I have done a clean install of Snow Leopard and used migration assistant with time machine to bring system back to original state. My problem is time machine now says I don't have enough space for a backup. The iMac has a new hard drive so I am not sure what is going on. I could always Format and restart TM but I am not real happy about trying that. It will be may last resort.
View 2 RepliesI've bought a 1 TB iomega ego mac edition II external fire wire drive. Once connected it asked whether i want to create a password and whether i want my data encrypted, to which i answered yes. Then a time machine backup started and failed after backing up 5.25 GB out of 39 GB of my data with the following error: "The backup disk ran out of space unexpectedly. Time Machine will try to make more space available by removing expired backups during the next scheduled backup". When i look at time machine it shows there is 994.29 GB available on iomega ego drive. The drive then went into: "Encrypting Backup Disk" message and it takes forever.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.3)
I just replaced the stock 160GB HD in my unibody macbook with a WD Blue Scorpio 640GB HD. I used Super Duper to clone the old drive to the new one, approximately 115 GB.
Now Time Machine wants to backup the full 115GB to my Time Capsule, which kinda sucks because it's going to be a redundent backup that's gonna take up over a 10th of my TC's space. Is there any way to avoid this and still use Time Machine?
My MBP has a 500GB HDD and I have about 70GB free. My backup drive is also a 500GB HDD and has been erased. I chose the drive for my Time Machine backup but it fails and Time Machine says it needs 507GB when the estimated was only 429GB. Why does it need the additional 80GB?
View 1 Replies View RelatedMay I know if lets say the size of my MBP's HDD is 500gb, must i get a bigger hdd just so time machine can work or i can just get another 500gb?
reason for asking is because, due to those computer calculation etc, the external harddisk maybe a couple of mbs smaller than that of the internet harddisk.
What should the optimum space of my external HD be, in order to keep my Timemachine backup in? My MBPros HD is 185GB, how big should the external drive in which the TM backup will be made? And why?
View 1 Replies View Relatedwhenever I run Time Machine on my PowerBook G4 (1.5 Ghz / 1Gb RAM / OSX 10.5.8) it will eat up GB's of hard disk space while 'preparing the backup'. After that it finishes the backup, but I don't get the space back. I'm talking about the internal HD, not the external target disk of course. Does Time Machine use the space to generate some temporary files? Any ideas how I can get my disk space back
i was wondering how much space should i partition for my time machine backups on my 500 GB external drive. I currently use about 120 GB of my 320 GB internal MBP hard drive. Would 350 GB be enough for my time machine backups? Or more or less. What did you guys do?
View 7 Replies View RelatedI have a 15" MBP with a 250GB HDD. I have about 150 gigs free, so obviously only 100 gigs are in use. So if I use my external HDD to backup to Time Machine, will I only need 100 gigs of it, or will Time Machine need the full 250GB for the backup?
View 3 Replies View Relatedor set it up to overwrite the oldest material.it works fine on my laptop, but i added my new imac to the time machine backup and it never works b/c it says backup full, so its yet to do a backup
View 5 Replies View RelatedI just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?
Info:
MacBook Pro, iOS 8.1.1
Time Machine reported it failed backup due to the shortage of disk space. But I see the total space of partition is 192GB，the whole backup snapshot estimated is 177.56G.
The massage said that " failed backup, 52.85 GB is needed for backup but it's only 25.17 GB available."
I know it's 166.35GB of ancient snapshot still exist, but why not OSX to delete it automatically and release more space for new snapshot?
By the way, I can't delete those ancient snapshot in Finder manually, perhaps permission denied.
Info:
MacBook Pro (Retina, 13-inch, Late 2013), OS X Mavericks (10.9.4)
My entire iPhoto Library is gone, inaccessible, doesn't show up in finder. I tried to restore my last Time Machine back up but it says that I don't have enough space on my startup disk. In order to create space I deleted everything nonessential and moved all of my essential folders such as documents, photos, videos, everything, etc. to my external drive, then deleted them from my hard drive. I emptied the trash to make sure that everything was wiped.
I tried to do the Time Machine back up of my iPhoto Library again and is still says I don't have enough space. I looked at my storage under About this Mac, and it says that 120.35 GB of my current computer storage are photos, however, I don't have ANY photos on my hard drive at all. I don't know what to do because I can't delete applications and there is literally nothing else I can delete from my computer, so I don't understand how 135 GBs of storage is being used up.
Could there be somewhere my photos are hiding? I just don't understand why my library got deleted in the first place for that matter.
Info:
MacBook Pro, OS X Mavericks (10.9)
I have a macbookpro 17" leopard en imac 20" leopard.
I want to use time machine to back my macbook pro but i have no space of my first external(western digital). And normaal external disk ntfs usb not supported by time machine.
So my question is it possible to make my external ntfs disk for time machine or the imac with shared disk or map or something?
