I've got a 20" external Dell LCD monitor running off of a new White Macbook. When in Mac OS, the display works perfectly. However, when rebooting in windows XP all I see is the OS loading screen before the display goes black and nothing ever shows up. I've got the monitor connected via mini-DVI to DVI connector.
View 1 RepliesI have got my new uMBP i7. It is gorgeous, super happy with it . Because I need to run several programs under Windows XP, I have installed Windows XP under Bootcamp. I used Winclone to migrate bootcamp partition from my old MBP to the i7.My problem is that when I linked my external monitor (20 inch ViewSonic) to uMBP using the Minidisplay-to-DIV adaptor from Apple, there is no display on my external monitor. I can set the external monitor as extension of main monitor under "Setting", but after the windows Ding/Done sound, there is nothing on my external monitor. Does anyone have experiences about fixing this problem?
View 1 Replies View RelatedI use a Belkin AV360 so I can play my Xbox 360 on my new 27" iMac using target display mode. it has been working flawlessly since I got the AV360 until today where I haven't been able to get target display mode to work.
I've checked it is not the Xbox 360 being the problem tested it on my housemates TV. am also pretty sure it's not the Belkin AV360 itself because in system profiler under USB devices it says the "AV360 miniDP Converter" is pluged in and say same in Windows 7 bootcamp under device manager. I also tried my laptop which has a HDMI out on it.
my laptop says there is a "Belkin dongle" plugged in, I set the laptop to use the Belkin dongle at a external display and still I can't get target display mode to work.
Normally when I turn my Xbox on it automatically goes into target display mode or I can press cmd + F2 so to switch between iMac and Xbox. I have also tested my housemates Xbox in my setup and still the same problem.
I recently replaced the video card on my G4 and now the USB ports on the back of my apple studio display are no longer functioning, but the monitor itself is functioning just fine. The USB ports on the tower are functioning normally.
2002 Quicksilver 933mhz G4
1.5gb RAM
17" Apple Studio Display via ADC connection
(New card) ATI Radeon Pro 9000 64mb AGP ADC/DVI
I've bought new Thunderbold 27' display and connected it as a second screen to my iMac. Video works fine but I've just discovered that all ports of that display are not functioning, i.e. USB ports are not working, and I can't see its camera and speakers from my iMac. Is it possible somehow to get it working? Especially USB would be very wonderful.
Info:
iMac (27-inch Mid 2011), Mac OS X (10.7.3)
Has any one had any problems using an external display (Apple 24 inch LED is what I am using) with Bootcamp with an Apple laptop (recent MBP) in the closed lid position. I start Bootcamp & Windows, close the lid, but the display/computer won't restart once I plug in the peripherals.
View 2 Replies View RelatedI've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
View 1 Replies View RelatedThe homepage of www.colbath.ch has strange glitch in the hyperlinks to the sites pages. Despite recreating the page from scratch, the problem reoccurs. The problem is this: only the first letter of the hyperlinked word functions as a link. This fault occurs on the homepage only.
I would be grateful to anyone who took the time to visit the site and could give me a boost fixing the problem.
My external display (HP w2207) seems to conflict with my MacBook Pro (15 inch Retina display, early 2013) since I upgraded MacBook OS to 10.9.4.The external display works at initial boot of Mac but does not work after OS sleeps and I attempt to awaken, and while the external display is not waking, the Retina display flashes through different screen views, which only partially reflect my normal screen, or do not reflect my normal screen at all.Â
Info:
OS X Mavericks (10.9.4)
I have a new 27" iMac retina display. Is there any way to use it as an external display (since it does not support Target Display Mode)?
Info:
iMac with Retina 5K display, OS X Yosemite 10.10.1
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedJust wondering if anyone could help me figure this out.
I have my 40" flat screen plugged into my imac via VGA cable to mirror the image.
I'm just trying to have the imac display sleep while I play a movie full screen through the external TV.
I've tried two different ways but both have failed.
1-I set up a hot corner in the imac to sleep display but this results in both the display and the TV sleeping.
2-I just set the power settings to sleep after 1 minute. This works but then If a movie is playing the computer won't go to sleep.
