IMac :: Use As Monitor Without Turning Entire Hardware On?
Apr 13, 2010
I've never owned an imac since I don't care for the AIO concept due to the fact that when your computer becomes obsolete, you lose the monitor as well, without any good reason. I really need a new computer, and as usual I'm thinking about the mini. The problem is that they are really slow and I need the hardware of the imac. I figured that buying an AIO, isn't that bad if you can still use the monitor even when the computer's hardware is obsolete. I've summed it up to a couple of questions:
1. Can you use the imac as a monitor for another computer without turning the enitre hardware on? Perhaps you can easily mod it, so that the monitor is the only thing working.
2. As a follow-up question, if something goes wrong with the imac, that isn't related to the monitor directly (i.e cpu, ram, hdd, etc..), could you still use it as a monitor for another computer?
If the answers to those questions are positive, I'll probably get a 27" imac.
I have a first gen iMac 24 Intel with a dead logic board. However everything works in it. The screen, power supply, isite, speakers. appear to work fine. I got a MacBook Pro to replace it and I wanted to know if there is a way to turn the old iMac into something that is more like the Apple 24� display, even if I need to do electronics work in it.
I am in IT and have access to a lot of dead stuff I can scavenge for parts. I am also an electronic technician, so I should be able to do this. I just don�t know what I need to do.
Hunting down info on this topic has come with that there are controller issues. If I can pull a controller out of another dead LCD display that I happen to have, I can see it working. I can even see the possibility of adding the electronics from a USB hub to pipe USB functions over a DVI cable. And get the iSite and speakers working.
I'm looking to turn my new macbook pro into an external mimic monitor for my new imac. ...like, so that I can move my mouse from the imac screen to the pro's screen. How do I do it? Is it possible to do it wireless?
I have 4 vertical stripes across the entire height of my monitor, the stripes are there even before I log on. My 17" imac is 6 years old. Do I have to buy a new computer?
I've run into a very nasty problem with my macbook (late 2007 normal macbook model I think). Whenever it closes, the monitor goes black. This is normal. What isn't normal is this: whenever I open it and then either start it/awaken it, it gives me the screen... and then the monitor turns the brightness off again! This happens randomly, I have to close and open my screen quite a few times to get it to work-even if I restart the computer. I don't what's causing this, or how to fix it, although I have a hunch that it's the hinge on the back; it started shortly (but not directly) after I replaced my CD drive... I have the tools and instructions needed to open my machine up if it's a fairly simple fix, but I need to know what's going on first.
Why is my ADC monitor not turning on after I put my G5 to sleep? I am running an adaptor to my G5 from the ADC monitor (DVI to ADC).The screen usually runs fine when I reset the monitor or turn it off but as for when I put it to sleep, no such luck..This has happened once before and last time I just waited and randomly turned it on a couple days later and boom, the screen booted up.I have tried basic options, like resetting the computer several times, pulling the power cable out of the G5 for several minutes and even a PRAM reset but nothing seems to have made it work as of yet.I assume it's within the G5 as it has happened a few times and the monitor works fine when I test it on other computers..Also as I mentioned before this is not the first time it occured and it just randomly seems to come on whenever.
Info: ADC Monitor and G5 Power PC, Mac OS X (10.7.3)
As the title asks, really. Is it safer for an iMac to be shut down from a power cut whilst turned on, or whilst sleeping? We tend to get a power cut once every couple of months.
I connected my Samsung syncmaster 215TW with macbook - via minidisplay port reduction to DVI. when I turn the monitor verticaly, nothing happens... do I have to install some aditional software to my macbook?
My 2006 mMcBook is dead and parted out. I still have the case and screen, but no HD, RAM, battery, or working logic board. How can I take the screen and make myself an external monitor out of it? I am presuming it's possible. I can solder a little and I love messing with parts from radio shack. So, has anyone heard of this? I tried googling it but couldn't find any search terms that brought me what I wanted.
Basically, I want to convert the video cable to DVI or even better, Display Port, and then figure out how to solder in a power source to just plug into a wall (since I'm assuming it'd be too big of a job to have it powered off of the FW800 or USB from the macbook pro). Is this possible? Since the computer is dead and gone, it won't hurt to experiment. Anyone have any links or guides to this?
my screen cracked on my MacBook and I'm unable to see anything (it's just fuzzy white) so I purchased the VGA adaptor so I can connect to an external monitor. When I plug in the screen is zoomed to close and I can not view the entire screen. I can see one application that I have open, which is iMovie but can not see the top menu or my icons at the bottom. How can I adjust the settings seeing how I can not access the menu bar or anything else for that matter. It also appears to be showing a second screen, maybe not my desktop because the background is different. I'm running on OS X Lion. Â
I'm trying to finish an end of the year slide show for my kindergartner that I need completed today, I was five minutes away from finalizing then my two year old threw his monster truck at my screen!
