IMac :: Reducing Resolution From 30"?
Aug 5, 2010
Apple sliced off a bunch of the vertical resolution compared to the 30" Apple Cinema Display.
ACD 30" = 2560x1600
iMac 27" = 2560x1440
Not really a huge deal. I think they did it to make it true 16:9.
I'm just posting this because this somehow slipped past my notice. I'm one of the people demoted from Mac Pro to iMac and now I am sort of wishing I could still use my 30". (I don't have space to use both.)
Not really a big deal. Just an FYI.
Yeah, I know it's my fault for not paying attention. I probably still would have went with the iMac 27" anyway.
View 3 Replies
ADVERTISEMENT
Apr 18, 2010
How can i reduce the depth (20.7cm) of the 27"iMac? I have a small desk with only 70cm depth and im afraid that i will be sitting too close to the huge 27"iMac display that im about to purchase.
View 13 Replies
View Related
Apr 26, 2009
I just got my new 24 2.8 imac to replace my original first gen intel 17 imac.
It seems wonderful, screen speed etc.
Only concern I have is that it feels awfully hot, especially upper left corner, not just the frame but also the screen itself.
Is that normal and expected?
My first generation imac with the Merom is basically cold compared to this one.
View 5 Replies
View Related
Mar 21, 2010
My old 24" iMac had an ATI radeon 4850 card, and playing some of my favorite game titles (fallout 3, and Dawn of War) worked fine - atleast in comparison to my old White iMac 24".
Now I'm going to purchase a 27" i5 iMac with the Radeon 4850 card. My question is; since it�s the same GPU and playing in native resolution will be a tough job. Will the quality of playing games in 1080p be much lower?
I just want to know if this will be a significante downgrade. Or if playing games in 1920x1080 will be a good quality choice.
View 18 Replies
View Related
Mar 21, 2010
I'm a little confused about the resolutions of the iMac 21.5 inch compared the iMac 27 inch.
In terms of watching HD content, which is better, as one is 1080p so it is perfectly formatted for this type of content but the other is higher (2560 by 1440 pixels), will this mean it is better because there are more pixels or worse because it is a different size? I'm a little confused about this. Also is it possible to change the resolution to 1920x1080 on the 27 inch? What will this do exactly? If I were to apply a 1920 x 1080 wallpaper for example to the 27 inch iMac will this look better/worse?
View 5 Replies
View Related
May 14, 2010
So my parents just bought a 21.5" iMac which has replaced their aging PC that came with a CRT(!!). The first thing they noticed was that the resolution is too high. Obviously, lowering this makes everything blurry but of course, no such problem with the CRT where they had nice big text and icons.
Surely there must be a way around this? Some software solution perhaps? They've zoomed in with Safari but that doesn't help the rest of the system and is a real pain to do it for every individual app.
Its understandably difficult for them to understand why something so many years advanced of what they had, can't do something so simple as changing resolutions. I even had a hard time exaplaining that this was an LCD issue, and nothing to do with a mac.
View 5 Replies
View Related
Jun 6, 2010
I have and iMac on the way. Been using dual monitors for years with other operating systems. The second monitor I have is a 22" Planar PL2210MW that will do 1680x1050. The iMac is the 21.5" with the ATI Radeon HD 4670, 1TB drive, 3.06ghz Dual core.
View 2 Replies
View Related
Nov 16, 2010
1440x900 resolution of the new MacBook Air 13.3" screen is simply too high, making everything way too small and straining on my eyes. Is there a replacement LED LCD panel with a lower resolution (1280x800 like the old MBA) that could be retrofitted?
View 24 Replies
View Related
Apr 29, 2010
It is clear there are people who love their high-res antiglare display; the ability to have more pallets open in Photoshop, see more of what you are doing in Logic. However, there is a fair few of us who dislike the high-res because of decreased fonts, smaller graphical interface things.if you had the choice to go for a high-res or normal res antiglare 15", what would you go for?
View 13 Replies
View Related
Dec 31, 2010
My iMac screen resolution only has a problem with the admin account. When I log in as a guest account - the resolution is as it should be at 1680 x 1050 - but when the admin account is logged in, that same resolution - 1680 x 1050 is slightly expanded by the screen size. I can click on the edges of the screen and bring back the menus to do what I need to do.
View 3 Replies
View Related
Jan 24, 2009
So I tried to set up bootcamp on my 10.5.6 17" iMac. the windows installation failed because of a bad disc so I restored my computer using my OS X disc and time machine. Now my display in OS X is being forced to 1024x768 and I cannot change it to anything else. It looks terrible and there are some artifacts... Any idea what the heck happened?
