IMac :: Question Mark Folder On Boot And Data Recovery?
Mar 20, 2010
First , scuse typing asrushing this on iPhone!
Got ?folder on boot on late 2007 21"iMac today. Have tried usual stuff including resettng pram and booting from cd. 1st time I booted from install cd it wouldn't even mountthe HD. Turned off and left for a few hours to cool down. Next time ibooted from cd HD mounted and I ran disk utilty repair bit it said there were no problems. Tried to boot from HD no luck.
So, guessing HD is fried:-(
so, before I take it to the apple store to get it replaced (doubt under warranty) or do it myself I want to see if I can recover the mportant data. While I am sure it's all backed up on cradhplan I have 80gb of photos and I'd rather ecover from USB to ext HD instead of over Internet from cradhplan.
So, I'm thnking... When my TM blew up last year I took the HD out and took it to work and slapped it in a drive bay of my mac pro, recovered the data, put it back in the TM before shipping it back to apple for a replacement (that then went on eBay since I got cradhplan)
so; question 1: can I take the HD out of the iMac and have a go installing it in my mac pro? Will an iMac HD fit in the mac pro case/bay?
Question 2: all my photos are also on the apple tv. Can I copy them from the apple tv to another mac if my backup had failed and doesn't restore or I can't recover from iMac HD? I know I had cradhplan set to backup iphoto library but I upgraded to aperture 3 recently and am worried that I have nit set crashplan up to backup the aperture library
Had to perform disc repair a couple of weeks ago and reinstall to defaults. At that time had spinning wheel when trying to start. Now have flashing folder icon with question mark, and cannot enter utilities or start from recovery USB.
I installed Lion on my Intel iMac (about 3 years old) several months ago and it was working fine. Then yesterday it stopped booting up. It loads a grey screen and then just shows an icon of a folder with a question mark in it. I tried the following:Holding Shift to start safe mode - no response, loaded question mark screenHolding Command Option P R - no response, loaded question mark screenRepair Disk from Disk Utility - says "the volume Bernard 1 appears to be OK"Verify Disk from Disk Utility - no response, loaded question mark screen I created a Lion recovery disk on a USB drive
My macbook won't boot. A folder with a questionmark keeps flashing...What do I do, so I don't lose my documents?If I send it to reperation, will they see the last thing I did on it? Cause it was quite private...
My Friend gave me his Old IMac G5 and when I boot it a question mark and the finder folder blinks. My friend says to install OS X because its running on nothing and I have been trying to install. OS X 10.6 but it wont respond to the Disk it just keeps blinking after a while it starts making this. Loud noise as if its running something, the furthest I've got it to a blue screen with a replay icon button. Towards the left and an arrow button pointing right but cant do anything after that, I don't know what to do. My other problem is the I have the latest wireless keyboard and wireless magic mouse so I cant connect them thru wifi until I have my imac running so im using a normal Dell Keyboard....
I'm having an issue with my PowerBook G4. It wouldn't turn on at all before, so I installed another motherboard. Now it will power on, but it only shows this folder icon that blinks. I'm a complete n00b to macs. If this were a PC I would of fixed it by now. I need some help. I've tried the installation disk, but when I hold down the C key, it takes longer, but it just shows that folder again. When I hold down the Option key, it only gives me a reload button, and an arrow button, but no boot up options. Do you think it could be a problem with this other used motherboard? Or is it that I just didn't put it in right? I've double checked all the hardware, and it seems to be all connected. The keyboard lights up, and the trackpad works, and it makes the boot-up sound.
I have just upgraded from a Macbook to a Macbook Pro and just swapped my hard drives. My OSX partition still works perfectly but when i now try and boot to my XP installation the laptop hangs and after about 30s i get the grey screen with a folder with a question mark in it which then blinks/flashes on the screen.
Does anyone know why this has happened???? I have googled it but to no avail. I havent tried to re-install windows yet, I hoping there is a quick fix.