I have a Macbook Air, and i just picked up the new LED ACD from my local apple store. Since im new to mac, is there a way to either close my Air and not have it go to sleep? I want to use the external display as the primary display with my laptop closed, any ideas?
View 4 Replies View RelatedI am about to buy a new 24" iMac. I currently have a Dell 2408WFP 1920*1200 display which I would like to use as a second display for the iMac.
Which Mini Dislpayport to DVI adapter do I need? Single-Link or Dual-Link?
I have a question about using dual displays with my new macbook. The basic issue is this:
1: plug in second display and setup dual monitor support to use the external hi-res display and the macbook's display (no problem here).
2: drag windows to the external display and resize to use (no problems here either).
3. Power down and disconnect the external display.
4. Start up the macbook without the external display and try and open up a program that I was using previously on the external display. The problem is that it is resized and positioned for the external display and is now off the screen of my macbook display and I can't directly get to the title bar to move it or the resize corner to resize it.
I just purchased a 23" monitor to replace my iMacs 17" display (since it has a nasty crack in one of the corners). I hooked it up fine and all, but the displays are linked, allowing me to hover the mouse to the iMac's display which I find annoying most of the time.
Is there a way to make the iMac display zone out and just use the external by itself?
I'm interested in the new iMac but could not work with a glossy display. Can anyone share their experiences of using the iMac with an external display? In one respect it seems like a waste to have two monitors but the base model costs little more than the maxed out Mini and seems like the better option.
I would be interested in seeing photos of any setups featuring the iMac and an external display.
Also, is there a way to turn off the iMac display when using an external display?
While using Google Sketchup and several other prgrams concurrently my macbook air cpu heats up substantiall. I like keeping the air "open" to allow for maximum heat disipation but of course this keeps the air screen on while I only want to use my external monitor. Is the only way to turn of the air screen turning down the brightness and using the "Mirror Display" option or is there another setting which alows my to utilize only the external display while the screen is open on the air?
Info:
MacBook Air, Mac OS X (10.7.4)
I have a Macbook Pro 2.16 Core Duo, and I'm wanting to install 10.6, but about a year ago, I cracked my screen to the point that I cannot make anything out on it, and haven't replaced it. Instead, I have just been using it in clamshell mode, which has worked out fine so far. My problem is that I cannot get the 10.6 install to show up on my external monitor.
I searched around, and could only find one other similar thread that just ended with the author putting it in clamshell and having it work fine. When I boot to the install and close the screen, I just get a grey box on my external display with a black bar on either side of it. I can't seem to find any other resources, so I'm not entirely sure what to do at this point. Any help would be greatly appreciated.
i'm hoping someone can help me out on this little problemmy usual set up is a pair of speakers connected with jacks via an m-audio usb audio interface, with an external monitor connected via mini-dvi to dvi.now for some reason my audio interface has randomly broken (on a side note, could a power cut have somehow broken a usb peripheral connected to my macbook whilst it was asleep?) so i've hooked up my speakers to the line out to rca. Now for some reason, when i plug the mini dvi connector into my macbook i get an incredible amount of hum. not just a little, alot!
View 1 Replies View RelatedI've noticed the display on my MBA is much brighter when I am running in Windows XP SP3 bootcamp. Big difference with OS X. Did anyone notice the same? Why could this be? I've tried checking settings, calibration and performance seem to be right.
View 9 Replies View RelatedGot myself a 27" iMac i7 which was delivered today.
Been playing with it all day in OSX and initially installed Win7 but I the display driver keep crashing and I was getting artifacts on screen then the message saying that it had recovered successfully.
Having read that Win7 was not fully supported I assumed that this was the problem so installed Vista, but got the same problem.
Screen stalled, then goes blank for a second and then the error message in the task bar.
I have just ran all the MS updates and also installed the latest GFX driver from ATI to see if that makes a difference.
