When I start FCP it loads all my projects, then it says 'Restoring the Layouts' and stops. I can access the menubar but if I try to do anything, a mutated layout appears and all is bad. I have tried removing the layouts folder from the finder library, but it doesn't seem to work...
Info:
Mac OS X (10.7.3)
My FCP X stalls on opening either after selecting a Library or without any library selected. I did create a new library called test but still no go. FCP X does not get past restoring window layout. The stalling did take place after a frustrating day copy ing and relinking files.
View 2 Replies View RelatedThe software crashed and after I started it again there was a mess of files which are not found although I downlaoded them from the camera.
Now the software doesn't show anything. Only gray screen and it is stuck on "restoring window layout"
Info:
MacBook Pro, OS X Mavericks (10.9.3)
I'm trying to install Final Cut Studio (6.0.1) on a C2D MBP running Snow Leopard (10.6).
This is my third attempt, after restarting and then shutting down and resetting PRAM, and the install keeps getting hung up on "Running package scripts..."
Installer is responsive, it's just getting stuck for some reason.
Anyone else having this issue?
What to do fcp x dosent open. It sticks on restoring window layout page...
View 9 Replies View RelatedI currently use a Logictech keyboard with my MB Pro, and it is fine. The only issues are that it is big. I do like the somewhat ergonomic key layout. I am, however, interested in finding a keyboard that has both a numeric keypad (disqualifies the Apple wireless) and that can turn on my MB Pro without my having to open the computer and hit the button. I know, a stupid thing, but I like it. Does the Apple Wired keyboard have the on/off ability? Anyone use the RocketFish keyboard? Has a keypad.
View 1 Replies View RelatedI just bought and installed snow leopard and when i did i restored to factory settings so i could start fresh. However i wanted to restore my itunes back to how it was, but i can seem to work it out. If someone could tell me an easy way to do
View 1 Replies View RelatedI have a much loved ibook G4 14" (late 2004??). It has just died. Well, in so much as it won't boot up. The ibook either gets as far as the apple grey screen and hangs, gets to the login screen and hangs, actually loads up finder etc and hangs or none of the above. Sometimes flashing red, blue green black.
After lots of research online over the past few days I tried the following: I have tried safe mode (not working), starting the command prompt screen (single user and verbose modes), started open firmware, and tried booting from a CD. Nothing works as the boot gets so far then hangs. I have flashed the PRam, resetted the NVRam, and have stopped short of opening up the case to dismantle it!
I just really want to access the hard drive now. I have tried Target disk mode and linked the ibook (pressing T) via firewire to a PowerPC G5, but the G5 doesn't recognise the ibook. System profiler on the G5 shows the target mode connected and working fine via firewire, just the icon for the ibook/target doesnt mount on the G5 desktop so I cant access it.Currently the boot freezes within a couple of minutes.I tried the hardware test CD that came with the ibook years ago, I have also tried booting from an OSX Panther CD. I'm assuming they would be bootable.
I forgot to mention that in linking with the G5 in target mode, a disk that I put in the ibook drive appeared on the G5 desktop as an external drive, therefore I wonder why i cannot see the actual ibook drive mounted. The CD drive works as it mounted on the G5.Does the ibook have an actual PRam battery that can be replaced? Maybe this is an issue?Am I able to actually remove the hard-drive and access it as an external drive somehow?
I am using Stata, a statistical analysis program. Recently, when I try to open a file, using File Open, the program hangs and I have to force it to quit. I can open files easily if I use Recent files. When the file gets open, I can do everything I should be able to do with the program. Analysis, graphics, etc. It is JUST when I do File Open that it hangs, and it seems to be ONLY with Stata.
Info:
Mac mini, Mac OS X (10.7.2)
Will LiveType work on Mavericks?
Will Final Cut Express work on Mavericks?
I am experiencing problems with the installation process for the Mac OS X 10.5.6 update. Although Software Update presents the appropriate update file, I am experiencing hangs resulting in the update never completing.
View 2 Replies View RelatedNot sure whats changed, but now when I plug in my external drives. Spotlight (mds) spins for a good while then eventually hangs. I can't figure out what the problem is.
