Premiere Pro.
I don't have a third party capture card so therefore in Premiere Pro I am limited to capturing only as HDV from tape.
I'm thinking of capturing as ProRes in FCP 7 (which I had done for ages before switching to Premiere in the wake of FCP X) and then importing the subsequent ProRes files into Premiere from the capture folder.
It's easy to select part of an AVCHD clip to import but I still can't import a range from a .mov file on my HDD.
Is it impossible or am I just doing it incorrectly?
Info:
iMac, OS X Mavericks (10.9)
Select Shuffle Mode. Pause your music, or make sure nothing is playing, then go to Minimize view.
Now hit FFW or REV. What appears in the track info box? Nothing, right? iTunes doesn't show you what song it has shuffled to. It only works if you are playing, not in pause.
Surely this is wrong? Sometimes you want to select song before playing it, right? This works fine on my Ipod. Everyone else have this problem?
I tried to import a .mod converted (in Streamclip) .dv file into iMovie 6 but
received the following error:
The file could not be imported: The file �Macintosh HD/Users/alix/Movies/MOV03A.dv� can�t be imported; QuickTime couldn�t parse it: -39
