I'm looking at getting a system that will fly through digital imaging, both stills and HD video. I don't do much gaming, and frankly, with the exception of my photo hobby/passion, a iPad would have enough processor power. I've looked at the MacPros as well as the Macbook Pros and Imacs. For my imaging needs, the laptop, while nice to have portable power, doesn't have the display I need/want.
I've been seriously considering an iMac 27" with the i7 processor, probably 8gb ram (considered 16, but might be overkill) and 2tb hd. I WISH I could get one with a large SSD, but I guess not an option yet.
My other consideration was MacPro, this gives me lots of bells and whistles, and I'm thinking probably overkill (I tend to do that sometimes), although speed is unmatched, for all practical purposes.
My question is, would the iMac as described be sufficient for my needs or be overkill. Budget is liberal (within reason) but I know that I'm upgrading from my photoshop CS4 (PC edition) to CS5 mac version, lightroom, as well as getting new network setup for house and 13"macbookpro for daughter.
I have a Panasonic Viera (2006) digital TV. It has every possible port on the back (and even ports on one side.)The TV is connected to a digital TV tuner/hard disk recorder unit. The tuner also has a ton of ports. What do I need to do in order to send video from the TV to the Mac and record it on the Mac?(Either live TV or video playback from the hard disk recorder.)With my old analog TV, I used the Interview XLR8 USB video capture device with the Interview application or BTV application. (I think even Quicktime could record from the XLR too.)Seems digital TV doesn't work with the XLR8. Is that right? I tried the XLR8 with various combinations of inputs/outputs but can't seem to get any video to appear on the Mac.
I see that HDMI is one way out from Mac out and view on the TV.I also have a VCR and DVD player connected to the TV via a switcher box.With the variety of digital and analog outputs from these devices, seems I should be able to get video from the TV into the Mac.
Info: 2.8GHz Intel Core i5, Mac OS X (10.6.6), 4GB; 1TB ; 27"
I work for a higher education institute and we are looking into getting new Macs this coming summer, we've recently purchased two 2009 Mac mini's and I imaged them with our stock Mac clone (10.5.6). Obviously due to recent hardware changes it didn't work perfectly (no gui boot) but it did function, I just wanted to know if there was a way of updating key components to make it work perfectly so that I can integrate it instead of having to create a complete new clone?
As a full-time professional photographer, I use 20" iMac Intel 2GHz Core Duo machines (the original Intel iMacs), with the matte screens and maxed out with 2 gb of ram for Photoshop editing daily (CS3). I have found that the matte screens are awesome for imaging work... very accurate colors, no perceptible undesireable variation in color or brightness at different viewing angles. I've been verrry happy with these iMacs for production in my portrait photography studio.
NOW... recently I've considered upgrading one of my original 20" Intel iMacs to a current production 24" iMac for the larger screen area, 4 GB ram capability, and faster processor (filter processing!!!), but have been hesitant because of all the bad press I've read about using the glossy screens for professional color work. Complaints I've seen refer to distracting reflections of room/ambient lighting, a false, over-exagerated color saturation, un-even color/brightness across the full area of the display, light leaks, and dead pixels. What has happened to our beloved iMac?
If these criticisms are valid, I think Apple made a big mistake going from matte to glossy screens with the iMacs. I understand that Apple targets iMacs as just consumer machines... but the fact remains that a LOT of professional imaging people have chosen matte screen iMacs for professional work and the older matte screens were perfect for that.
I recently bought an eMac and it is the first mac that i've ever owned so I am not completely familier yet on what to do to make everything work. My problem - I have a digital camera that has the ability to take video. When I plug the camera into the computer iPhoto recognizes the pictures but neither iPhoto or iMovie recognize the video. It there a way to make this work so I can upload the videos to my computer? I know the videos can be moved to computers for I have done it on my pc.