View 3 Replies View RelatedI have a 2009 8-core running Lion. It has now starting hanging (desktop visible but no response to any input device). I have run Disk Utility and Apple Hardware Test from install DVD (full test) and it finds no issues. Any thoughts as to how to investigate further. Sounds like a memory leak in an app somewhere, but none are left runnIng.Machine is ok when being used but then is hung when left for a few hours. If I take to Genius Bar I assume they will run AHT and say no faults can be found.
Info:
Mac Pro, Mac OS X (10.7.1)
I have a MacBook Pro 2.16 C2D that I just updated with Leopard. I noticed that occasionally the computer will hang when I attempt a shutdown. I didn't have this problem with Tiger so I assume it's a bug in Leopard. When I try a normal shutdown all I see is my desktop wallpaper and that little circular animated icon. I have to hold in the power button to force a shutdown.
View 24 Replies View RelatedEarly in the upgrade progress bar, where it says: "Configuring Installation", with less than 3 or 4mm of progress on the progress bar (18" screen, 1280x1024), it just hangs. It sits there and does nothing more. Both on my PowerMac G5 and my brand new Mac mini. If I wait for forever, and then power down, and restart, it starts right back up in to 10.5.5, and software update will tell me it wants to install 10.5.6.
View 7 Replies View RelatedI have a iMac(20") for about a year now and its ran great up untill now. It is hanging on boot. Sometimes its the white screen with apple logo and spinning gear, other times the screen goes blue and i can see it load a mouse cursor for about 2 seconds, then the screen goes through a few shades of blue and the spinning gear re-apears with no apple logo. The computer then loops. I tried to boot to safe mode, but as i have the sound off i am not sure i am holding the shift key at teh proper moment. If anyone has any advice, please, please let me know. my mac reinstall cd is about 8hrs drive from where i am, and i do not know if mac issues replacement cd's.
View 1 Replies View RelatedI've got my MBP running the iTunes cover art as the screen saver, and to lock the computer when it goes into the screen saver. Every once and awhile, it'll hang when I try to bring it out of the screen saver to put my password in. The screensaver will be playing, then I wiggle the mouse, and the screen goes black, as it does normally followed by the username/password box.
But that box never shows up, just the cursor and a black screen. It's not every single time either, kinda intermittent. I've had to do a hard power down to get out of it, unfortunately. This doesn't cause any file corruption, does it? Anyway I've now set my firewall to allow incoming SSH connections only from my user, so that at least I can SSH into it from my iPod Touch, should it happen again.
I was downloading a couple of software upgrades onto my Mini -- the latest version of Safari and a security app of some sort -- when I suddenly lost power. On getting the electricity flowing again, I retstarted the Mini, but it's hung on the opening gray Apple display -- the spinny thing just keeps on spinning, and I get the feeling it's not going to stop. Did the power outage in mid-upgrade screw my Mini beyond all un-screwing? Should I try putting it in Target mode and running Disk Utility on it from my iBook? What should I do?
View 5 Replies View RelatedMacBook hangs on certain websites (yahoo mail, cbs sports, mens fraternity) but only from one of my wireless networks. PC works flawlessly on this situation and macbook works flawlessly on my first wireless router so the problem is tied to the interaction between my Macbook and the second wireless router. I've searched the forums and tried many fixes already that have been posted here or elsewhere: Reset Safari (it then allows me to reach yahoo mail once, hangs on every try thereafter). Go to Safari preferences and uncheck the box for warning of fraudulent sites (no change) Go to advanced settings and input DNS numbers from my ISP (this solved the problem for some websites but not others) try firefox (same problem as safari) software update everything (no help) install onyx (about to do that). network is a DSL modem connected to the first wireless router (DLINK N+). Second wireless router is linksys G (the problem child) and it is hardwire connected to first wireless router.
View 13 Replies View RelatedI recently bought a used Macbook Pro (A1212). I received it with no battery (on the way), and a dead harddrive (booted to folder question mark). I replaced the hard drive with a new one and tried booting up the DVD. When pressing option during startup, I'm given the option to boot the dvd. I click on it and I can hear the DVD whirr for a couple minutes, apple logo shows up, then a loading circle on the bottom of it, eventually the logo turns into a Deny Circle. What could this mean? The DVD is in tip top condition.