I just bought a new iMac. I have been trying all week (with no success) to transfer files and apps from my previous iMac. The last time I tried to transfer, I used target mode on the old computer. It looked as if it was finally working, so I left with 2+ hours remaining on the transfer. When I returned, the computer was frozen and nothing would work. So I held the power button to turn it off. When I tried to turn it back on, there was only a gray screen with a flashing folder with a question mark. I feel like I have tried everything listed in other discussions. The only thing I am not able to try is to reinstall Lion because the new computer did NOT come with an OSX disc of any type.
My hard drive recently failed on my 2007 imac and having not backed up my mac for about 18 months I had to pay specialists to retrieve my data, which they put onto an external drive. I then got a new 1TB hybrid drive installed. Tonight I finally got my computer back. Very naively I was thinking I would be able to pick back up from where I left off. Before my drive broke I had Mavericks and was fully up to date running software like Logic X. Now I am back on 10.6.8. Can I just skip now straight up to Yosemite?
So, I was on windows, using bootcamp, and I was creating partitions on a pen drive with it, and then it asks me that it needs to restart to apply changes.
But then, while restarting, a blue screen occurred (**** windows).... And I forced the shutdown pressing the power key.
Then, I simply turned the MacBook on, trying to boot on my snow leopard and I got a flashing folder with a question mark on it. Now I can't access any partitions on it, if I press option key on startup I get a blank window!
I tried to reset PRAM, repair the MacOs partition using the snow leopard DVD (it shows up fine, along with windows partition and EFI partition), and I still don't get my startup disk showing up...
Info: MacBook Pro, Mac OS X (10.6.8), Snow Leopard with windows7 bootcamp
My imac from 2009 won't boot up. It just keeps flashing a grey file folder with a question mark. Of course now I do not know where my start up cd is.....is there anything that I can do???
So I went to sleep and my computer was just fine, just sitting there being normal as normal gets. I wake up and the cursor is beachballing, no response from anything, holding power button doesn't do anything, so I unplug it. Now when I turn it on it goes to the gray screen with a folder with a question mark blinking. Google told me that this means it can not find the startup disk, and my hard drive is probably toast. Upon advice of forums I grabbed my snow leopard install disk and am going to attempt a boot from disc after work today. If this does not work is it safe to assume I need to replace the hard drive? Computer is out of apple care so this will be a DIY operation.
Computer: 24" iMac, 2.8GHz core 2 duo, 4gb RAM. Questions: - What risks are involved with taking apart the iMac? What tools would I need? - After I install a new hardrive, is it as simple as simply popping Snow Leopard into the disc drive and going from there? - While I have it open, does anyone know if this model iMac has room for more RAM?
My iMac 20" is giving me white screen with the question Mark folder, some smack head formatted it and now it won't respond to the install disk, it won't even beep on a pram reset and there's no chime?
The problem is that the mac will not boot period.When I press the Option on start up, it takes me to a screen where I could select to boot from the Macintosh Hard disk or Recovery 10.9 disk.Choosing either of these still does not boot up the computer.
I think that the hard disk is damaged but what I do not understand is why I can still get the option to choose the Hard disk or the Recovery disk.I am waiting to hear from Apple Support on when I can take my imac to the genius bar and I was wondering if there is anything I can do before then. Intel imac 27-inch bought refurbished in November 2010 with imac apple care.Intel quard core processor, 4 Gig RAM, 1 terabyte HD
own a mac 19" desktop computer, it turns on but only flashes a picture of a folder with a question mark in it. is it done? any input would be appreciated.
I purchased a new optical drive from a reputable mac seller in my area and installed it due to the old one not reading disks anymore. I was very careful and followed the instructions according to an article I found on [URL]I found on xlr8your macHowever, now when I start the computer up, I get the question mark folder. I've done a little research but thought I' check the Macrumors forum before I spent all day on this. The store where I bought the new optical drive from doesn't open for another few hours so, here I am.
I have an aluminium cased iMac (2.66GHz Intel Core 2 Duo) running OS 10.6.8.
