I've connect the mac book pro to my LED TV with the headphone port as my audio output. After I disconnect it, the internal speaker did not work and the mac could not detect it from the system preference.Is it because of the hardware or software problem?
Info:
Mac mini
I was surfing the web, and suddenly the wheel started spinning and my MacBook locked up. I tried rebooting, only to see a folder with a question mark on it. So I tried to boot from the DVD and use Disk Utility to repair my HDD. But Disk Utility didn�t detect my hdd. So I assumed that the drive was dead and bought another one and istalled it.
The new hdd was not recongized by my machine either. Then I took the old hdd and installed it in a external case which connects to the computer with USB and I managed to boot OS X from it.
Anyone knows how I can make my MacBook detect my internal SATA drive?
I recently started re-using some Logitech Z-4i's with my MacBook. I used these speakers earlier in the year, and they worked well. I use them again, and they are not working well.
View 24 Replies View RelatedI am using Macbook Pro 13'', Mid 2010. Three days ago I attempted to connect the my macbook with an external speaker. It worked, but unfortunately, the setting remains at Digital Out. I first tried plugging my headphone, but I get this static voice, or sort of distorted noise (while playing no music of course); when I played music with my headphone on, I could hear my music along with this static or distorted noise. When I change the settings to Use audio port for Sound Input, it uses the internal speaker to play my music with no static or distorted noise. I have confirmed that my headphones have no problems.
Next I tested the sound on bootcamp window xp. The sound was working perfectly, headphones were working perfectly.
The only problem is when I use mac. When I attempt to increase the volume or decrease it, there would be a speaker symbol with a stop sign at the bottom. Whenever I play an audio and put the headphones out, there would be a red light but will disappear if im not playing any music. I have tried the toothpick trick and the headphone jack trick. Both fails.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.7.3)
On my new 15inch mbp the volume keys have suddenly stopped working. I checked in system preferences that the use F1 keys as standard is not selected. When I plugged in speakers or headphones the volume keys work as normal. But with just internal the little picture on screen comes up so the keys work but it doesn't affect the volume?
View 5 Replies View Relatedi have no sound on my macbook pro and no internal speaker option in the system preferences.
Info:
MacBook Pro (17-inch Mid 2009), Mac OS X (10.6.8)
If I have my Mac Pro connected to external speakers, is the startup bong supposed to be played through the internal speakers? When I had my PowerBook connected to speakers, it played the startup noise through them, not the internal speaker.
View 4 Replies View RelatedPeculiar problem. My sound suddenly switched to being internal speaker only, even though I have decklink HD Extreme card and was using it as my audio output the night before. Narrowed the problem down to anything being plugged in to the firewire ports - FW400 and FW800 ports and drives or even my Mini DV deck. When I plug anything into the firewire ports, trying to get to the sound settings in system preferences hangs, and all sound will only work on the internal speaker. This is a sudden problem and leaves me only being able to plug in esata external hard drives. There is some sort of conflict going on somewhere.
Mac Pro 2008
Mac Osx 10.5.8
Decklink HD Extreme card
Recently installed LaCie eSATA II PCI Express Card.
Use the machine mostly for video editing, so really need the external HDs.
I just turned on my G4 17" 800mhz iMac and there was no gong. I thought it was just turned down. So I opened iTunes and cranked the sucker 2 notches past 10 and still nothing!
View 2 Replies View RelatedI have a small issue on my iBook (G4) that's been driving me a bit crazy lately. I noticed a few months ago that when I selected a song/video on iTunes to play, I would get uneven volume output on my two internal speakers. I tried restarting iTunes, restarting the computer, etc. to no avail. In addition, sometimes this problem would not arise for a few days, and then suddenly start up again.
I then dug up the program Audio MIDI Setup and saw that the sliders were uneven . Once I slid them back together, I thought I had solved my problem. Nope! It came back, and I even saw that if I opened up Audio MIDI Setup right after the computer turned on, the sliders would be skewed even before opening iTunes or Safari or some other program that used audio.