View 4 Replies View RelatedI seem to have a problem with safari, it mainly hangs on launch where I usually have to wait 5 minutes for it to recover, this is the log i get:
Mar 29 13:53:33 Lynnerup Safari[202]: QUERY-HANG-DETECTED - time: 3.182763, DB size: 181256192
Mar 29 13:53:35 Lynnerup Safari[202]: INSERT-HANG-DETECTED: Tx time:3.319087, # of Inserts: 1, # of bytes written: 24392, Did shrink: NO
Mar 29 13:53:54 Lynnerup Safari[202]: INSERT-HANG-DETECTED: Tx time:12.832515, # of Inserts: 24, # of bytes written: 747312, Did shrink: NO
Mar 29 13:54:19 Lynnerup login[214]: USER_PROCESS: 214 ttys000
Mar 29 13:57:43 Lynnerup com.apple.WebKit.PluginAgent[249]: Debugger() was called!
Mar 29 13:59:57 Lynnerup com.apple.WebKit.PluginAgent[249]: Debugger() was called!
the debugger was called entering here. I also seem to get hangs whenever i'm maxing my system, safari typing what I wrote in say google up to 5 minutes after I wrote it...
This is my first week on Mac. Periodically the screen flickers & hangs for a while after that it's back to normal.
View 10 Replies View RelatedI have emptied Library/Cache.I have deleted Library/Preferences plist/update.I emptied Trash after both steps and then restarted. Still nothing
Info:Mac OS X (10.5.1)
I acquired a new Macbook Pro laptop using 10.7.3. I have tried to use the Migration Assitant multiple times and it stops at 2 hours 7 minutes to go. Nothing ever seems to transfer. I ran disk first aid and fixed a number of permission issues. Still it hangs up. Tried to transfer files only and it seemed to run, but no files transferred.I would like to download IDVD, Aperture, Word, Excell and Powerpoint but there seems to be no way to get files to transfer?
Info:
Aperture 3, Mac OS X (10.7.3)
All my late 2011 Core i7 MacBook Pro hangs up at the grey screen when i try to shut it down or restart it mostly it gets stuck on restart...
Info:MacBookPro, Mac OS X (10.7.3), Core i7 Thunderbolt
My 2010 Mac Mini shows grey screen with progress bar on startup and after some time I get multi language restart notification. I reboot and etry and it seems to work but once it goes to sleep there is n waking up.
Info:
Mac mini, Mac OS X (10.7.3)
I installed OS 10.7.4 update. Ater that the finder, safari or any program except for Google Chrome.Before that everything was working perfect.
Info:
MacBook
Pro, Mac OS X (10.7)
When I shutdown my iMac, then will loading the grey screen.Sometimes, it can shutdown normally, but once I turned on the iMac over than 3 hours.It will hang on the grey screen. I need to press the power button 10 seconds turn it off.I just installed winebottle and diablo recently and I deleted these softwares.but problem still here, I copy the log that I turned off a few minutes ago...Method selectedRowEnumerator in class TransparentTableView is deprecated. It will be removed in a future release and should no longer be used. [code]
Info:
iMac (21.5-inch Mid 2011), iOS 1.x
I have upgraded 4 macs (iMac 24"; MBP 17 and MBP 15 and iBook) for 10 days+. Now MBP 17 (4GB RAM) having serious issues with DOCK; Expose and Spaces.
- Dock hangs when I try to open Mail then disappears until I reboot.
- Expose and Spaces do not work -have had to swtich them off as they lose all their settings.
Reinstalled from scratch and everything was well for 3 days now back to same problems.
- Also in Dock preference setting. I cannot activate "Automatically Hide and Show". The setting will not activate at all.
- Command (Apple) + Tab = Application Switcher will not work!
So without the Dock, I have to go to Applications (in Finder) or Recent Items to launch apps! All 4 machines I upgrade are similar except for CPU, RAM and Hard-disk size. Running same apps (except for Aperature on MBP 17 on the culprit machine!)
Unexpected power loss while browsing with Safari V4.0Beta (unrelated problem) left me in a state where I can no longer run any version of Safari. I have already restored (via time machine)my entire Library twice with no effect. Other users on this iMac G5 can run Safari with no problem. This appears to be some form of intentional lock out... Somewhat like a parent lock, but parental controls are not being used. In addition, this is the only admin account (I'm the primary user) so I don't make a habit of telling myself I can't use an application. Bottom line: When I invoke Safari, the URL never changes and I am stuck with the spinning colorwheel and an empty white Safari screen.
View 1 Replies View Related