Recently I have found that sometimes the machine will not boot - I get the normal chime, grey screen and then the flashing question mark icon. I first noticed the problem a few months ago when restarting after a power outage had occured whilst I was using the Mac. After a couple of tries the machine booted and so I thought little more about it because in usual circumstances when the machine was shut down correctly it started as normal and behaved perfectly. However, after another power outage over the weekend the problem has become much worse.
I have tried all the usual things like trying to boot up in safe mode and recovery mode but with no success. The only way I can get the Mac to boot at all is to simply keep powering down and powering up again and hoping that it will spring into life. Once it does boot the Mac behaves perfectly.
I have an 10.6.8 universal system disk and I got the machine to boot from this disk. I then tried to perform some diagnostics on the hard drive (320Gb) but when I got to the pane that shows the available drivesthere was no drive to be seen.
After a lot of tries I have got it to boot off the hard drive since so, I have been able to back up files that weren't archived to an external drive.
I have a EMac with Mac OS X vs 10.3.9 Prior user erased hard drive. Took to ADR data recovery and they scanned the hard drive and were unable to recover any data. Looking for input on other techniques to recover data from hard drive or other companies that specialize in Mac data recovery.
I'm on a 2008 model Mac Pro 8-core system for work. For whatever reason it doesn't have a recovery partition. I read that if I don't have a recovery partition, I can't make a recovery USB bootable drive....so how do I make one? And no, I cannot reinstall the OS on here, that would be beyond detrimental to what's going on here. (too many details to get into)
Alternatively, can I make one with my 10.8.5 MacbookPro at home and run it here on my Lion system?
How hard is it to replace the hard drive? I have a disaster recovery company step up to get all my info off of it if they can. But I really don't want to spend the money to have someone pull out the HD and put a new one in if I can do it myself. I have experience building pc towers but I haven't ever pulled apart an iMAC. Its an iMac 23(or 24) inch from Dec 2007 (I don't have the model info on hand as the box is in storage).
So, I'm trying to recover some lost files. I put it on Data recovery 3. Everything went fine until the power in my house went out, stopping the entire process. NOW when I try to run the process, it just stalls at 33,3%, with no indication of how much time left...
DATA RECOVERY SOFTWARE - OR - DATA RECOVERY COMPANIES?
I shot a film this summer on RED ONE digital camera, and now BOTH of my Lacie 2TB drives in which we deposited the footage aren't working. I NEED to recover data.
In researching here and online, I've looked into software options such as Data Rescue 3 and Disk Warrior.
I've also investigated companies in which you mail the drive into them. Lacie themselves recommended a CA outfit called Drive Savers Data Recovery; I've also investigated On Track Data Recovery (the world's largest), and ESS Data Recovery. There's also Tekserve here in Manhattan.
Does anyone have any experience with any of these options/companies specifically? Huge differences in price; everyone seems confident, ESS the most realistic.
What is the best route to recover my film?
The drives have about 800 GB of film footage - in the form of RED's proprietary software - R3D file extensions, plus Quicktime proxies.
Here are the drive issues:
DRIVE #1 - My Master copy of film: my iMac had OS 10.4.11; the drive mounted no problem; I upgraded a few days ago to Snow Leopard 10.6.4. Now it doesn't mount. It's in Disk Utility but the volume line is greyed out. The Apple Store folks tested my iMac and my drive and said it's the drive. They said it was just a coincidence that the drive developed an issue at the same time I upgraded my OS.
DRIVE #2 - was initialized in a Dell laptop, but NOT formatted.
i have a hard drive i use mostly in Windows that i lost data and want to recover it. i've played with some of the free utilities on the internet but they either take too long or aren't very good.
since Tiger reads NTFS partitions i was going to try it on my Mac Mini.
i usually use a laptop and don't have time to leave the recover running for 10 hours or more. any good free utilities out there?
Some of my beautiful photos have been deleted. So I asked the quetsion on Yahoo Answer. Someone recommend me to use Nice to Recover Data for Mac. Can it help me to recover my favourite pictures?