I've come accustomed to manually balancing the volume output, but the irregularity of this problem occurring frustrates me. Attached is a screenshot of Audio MIDI Setup with the issue--note the Audio Output sliders.
Set the computer to output to speakers, keyboard vol controls etc control the speaker sounds and "pop" out of the speakers.
Sleep the system and it reverts back to the internal speaker, even tho the output from iTunes, Quicktime or whatever comes out of the speakers.
Does this happen to anybody else?
I have a Mac Pro 2x 2.66GHz Dual-Core (4 Cores) Xeon 5150 (Early 2006).The internal speaker chimes when I start up even though I have external speakers connected to the analog output on the back.
Info:Mac Pro, Mac OS X (10.5.8)
Mine sounds muffled on the left when compared to the right speaker.
Its very noticeable when you play around in your balance settings (max left or max right) that the volumes are different.
I woke up this morning and tried to watch a linked video on a webpage. I saw the video, but there was no sound (this had not been a problem the evening before). I am using USB soundsticks, so I checked to make sure that they were plugged in, and they were. I opened iTunes and sound came through the Soundsticks; I switched to the internal speaker and it worked there as well. When I tried the same with another embedded video, however, I only got sound from the internal speaker.
Has anyone had a similar problem or does anyone know how to fix this?
The tower speaker just doesn't cut it and I want to hook up my 5.1 Locitech speaker system. I couldn't find any Mac sound cards on newegg and am having trouble finding results anywhere else. What card is recommended by most Mac Pro users? My professions isn't in audio so it doesn't have to be perfect, just something to play games, music, and movies.
View 5 Replies View RelatedI have a 2.1 Logitech Z4 setup, and the sound is only coming out of the left speaker. I have checked the wires, they are fine, and both speakers do work - but it could be the socket that's the problem. It's plugged into the line-in socket, I have put the output in System Preferences to Headphones, and everything is inserted correctly.
What do I do?
EDIT: My sound system is plugged into the headphones jack. I have tried putting headphones into the headphone jack and the sound also only comes out of the left earbud.
Just because I'm curious and hadn't seen this in the disassembly or any threads I searched for...How good is the internal speaker on the new Mac Mini? If you own/owned the old mini and got a new one can you tell us your opinion on the internal speaker compared to the old one.
View 1 Replies View RelatedI recently purchased a new SSD and would like to input that into my MBP 2012. If I have a partition on my external HDD that contains the carbon copy of my MBP, am I able to clone it into my SSD after I have installed it in the MBP through the USB?
Internal HDD --> External HDD
Place internal HDD into optibay, and place SSD into the harddisk slot
Connect External HDD via USB to MBP
CarbonCopy to new SSD via USB from External HDD
Format Internal HDD
Will this work?
My MacBook Pro (15-inch i7 Early 2011) won't detect an external display using an apple mini displayport -> VGA connector using 10.7.3.All cables and the monitor are fine because my white macbook detects the LG monitor without any problem.I have read and tried every 'sollution' suggested on the internet, but all fail. Since my MBPro can't even detect my Sony LCD TV (my white macbook does) i suspect it's a firmware/hardware issue.I want to buy a thunderbolt display, but am not sure if i can spend all this money when even this simple VGA connection won't work.
View 1 Replies View RelatedMy MacBook Pro won't detect my SanDisk USB, I recently had the same problem with a card reader. Initially, I thought it might just be the card reader but now I'm thinking it is an issue with my MacBook.
Info:MacBookPro
my macbook pro can't seem to detect ANY usb drive. I have already selected to "show external disk/drive" on finder's preferences but it doesn't work.
Info:
MacBook Pro with Retina display
I have a macbook pro (penryn) that just stopped working. I believe the hard drive just died on me because whenever I try to boot up, I just hear this clicking sound. I think I may have a bootable backup I made with SuperDuper! a while back on my external hard drive. I tried connecting it to my MBP but it wouldn't detect the drive. I only get the mouse cursor when I hold down the option key at boot.