I have set my seagate to be used through time machine and I am having the hardest time finding things. After reading a thread I found out how to view my backed up photos in iphoto through time machine. The problem is. We reformatted our IMac, and although I can find the other photos that were saved on there. I cannot find any of the photos that were once in Iphoto, as iphoto is now empty. Do you know where those photos may be or have I lost them all?
View 4 Replies View RelatedI have looked into this a lot already. It is to much that Time Machine backs up every single hour! It would be nice to set it to something like 3 or 5 hours. I have tried a 3rd party app to do this, but... If my computer was off or asleep when it was supposed to back up, it would get an error. It would not just do the backup when i turned it on or when it came out of sleep like stock Time Machine does. I have also seen a way to change the time incraments in the Terminal.(I am very good with it, not a noob) I have tried this and it screws up time machine completely. Maybe it does not work with the newest OS X. By the way... I have a 2010 MacBook Pro, got it 2 months ago.
Does anyone know a solid 3rd party app, that will work seamlessly. Or has anyone changed the time in Terminal and are currently using something different than 1 hour. There is a lot of examples online, but I would like the codeing that you literally used.
I just got an imac and use the option to restore from my MacBookPro Time machine Backup.
When I restart the machine after the restoration, it won't boot pass the grey apple logo
why i'm not able to boot up from my restored high drive
Ever since I upgraded to Lion my iMac freezes or nearly freezes for 5 - 10 minutes every hour while Time Machine updates the back up. What to do? I have tried everything I can think of but its only improved from total freeze while Time Machine backs up to freeze with an occasional few seconds of activity.
View 2 Replies View RelatedCan I use Time Machine to backup multiple drives of one computer?
Info:
iMac (27-inch Mid 2010), Mac OS X (10.7.4)
I am getting the following error from Time Machine when doing my first backup. The startup disk being backed up, and the TM disk are both the same size.
Macintosh HD: 465.44 (total); 393.99 (free); 71.45 (free)
Time Machine: 465.44 (total); 465.29 (free)
The Time Machine error is: Quote:
"This backup is too large for the backup volume. The backup requires 472.7 GB but only 465.3 GB are available." why would this be? Other disks are excluded from the backup, and Time Machine is telling me that it needs more space than it actually needs. What should I do?
I want to wirelessly time machine backup to my time machine hard drive already attached to my iMac.
View 1 Replies View RelatedI still have my serious video ram problem set my other post. The apple store wanted $650 to replace my motherboard and the cheapest i found one online was $950, all for a machine that SL will not even support. I am limping along waiting for my i7 iMac to show (Whenever that is)
Here is my question. I am not sure if my data on tis machine is corrupted by my video ram problem so not sure I want to do the firewire transfer, that is if my machine will even last till my new one shows.
I have 2 back-ups a time machine and a super duper backup of 99% of my stuff. If I use my time machine back-up wont it wipe SL OS 10.6 off the new machine? When you do a TM back-up from disk utility from the OS10.5 leopard start-up disc, it says that it will completely wipe your HD clean.
BTW do any of you experts know if my video artifact problem is corrupting my files or just my video, while I am typing this everything looks good unless I look at my menu-bar or dock which is pretty distorted....
I just got a new MacBook Pro for graduation. I've decided to use my iMac as an external display and use my Macbook Pro as my main computer. My iMac has about 1TB of space while my MacBook has about 500 GB. Since I'll be using my iMac primarily as a external display I was thinking about also using it as an external harddrive so I can backup my data from my Macbook via Time Machine.Is this ok to do? Does anyone advised that I don't? I just want to make sure I don't screw up anything before doing so. BTW I also have a WD external harddrive connected to my iMac.
Info:
MacBook Pro (15-inch Late 2011), Mac OS X (10.7.4), Main Computer
I've recently starting having problems with my external HD that I use for my Time Machine backups. I'm not able to repair the drive using Disk Elements, so I want to copy some of my backups stored therein onto my Mac HD before I try reformatting the external HD. However, I get the error message "The volume has the wrong case sensitivity for a backup" when I try dragging the backup folders onto my desktop. Is there any way to salvage the backups before I try reformatting?
Info:
iMac (21.5-inch Mid 2011), OS X Mountain Lion (10.8.5), External HD: WD Elements 2TB
I have an iMac desktop with OS X version 10.9.4 Mavericks operating system. Processor 2.06 core 2 duo Memory 4GB 1067 MHx startup disk hard drive.
Problem is I deleted some photos from my hard drive to free up space, thinking I could access them from my backup drive if I needed to. However, when I try to get the photos through my TimeMchine backup drive, it won't let me, saying it's not the original library. How do I access my old backed up photos?
After some problems with Time Machine backup, I removed a bunch of stuff from my internal hard drive, reformatted my external HD used for backups, and started a new full backup. Time Machine has been running for about 24 hours and gives me a status of Backing up: xx GB of yy GB. Both xx and yy keep growing (apace) so that I don't believe xx will ever equal yy.