I have also just ran 3dmark06 and that ran OK but I was expecting the fans to kick in at some point
When using bootcamp with Windows 7: My 1080p output is shrunk as if it has the wrong overscan settings. I am using a direct HDMI cable and the display works just fine when using OSX Lion. I tried updating the AMD Catalyst software directly and there is no change. In fact: it's as if the catalyst didn't even install. I can't find the control panel anywhere. It's not the monitor, I tried all the auto adjustment stuff. Plus, again, it works in OSX It's not a cable. I tried switching them. Other computers display correctly to the monitor (Acer, 1080p)Â
Info:
Mac mini, Mac OS X (10.7)
I've been having a nightmare getting WIndows 7 to work properly with the second display on my MBP 15" (Early 2011) i7.Â
I'm currently running Lion 10.7.4 which works fine on both the internal laptop panel and the external AOC monitor through a Thunderbolt -> VGA Apple Adapter.Â
Bootcamp installed Windows 7-x64 with no issues, but when it came to trying to get the second monitor fired up it wouldnt.Â
I noticed when I installed WIndows and when I boot into it, that the screens mirror one another, I take it this is the Intel GPU running. I'll explain why in a bit.Â
1) I updated all the bootcamp files through Apple Update, no change
2) WHen I extend the displays, Windows sees the display, make and model without any issues, but it gets no signal
3) I then manually removed the ATI Radeon HD6xxx drivers manually, rebooted and both displays mirrored again throught a 'standard VGA adapter', this is why I assume this is the Intel kicking in.
4) I downloaded the latest ATI Drivers... ATI Mac Drivers -> Bootcamp -> Macbook Pro
5) Rebooted, and still stuck at step one now...Â
Info:
Mac OS X (10.7.4)
I have an 13" MBP that I ordered new in April, 2012. It is running Lion. I have an external monitor that is capable of 1440x900 resolution. I have an external keyboard and trackpad hooked up, and I like to close my MBP up and stick it in a BookArc. I want to be able to have the internal display disabled and to have the MBP only allow me to put windows on the external display, so long as the lid is closed. I also want to be sure that I am taking advantage of the resolutions available on my external monitor, which are higher than those supported by the internal display (specifically 1440x900).Â
This doesn't seem to work because I either have to allow the MBP to continue to draw my desktop across both screens (internal and external), OR use the "mirror displays" mode, which restricts my resolution of my external monitor. This means I either forgoe the additional resolution benefits of my external monitor, or I end up with windows that fall off-the-cliff, so to speak, because they are drawn in the portion of the desktop that would be shown on my internal display (which is closed).Â
I've read the community support pages on using the MBP with an external monitor, most relevantly, this page. It simply recommends using the "mirror displays" option. However, this option, as I mentioned above, doesn't allow me to make use of the additional resolution, and my external display looks bad. how to keep the 13" MBP in closed clamshell position, with the internal display disabled, and use my external monitor at resolutions higher than those allowed by the 13" MBP but which are available to my external monitor when not in "mirror displays" mode?
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), External display (1440x900)
So just recently, whenever I restart my mbp and hold down the option key for the bootcamp option, it is taking atleast a minute to get the option of either mac os or windows to be displayed. Earlier, this was very feasible as the options would be displayed rather instantaneously. Could someone please help me out as the wait time is horrendous to the least.
View 1 Replies View RelatedI just order the new MacBook 15" with the new 2880x1800 Retaina Display.Â
But I'm gong to run Windows 7 (and 8) on the machine, which have nerver been a problem on my current MacBooks/iMacs. But now I wonder how Windows will handle this resolution?Â
Windows has a DPI setting that makes everything bigger on a high resolution display. I never used it, and I don't know how well it works. Is that the way to go? Would you change the order to a none retina display, if you were me?Â
Info:
Windows 7
I have a late 2009 27-inch Imac, The display stopped working over a year ago, and i have been using an external display,Â
I recently installed BootCamp with win7 and now the built in Display has started working, but only when i am running windows.Â
Info:
iMac (27-inch Late 2009), OS X Yosemite (10.10)
I am wondering that is it essential to connect power adaptor all the time while operating in closed calmshell mode? When I unpluged the cable it didn't work. Is there some way?
Info:
MacBook Pro, iOS 5.1.1
I'm having a Left4Dead LAN party this weekend and was thinking of picking up a 24" ACD. I was just curious as to whether it'll still work in windows/bootcamp?
View 14 Replies View Related