Does anyone know if this may be a known defect? Do you think Apple will replace the hard drive for me?
I have a Macbook and I just bought an iPhone 3G and it seems my mac is totally not responding to my iPhone.I have the latest updates but to no avail.I also have also just loaded intego virusbarrier 5. I heard that it is interfering with the sync of both devices. So how do resolve this problem without having to erase and re-install my harddisk
View 3 Replies View RelatedI have been moving over the week and when i was setting up, i accidentally plugged the wrong ac adapter into my usb hub.
the next thing i notice, the usb is no longer working. keyboard, mouse, etc, not working, the other ones are
initially, the wifi card went out to with the other usbs. i did two reboots and the wifi and other usb ports came back.
the one where i plugged in the usb from the hub is dead
is there an easy fix for this? im pretty sure there isnt but i had to ask. how much will apple care charge to replace the usb?
Macbook cannot detect keyboard when starting.
Info:
MacBook, Mac OS X (10.7.3)
I passworded my external hard drive using disk utility. the system does not detect the drive after i did a clean install. what do i do?
Info:
MacBook Pro, Mac OS X (10.7.3)
how to detect flashback virus? Then, how to remove it-if found?
Info:
MacBook Pro
I have a 2011 MBP (thunderbolt) that I've had for about a year now. I use it daily at work, with an external LCD monitor connected with a mini-dvi -> DVI, no problem, except for the occasional need to restart when first connected.
However, at home I have an AOC Razor 24" monitor that until recently was connected to my home PC via HDMI, working just fine. However, my PC died and now I would very much like to be able to use this monitor at home until such a time when I get around to finding a desktop replacement. My MacBook Pro, however, has completely different ideas it seems... It completely refuses to recognise the monitor. I don't get the blue "flash" and it doesn't show up int eh display panel at all, not "sleeping" or otherwise, it simply looks as if it's not there.
Having trawled the forums, I've done the Jan/Feb firmware update, I've tried two different HDMI converters (One the Moshi from my local Apple retailer, the other a no-name brand converter, which works fine elsewhere), I've even tried a mini-dvi -> DVI -> HDMI converter (I know, I didn't expect it to work, but when you're at then end of your wits, you're at the end of your wits ). I've gone through three HDMI cables and tried an assortment of "black magic" solutions found on the net, with the adapter half-way plugged in, resetting the PROM, closing/opening the lid, running gfxCardStatus ( just in case it did something ) and checking the monitor elsewhere.
The only thing I haven't done (that I can think of) is swap the actual MBP,however, as mentioned, I use an external DVI monitor every day, so it doesn't seem likely that that's where the problem is... I'm guessing it's got to do with how the monitor handles HDMI or some such thing but I don't seem to be able to find much of a comment from anyone else on the net, so here I am... I considered sacrificing a goat at full moon, but I'm not entirely convinced that'll do much either and I upgraded to Lion as I saw a throwaway comment somewhere from someone, indicating that that might or might not have helped them with a slightly similar problem... So this problem now spans 10.6 AND 10.7...
Info:
MacBook Pro, Mac OS X (10.7.3)
I am a high school student who has a reading problem that use audiobooks and i would like to know how good the speakers are in the 13" MBP.
View 10 Replies View RelatedI was listening a video on my MBP and everything was working fine. I then put my headphones away when I decided to listen to something else so I was what the heck I will just use the speakers but it seems as if they are turned off or something. I keep trying to put the volume up and down and it just comes up with the speaker picture with a circle and line through it. I looked up at the volume in the bar and it is grayed out at fun volume. When I plug in my headphones, the volume turns black again and allows for adjustment.
Did I accidentally turn off my speakers? How do I turn them back on or fix this? They were working totally fine earlier today but now they are not.
