Just upgraded to iTunes 9.0 and I'm running a clean install of Snow Leopard.
Every time I open up iTunes that stupid Firewall box asks if I want to allow/deny incoming connections.
Even if I allow, and verify it's in the list as allow, it asks everytime.
I've removed it from Firewall settings, no luck.
I've reinstalled iTunes, no luck.
In Snow Leopard, I'm noticing that I get a lot of these messages in Console now:
Quote:
Aug 29 09:49:07 MacPro Firewall[77]: Stealth Mode connection attempt to UDP 192.168.2.6:57065 from 68.87.73.242:53
That 68.87.73.242 address is my Comcast DNS server.
They show up as a Info type message in Console. No real problem, just curious if anyone else is seeing that.
just got my New iMac 27".
Just wondering why when I click on system prefs>security>firewall
it is turned off by default? Should I turn it on? If so why was it set on off when I turned on my imac for the first time?
I got an iPod Touch today and I'm while I was testing out some apps I noticed that I cannot connect to my MacBook Pro.
If I try to ping it I get no response. Going to the Mac's address in a browser (web sharing is on) I don't get any response either. I cannot connect to for file sharing either. I have turned off the firewall in OS X and rebooted the computer with no change. All sharing options are enabled. If I run "sudo ipfw list" I get this: "65535 allow ip from any to any".
It appears however that Snow Leopard allows connection from outside the local network, as Internet, BitTorrent, Mail etc. works as usual.
I've tried turning the firewall off in the router but connections are still blocked.
I want to stream music and photos from my Macpro running 10.6.8 to my AppleTV, however, it seemed like the only way I could get it to work was to turn off my Firewall. Is there a way to give my AppleTV access to my Mac without having to turn off the Firewall?
View 1 Replies View RelatedMy fios router only supports 64 bit wep encryption. Is my machine secure if I turn on firewall
Info:
iMac, Mac OS X (10.7.2)
I've just tried running the security test on the Shields Up! site, and I note that even though my firewall is in stealth mode (and Shields Up! reported that all the ports it probed were stealthed), it failed the test because it replied to an ICMP ping request - and yet the Snow Leopard firewall specifically states that when it's in stealth mode, it won't respond to such requests.
View 2 Replies View RelatedConsole log is packed with Info messages realted to connection attempts from AEBS router. Is that normal? also, system profiler states:
Info:
MacBook Pro, Mac OS X (10.6.7), assorted apple products
I boot up or log-n, itunes asks me to allow/block it from the mac firewall. No matter what I do, it asks every-time!
View 3 Replies View RelatedI am getting a Firewall message that reads:Â The service "(Common Internet File System (CIFS))" is starting on your Mac.
Application:Â sbin > launchd
Port:Â Â 445 (Common Internet File System (CIFS))Â
It also says: if you don't change firewall settings, the firewall wil block connections from other computers to this ervice on your Mac. Â
Info:
Mac Pro 2.8 GHz, Mac OS X (10.6.6), NVIDIA GeForce 8800 GT 512 MB, 10gigs Ram
So as I understand it, Snow Leopard is completely 64-bit meaning 32-bit apps will not run. How will Time warp/time capsule restore apps from 10.5 when you upgrade to a 10.6 machine?
View 7 Replies View RelatedHow do you restore your itunes music folder from time machine back-up to an external portable hard drive?
Info:
MacBook Air, Mac OS X (10.6.8)
Installed Snow Leopard about a month ago and QT worked fine....now when I double click it won't open.
View 2 Replies View RelatedI really love DockArt but does it work in Snow Leopard? Anyone tried it?
http://www.tuaw.com/2007/03/16/docka...-to-album-art/
I just did a clean install of Snow Leopard on my older macbook. I did not specifically back up my itunes purchases, however, I did do several Time Machine back ups as well as manually moving data via Finder (copy "Macintosh HD" and paste to folder on external), and finally a clone using CarbonCopyCloner. I wanted to start fresh, but I failed to think of my iTunes purchases, as well as iPhone app purchases/downloads. Is there some way I can specifically restore iTunes from the back up without having to restore from a TimeMachine backup?
View 2 Replies View RelatedLast night I got rid of Leopard on all 3 of my macs and did a clean install of Snow Leopard.
Among the little problems I`m having at the moment (even after upgrading to 10.6.4) this is a big one I haven`t been able to find a solution for :
I used Software Update to update everything and after the installation I realized the new iTunes isn`t working.
I recently installed Snow Leopard. It works faster than before and it gave me 8GB of space back. But, after looking through Applications in system profiler, I found out iTunes is not 64-bit unlike Safari and other native applications that have been re-written to 64-bit. I remember Apple said iTunes is also re-written. I must download a new version or it's included in an update (I'm waiting the 10.6.2 update to download at the moment)?