Still trying to convert VHS video to digital to my mac. I am using a PYRO A/V Link Converter API-557. If my mac can read this device or its to old. I have tried every thing and my Mac can not see the PYRO converter via Firewire.
im trying to upload a video from my kodak usb camera M1093IS and i cant seem to find a way to do it. i plugged it in and i opened up imovie and my camera didnt show up. my camera also didnt show up on my desktop (which i understand to be normal since i used the search feature) but i still cant seem to find a way to do it. I need to upload a video for a school project.
Have just finished movie on MacAir with material from camcorder's hard drive. No problem in transferring material from the brand new camera. I have older digital material recorded on tape cassettes by Sony videocam which I would like to re-work with iMovie11. The iMovi11 manual says transfer to the Air requires a FireWire connection. I still have the older digital camera and the cables that came with it but neither the Air nor my Toshiba laptop have FireWire ports. Any thoughts on how to effect a transfer?
So i use iMovie 09's HD redering option for Youtube, so that is 720p, now that Youtube has an option for 1080p, what would be the best setting in iMovie to export in 1080p? iMovie only has a 720p Youtube setting. I files i have are full HD.
I'm considering picking up a 5th Gen Nano for my 7yo daughter. She's outgrown her kiddy camera. Is there an App that will allow her to take stills with it?
My wife has a MacBook and there is no firewire port. We are trying to capture video from our Sony Handycam mini DV camcorder but without the firewire port we can't capture the video in I Movie. Is there a way of connecting the Sony camcorder to the Macbook and capturing the video?
It seems no one has said Final Cut Pro is the optimum app for stills to animation and I have tried and can only agree, am unable to reduce the stills to 1 or 2 second flash to get 200 plus jpg's into short enough animations for holding interest of grandparents. Although this was secondary to what I purchased it for, bit disappointed after changing from 20 years of Windows..
Info: MacBook Pro, Mac OS X (10.7.3), New to Apple at 60+
Although I've had my MacBook Pro for a little bit, it's my first time using iMovie and wondered if there is a way to move the freeze frame stills into iPhoto.
i currently traded in an old macbook and gave my mom my imac. I bought a new mac pro but there is an issue with find my mac. i disabled find my mac on the imac and the macbook was wiped by bestbuy. however, both computers still show up on my find my mac app. it's not a huge deal but it's just annoying seeing 2 devices in there that will never actually be found.
So my late 2009 iMac doesn't like headphones. When I have no headphones plugged in, I get the sound fine, and the output shows as internal speakers. But when I plug in headphones, the output shows as Digital Output. ***!!? The red light used to be there but only when the problem started, now it's gone. I've tried toothpick, Q Tip, everything. I think it's a hardware issue cause it does it on Snow Leopard, Mavericks, and even Yosemite. Since it's an '09 model my warranty is gone.
I have a question about using an external USB hard drive. Currently I have a 1TB Western Digital "MyBook" attached to my 21.5" iMac. I am currently (and have been since I picked up this external drive) experiencing slow speeds on the drive. The slow speeds are primarily noticeable when (a) the drive has not been used for x minutes and needs to spin up, and (b) when I attempt to play music via iTunes or video via VLC directly from the USB drive. I've been copying the media to play from the USB drive to the iMac and playing it thus. Any ideas why the slow speeds are happening? Could there be a compatibility problem (i.e., USB HD is USB 1.x whereas iMac is USB 2?) or an incorrect setting (causing the slow access time for the HD?) Also any suggestions for upgrading the drive (SSD, FW)?
I've been lurking for a while reading posts trying to get as much info as I can. There are still some questions that I hope people can help me with.
I want to get a Mac Pro for medical imaging. I'll primarily be using Osirix which is a program for DICOM viewing / 3D image processing. I have a plugin that will do advance 3D volume rendering using CPU cores, so fastest CPU speed will be best. Don't know if the GPU will be critical, but I figure it couldn't hurt.
I will also need windows to access my work network and PACS system. I don't think I'll use bootcamp much, will probably go with Parallel.
Here are my thoughts for configuration.
MP 2.93 Octo Memory 36 gig (OWC) 2 x NEC MultiSync 3090WQXi 30' GTX 285
Those are the easy parts. Now I have question about the HD. In general, I want the fastest performance, but DICOM images can be large and I can easily have over 1 TB of data.