1 going mini display port to DVI adapter to DVI on 19" Monitor (standard monitor)
1 going mini DVI to DVI adapter to a DVI to HDMI on 52" LCD (Samsung TV)
i just sold me iMac and switched to the Mini not only to be able to hide the Mini which i couldn't do with the iMac but also when i watch a movie full screen on the 52 i was never able to turn off the iMac monitor and would have to cover it with a towel so that it was dark in the room except for the 52 showing the movie.
my thought was that with 2 monitors separately hooked up to the Mini that i could solve the turning off the second monitor problem as they would now both have power buttons. besides making it dark in the room i also like to have the monitor off and so that i can have Plex on the 52 always in full screen mode so my wife can just hit "Watch Plex" on the logitech remote and the TV and Stereo switch to the proper inputs and away she goes to watch whatever without having to touch the computer which when both monitors are on works perfectly.
I just got my Sammy HDTV/Monitor, which is a 23" 1080p HDTV. However, when I connect my MBP via my mini-displayport to HDMI adapter, the screen gets cut off on the top and the bottom. I have tried to switch the resolutions from 1080p to 720p, but it still does the same thing. It gets off both when I use the external as a secondary monitor and when I mirror the displays and use it as a primary monitor. When I turn overscan off in System Prefs, the 1080p image shrinks and there are black bars around all sides (however, it does show the entire screen). Does anyone know how to fix this? I want to get the most out of my recent purchase, and I know this is possible because I've seen it.
My 20inch Imac which is running Snow Leopard and has been running fine for a long time now. It has just started to turn it self off then re start up on its own about 1 or 2 minutes later and then some times I just can't get it to turn back on again. I think it could be the psu?
I am new here, I joined your forums to ask for some advice! I hope I'm in the right section!
Ok, so I own a MacBook Pro for the past 3 years. The thing is that, since I mix and produce music on a daily basis, I would have liked to have a stationary Mac so I decided to buy an iMac.
I have a lot of softwares installed, along with VSTs, many files, and in general many heavy interface modifications, that involve third-party programs like CandyBar, black menubar, GeekTool etc etc (to make it a more cozy enviroment to work in, 15 hours a day!) so it would be a HUGE hassle to buy the iMac and reinstall everything, I do not physically have the time to do that. Now I read in an Apple article that Time Machine "allows the user to restore the whole system, multiple files, or a single file." So my question is:
So would it be possible to just transfer the whole system to my new iMac, to be basically like opening my MacBook Pro, just like any other day? I'm mostly worried about reinstalling softwares that my college gave me (therefore, I don't have the installation DVDs) or not being able to recognize the licences anymore (I could fix that, but still), and if possible, keeping all modifications I've done on my MacBook Pro.
Would a good 2nd option be to take my MacBook on an Apple Retail Store and maybe they could do it for me? I think, when I asked 2 years ago, they said that they could, but maybe he was referring that they could just backup my files, I don't really remember.So yes, this is it! Any advice and suggestions would be welcome!
I was surprised one day to find an inch of white line running from top to bottom on my screen. Then after a week it expanded to two inches white line, then suddenly it turned all black and I can't see two inches of my screen from the right edge. I was reading some forums and found out that I can use a dell monitor as a secondary monitor, but is it possible to use the dell monitor as the primary monitor in case the black line will spread throughout the entire iMac screen? so the iMac would serve as a stand alone processor like a regular desktop?
I have an iMac G3 which I am VNC'ing in. Its never going to be turned off, and I am never going to look at the screen, so how do I turn it off? I Want to save the CRT, and its not needed. I Know there's a way to actually turn off my MBP's Screen.
2010 is a big year for me with my iphone 3g contract to expire in july, which means i can finally grab a slice of the fourth Gen Iphone, and my first bite into a Imac computer. Being a long time PC vista user 3 unfortunate years I'am tired of the windows world, yesterday I went to JB HI FI and i got quoted for $3,450.00 AU for an IMAC 27 Inch model which is orginally $3,626.00 AU. with i7 2.8ghz processor 8gigs of ram extended warranty and ms office
I'am holding off till tuesday to wait for WWDC to see if there is any news on Imacs. If there isn't I assume that it will be a quiet update, should i wait for the quiet update or buy one after the conference blows over.