To cryptic? Here are real numbers. My internal disk being backed up contains 469.39 GB. Backup status now says Backing up: 685.78GB of 754.42 GB. Both numbers just keep growing. I'm happy to let Time Machine overnight (again) but, really, this can't be normal.
Info:
iMac, OS X Mavericks (10.9.4)
iMAC with OSX10.9.4 ; 8GB ram ; two partitions external disk formatted MAC jurnaled ; connected via Fire Wire or USB2 .
During Backup the sistem get stack and display into the "details window" Time machine was unable to complete the backup because unable to complete the backup folder.
This problem happens with USB and Fire Wire. The file backups.backupdb is excluded from virus scanning.
Also happens time to time that (without doing things) both the partitions of the external disk disappaire from the desk-top and a message "the disk must be ejected properly" is displayed.
This two problems are independent une to the other. I have change the backup disk but both the problems persist.
Info:
iMac, OS X Mavericks (10.9.4), 8GB ram ; external backup HD
I was a PC user who recently moved to mac. I have a macbook (intel 2.2GHz, 2GB RAM, 250GB HDD). When I was using PC, I backed up all my data to a network storage device (Buffalo LinkStation 250 GB connected to a 802.11g netgear router which is supplied by Sky) using a program called SmartSync Pro, which worked very well. Although I can connect to and mount the Share folder on this drive when the macbook is connected to the network, Time Machine will not back up to it. It wouldnt even recognise the disk on the network.
So I went onto the trusty internet, and found that you can get time machine to recognise the Share folder. (This was obtained from: http://blog.imulus.com/george/software/using-leopard-time-machine-to-backup-of-a-network/)See my comment on their page at the bottom, number 66.
It recommended entering the following in to the Terminal: defaults write com.apple.systempreferences TMShowUnsupportedNetworkVolumes 1
Before attempting backup I have to go into "Network" and select the Share folder by double clicking on it. This seems to mount the volume. After this, it can be seen in Time Machine as a potential backup destination.
However, this method does not work for me. Time Machine "prepares" for a while, then gives the following message: Time Machine error. The backup disk image could not be created.
More internet searching took me to macosxhints which suggests creating something called a sparsebundle image on my local system. (http://www.macosxhints.com/article.php?story=20080420211034137) Have not tried this yet as I thought it would be prudent to seek some help first.
Apple have deliberately disabled the ability for Time Machine to back up to network attached storage, (except of course to their proprietory Time Capsule):
Is this because time machine requires a network faster than 802.11g?
Is this because a time machine backup to a network attached storage device is unreliable and the data is corrupted?
I dont want to shell out more cash for a time capsule. I would prefer not to have to hardwire to an external drive (which I will also have to go out and buy). Any thoughts?
I just purchased a Seagate 3 TB USB 2.0/3.0 external drive to use as my time machine backup drive. I have a MacBook Pro that was purchased about 3-4 years ago. The MacBook Pro has a 120 GB hard drive and is currently running MAC OSx 10.6.8. I also have another WD 1 TB FireWire external drive that I use to store all of my media files.
After I followed the instructions for installing the new Seagate drive for use with the MAC OSx, I initiated a time machine backup. It very quickly determined that it needed to back up almost 900,000 files totaling just about 400 GB. It started the backup process at a rate of about 1 GB per minute. In a little less than an hour it reach 53 GB and remained there for an additional two hours before I decided to stop the backup.
Once I got the backup stopped, I deleted the backup and decided to look at my energy saving settings. I noticed that the "Put drives to sleep whenever possible" check box was checked, so I unchecked that option and restarted the MAC. I then initiated the time machine backup again. Like the first time it quickly determined that it needed to backup the same amount of data as before and started the backup process at a rate of about 1 GB per minute. Before going to bed at around 11 PM last night it was at about 60 GB so I thought I was out of the woods (having gotten further than the 53 GB earlier). When I woke up this morning at 5:30 AM it was sitting at 69 GB.
I am really frustrated at this point and don't know why the time machine back up would be failing on a brand new hard drive. PS - I was previously using a Seagate 1.5 TB USB drive as my time machine backup and never had any issues with it. I decided to use the 1.5 TB drive for a different purpose, which is why I have the new 3 TB drive to use as a backup. And I still have the full backup on the 1.5 TB drive just in case anything were to go awry.
Info:
MacBook Pro, Mac OS X (10.6.8)
I have a external HD which has always worked fine under snow leopard. Since upgrading to lion I keep getting the following message The identity of the backup disk has changed since the previous backup.The disk may have been replaced or erased, or someone may be trying to trick your computer into backing up to the wrong disk. And after this the drive disappears from the desktop appearing agian only after restart. What can I do do rectify this? Delete and re-intialise the drive?
Info:
MacProQuad2.6 4gbRam, Mac OS X (10.4.8)