I'm thinking Intel SSD 160 x 2 RAID 0 for boot and apps. Then a RAID 0 for data. But am having trouble figuring out the best configuration.
I know I can use the 4 drives + 1 optical bay. That gives me 5 drives. So here are some thoughts.
160 Intel SSD x 2 RAID 0 for apps + short term data 640 gb (from apple) for Windows 2 or 1 TB x 2 in RAID 0 for data
From what I read, windows can't be on a mac RAID 0 array, that's why I'm keeping the 640 gb drive for it.
For best of both worlds (boot + apps + storage) I like the idea of 1TB OCZ Colossus, but the cost is high and it's not out yet.
If 2 SSD is an overkill, then perhaps a Intel SSD 160 for boot/app and a 3 drive RAID 0 for data?
Backup will be external since I've run out of internal SATA ports. I figure I can go with slow Firewire or USB, but an eSATA card (Sonnet E4P PCI-Express card) will probably work better. There should be enough PCI space with both GTX 285 and GT120 installed right?
I have been reading the postings on RAID cards (Areca 1210?), but I'm getting lost and don't know if that will help in my situation
im new to Mac and stick in a problem that cant solve it,and i need consulti work for a company that try to create a package that consist most popular Mac Application such as ILife,IWork,etc.This package is for Internal use and must have security layers on it that protect the DVD's from copying,Imaging and some thing like this.i want to do it by software and software locks but i dont know what can i do coz i dont know how to do it in Mac.
I am going to upgrade about 70 MBP's running leopard to Snow Leopard. We image with a Mac OS server, but these upgrades will not be fresh wipes/installs. we will just be upgrading their OS's. Can I use the mac server to do this? I have ARD software as well. Can I somehow place the image of software on the mac os Server (running Snow) and push out to the MBP's? Any tips or hints would be great. Upgrading machines from tiger to snow
I am using Disk Utility on a mac vr. 10.3.5 and when Im trying to mount the image on another computer by using restore I receive the error 16 and I dont know what is wrong. I am using OSX and on a e-mac if that helps.
Just got a WD My Book World Edition II 2TB. I would like to reformat this drive specifically for mac. It's sole purpose is to be used with Time Machine.
I currently have the drive connected to my IMAC via ethernet. Finder shows the external HD listed under Shared as MyBookWorld and another one as MyBookWorld-Backup. Time Machine preferences/select disk shows this drive as "WD_Backup on MyBookWorld-Backup".
Using DiskUtility.app the drive DOES NOT show up!
Should I send this drive back from where I ordered? Anyone have any experience with this drive? Should I even bother to reformat?
I have NOT installed the software that came with the drive? Why should I?
Finding an effective way to transfer old VHS videos to my Mac with Yosemite so that I can burn them to DVDs. These are so important to me as they include videos of my three children from birth until the age of DVDs. There is NOTHING out there that I can find that will work. The "Debut" program available online for free does not clarify whether it will work with a Mac or with Yosemite.
Info: iMac (21.5-inch Mid 2011), OS X Yosemite (10.10.1), Roxio VHS to DVD for Mac
I have the latest Acronis Backup and Recovery v10 boot cd.. i was hoping to use this to backup the out of the box macbook pro we just received..
It did show 2 partitions, one with about 239GB and 0 bytes free.. i had not gone through the setup wizard as of yet.
It is moving along as far as taking the image, but i'm not sure if this is safe to revert to or not..
Does anyone know?
(new to macbooks)..
Secondly, we will have bootcamp installed soon, with windows on that partition.. ideally we need to be able to backup via image the entire harddrive and revert to previous images as needed..
Hoping the bootable Acrnois is the answer..
However, i did read that Carbon Copy can be used.. does this backup bootcamp/windows partitions too.. will it create a bootable cd option or bootmenu option to restore?
Anyone know of any good document imaging software? I am looking for something that can scan a document and then use a database to retrieve the information. I really don't want to store scans and then use spot light to retrieve them.