The noise starts immediately after hitting the start button and continues as long as the computer is running.It sounds similar to fan blades rubbing on something. This started while I was using the computer.
People iMacs are turning off. This has been happening to mine for months.Â
I have 24GB of RAM. I expanded it with memory from Crucial's website when I first got it. This problem seems to be getting worse. I come back to my computer to find that it has restarted itself. Â
The iMac is running OS X 10.8.5. The model identifier is iMac13,2.Â
Info: iMac, OS X Mountain Lion (10.8.5), 24GB RAM 2.9 GHz i5
I feel a bit silly, but I've not been able to turn off the tone that happens after I turn on my iMac. I've got the volume turned all the way down at the speaker icon, top right of screen
I have a 24" 2007 iMac, the first aluminum ones, 4Gb of Ram and a recently upgraded HD to 1Tb (from a 320Gb failed drive). Recently, I have noticed that under some active usage, such as playing World of Warcraft or Excel, the screen will start to turn completely off for 10 seconds, and then back on for 10 seconds. It will continue to do this for about 3 hours, turning on and off every few seconds or 15 seconds. It will mostly turn completely dark but would also sometimes flicker. The curious thing, is that if I continue to keep playing, the screen would cease doing this after about 3 hours and then be completely normal and fine, but the next night.
The symptoms would repeat itself, and would consistently go away after active usage (3 hours or so). Imagine this, as if the iMac itself needs to be "warmed up" for 3 hours before normal usage. It would also appear that if I hit the machine (or tap it), this may sometimes bring a dark screen back to life for a few seconds. I plan to bring it to support, but I just want to get some ideas from you guys as to what this can possibly be.
Some of my guesses: 1) It cannot be software as physically hitting it or my dog barking would affect the rate and speed of the random turn Ons and Offs. 2) It could be a loose connector from my recent transportation of it while upgrading my HD, but then why would it become normal after 3 hours of usage? 3) Maybe something to do with RAM or video RAM? It is faulty, and thus only prolong heavy usage would "run it in" for the session? After not using it for a while, it goes back to its failed state?
I tried googling this right after I bought my new iMac (on black friday). There is a little switch at the bottom of the magic mouse for turning it on/off. My question is every time I turn off my computer should I switch the button to the off position? Is there any benefit from leaving it on/off?
Whenever I need to shut my computer down from the apple menu it hangs. It does the same thing whenever I try to restart it. It's annoying. The only way I can get results is to physically shut it off.
Info: iMac, Mac OS X (10.7.2), 3.06 Ghz Intel Core Duo
Windows user here that just ordered a 27" QuadCore iMac. Usually on my PC at home, whenever i'm not using it I turn off the monitor but leave the computer itself running most of the time (I run a lot of torrents, VNC, etc). Is there a way to turn off only the display and keep the computer running like I normally would on the PC?
I have my iMac connected to my wireless router via ethernet, but also airport is on. At the top right I can see I am connected to my network. How can I chose the faster ethernet to connect without turning of airport? How can I be sure the connection is with ethernet and not wireless?
Working in Excel today, I was highlighting groups of cells with color when the entire screen suddenly had a pale grey-green tint. Can still see colors beneath, but everything tinted (not just the Excel window, but the entire display). White, of course, is most dramatic. The Dell monitor beside it is fine.Â
I've recalibrated color a half dozen times (have always had to do that to get the Dell and iMac screens as similar as possible). It's impossible to get white on the Mac. Rebooted several times, including hard boot, zapped the PRam, ran Permissions Repair and Disk Repair from the startup CD. Installed Temperature Monitor to see if there's a heat problem, but I could not find normal temp values anywhere on the Web, so that was something of a bust. Temps attached below in case there's an educated set of eyes out there....Â
Ran some online tests, too, for color distortion, dead pixels, that kind of thing, but nothing reveled.Â
I've been all over the Web looking for some guidelines, but most posts at apple and elsewhere seem to focus on later-model iMacs with the yellow lower screen problem when new (It's not that) or panic screens of wild colors, stripes, and the like. This is just a grey-green tint that covers the entire screen, rendering whites grey-green and colors muddy.