View 9 Replies View RelatedCan anyone tell me where iTunes is storing all my MP3 music and playlists information? Usually, I find it under users/music/itunes/itunes media
Well, just went there and nothing is listed inside the iTunes folder.
Is there some sort of protection in place preventing me from accessing all my stored MP3s and playlists?
I plan to 'clean up' my Time Machine/Time capsule completely, whereby I want to make it impossible for third parties to recover all or part of these old backups.After I have accompished this I want to start from scratch backing up my Mac.
Info:
iMac 27" i7, Mac OS X (10.6.6)
I tried playing command and conquer: tiberium wars on windows. I have never had an issue playing with my old router but have recently upgraded to the Time Capsule and I could not connect when I was playing online. I could connect initially but when I would go into a game it just would not allow me to connect to start the game. I then plugged directly into my cable modem and was able to connect right away. Do I need to go into Time capsule and adjust a setting?
View 2 Replies View RelatedI cannot seem to set up Time Machine using Time Capsule on my MacBook Pro. Evidently when I initially set up AirPort Extreme, I failed to select it as the backup disc.
Info:AirPort Extreme 802.11n (4th Gen), Mac OS X (10.6.8)
Where is the location of the firewall log in Leopard?
When I click on Security> Firewall>Advanced> Open Log nothing happens.
I can't access the internet since I can only connect to a private address starting with 169.254.xxx.xxx
I'm thinking some firewall issue has suddenly made not able to use DHCP to access the internet.
When I start tunes it always asks me if I want to allow incoming access.When I try and synch to Apple TV it tells me I ned to open port 3689.There are many posts on support forums about these issue with previous OS releases
View 6 Replies View RelatedI hope I'm just missing something, but it seems the Leopard firewall took a huge step backward from Tiger. I want to configure it to permit certain ports to connect, and it seems I can't do that basic thing. All I see is a way to tell it which apps should be allowed to receive external connections. That's quite unsatisfactory to me; is there a way to just open up ports?
View 2 Replies View RelatedI have a problem with firewall under 10.6.5 under both of my macs (MBPRo and MacMini). The system firewall forgets the settings that allow connetction for iTunes, World of Warcraft Launcher, Blizzard Downloader, DropBox app. I have to mention that settings are set for this apps in system preferences / firewall.
View 2 Replies View RelatedCan someone help me figure out why every time I launch iPhoto, the Leopard firewall prompts me to choose whether or not I want to allow or deny access for this application to accept incoming network connections...regardless of the fact that every single time, I choose 'Allow'? Here's a screenshot of the exact prompt that appears:
I've checked the Leopard firewall configuration in the 'Security' preference pane (which is obviously configured to "Set Access for Specific Services and Applications", and sure enough, iPhoto appears in the list with the 'Allow Incoming Connections' setting chosen....but it still asks me every time if I want to allow or deny connections, and I can't figure out how to make it stop asking??
I have a PMG5 with Leopard 10.5.6 on it. I did have it sharing with the PCs on my home network via SMB. Lately, however, it has stopped and XP kept giving errors saying that could not connect to the Mac . I tried every fix and checked every setting I could find on the net, then, on a whim, set the firewall to allow all incoming network connections (essentially turning it off). Wallah! Suddenly the Mac and the PCs were friends again. The firewall is set to allow File Sharing to go through but it isn't doing it. It will only share when it is off. What do I need to do to solve this issue?
View 1 Replies View RelatedI'm currently using a MBP 13 inch and am running Leopard on it.
I just bought a copy of snow leopard today but i don't know if I should do a direct upgrade from leopard to snow leopard, or wipe my MBP and do a fresh install so i have snow leopard on a clean slate.
Have any of you tried the second option before? Or do any of you have advice on which path I should take?
Im not sure why but when i first turn on my macbook a very fast pop up comes on and goes away. It has been happening ever since i turned my firewall on last week after realizing it was somehow off.
i have tried to take a picture and video to read the pop up but it fashes so fast i can read it. it looks like a allow/deny request. I was not able to find out what it was online.
I have my firewall set to "allow specific services and applications."
I noticed today that DashboardClient, System Preferences, and a program called "ScreenSaverEngine." Are all set to allow..
Typically i'd just want itunes so I can use simplify media, and safari/firefox because i think it has to be enabled.
What are the parameters for allowing a program incoming access in general - i seem to get asked it now that I have this option checked and wanted to make sure? I find it odd that i have some system utilities on my list set to allow - is it just me?