View 6 Replies
View Related
Mar 3, 2009
Have I missed something, or has the "new" iMac's 24" screen been reduced in resolution?
Update: Looks like their res info has been wrongly entered if one scrolls down on this page: [URL]
Going to the "Compare" page shows the higher res spec.
View 2 Replies
View Related
Sep 10, 2009
Which will perform better on wow or any game, an imac 20inch or 24inch with the same spec of 2.66ghz 9400m 4gb memory?
They're both are almost identical but the native resolutions are different.I'm comparing a 20inch imac resolution 1680by1050 to a 24inch 1920by1200.
So I'm guessing the 9400m will do better on a 20inch imac right?
Since the 9400m is not all that powerful so I'm guessing it can't do well on the 1920by1200 when gaming ?
View 2 Replies
View Related
Feb 2, 2010
I would really like to be able to select a 4:3 resolution like 1600x1200 in Windows XP and for it to work with pillarboxes on the side, like it does in OSX. Instead of stretching it out to fill the full screen. I have tried going into the advanced options for the video card and trying out each resolution at different refresh rates, but the result remains the same.
BTW...if it makes any difference I am using windows xp professional with service pack three and my video card is an Radeon HD4850.
View 3 Replies
View Related
Mar 29, 2010
Question: How can I set the resolution of each display individually? Details below:I have the new iMac 21" and an LG W2252 display from my old PC. I'm a newly converted mac user. I connected it to the imac and it worked. But the resolution is horrible. I can change the resolution when the displays are mirrored. But then when I uncheck mirror the resolution for each display cannot be changed individually. The LG goes out of range and won't show anything until I bring the resolution down and mirror the imac. Is this problem with the LG or the mac?
View 5 Replies
View Related
Aug 12, 2010
I got my first mac yesterday. iMac quad core i5.
I was wondering if there was any where to test the resolution of the screen e.g full HD videos to see the true quality of the screen?
View 2 Replies
View Related
Nov 7, 2010
I have the 1st Gen 13" Macbook Unibody Aluminum. I upgraded my ram to 4GB.
But...
Whenever I watch youtube/flash videos on full screen or play even games like Counter Strike on lowest settings. My Macbook heats up like crazy.
Any reason know why this may be the case?
View 11 Replies
View Related
Apr 11, 2008
I left my mba open, with the screen saver on, not running any programs for about 2 hours. Came back and the fan is at 6200rpm and the CPU temp is 180 degrees. It hasnt been doing anything at all. I dont understand why it is working so hard. What should I do?
View 12 Replies
View Related
May 5, 2010
i am using a hackintosh for a week now. I am using it just to get used to Mac OS X because i am switching to a Macbook Pro in a couple months. I switched from PC to Mac officially now. OK, let's come to the main topic of this thread;-At first, my hackintosh couldn't get my gfx card, i couldn't find the driver(kext) so my resolution was very bad. Everything was huge and blurry. I couldn't even look at my 17" Samsung LCD screen. I made an entry to file which was something like this
View 14 Replies
View Related
May 6, 2010
Who has actually played games on BOTH the 2010 high res and standard res macbook pros?Reading through that gaming benchmark thread isn't much of an indicator as most people don't post their resolution and if they have they have only played on one or the other.Im trying to get a better indicator on the performance difference with newer games. Are we talking 2-6 fps drop or 10-20 or more?
View 17 Replies
View Related
Jun 10, 2010
For those who would like to try adapt to hi-res screen of the 15'' but the not sure if they can, if they can't adapt to the hi-res, it's possible to set the resolution to 1440x900 with no appearence differences from the standard res screens?So the appearence and quality of the hi-res screen set to 1440x900 is the same of the standard res screen?
View 4 Replies
View Related
Aug 17, 2010
So i'm trying to figure out the best resolution for using my macbook pro in clamshell mode. I think ever since i installed snow leopard the new resolution choices i have are not longer pixel x pixel, but actual TV resolutions, such as 1080i, 720p, 420p. In the past I've used SwitchResX to do custom resolutions for my tv but that dosnt seem to work anymore.
I'm trying to find a resolution where text is easy to read. 1080i looks pretty but text is extremely small. 720p the text is larger and easy to see but is very fuzzy and not easy on the eyes. I guess this has something to do with the pixels on a tv being farther apart than that of a computer monitor. It's a 32" LCD TV. I'm using a DVI to HDMI cable (Non-Unibody Macbook Pro).
View 5 Replies
View Related
Jan 5, 2011
I got screen sharing to work on my local network... so I can connect to my 27" iMac from 13" MBP.ution is just too much for my MBP to handle.Is there a way to automatically adjust the resolution on my iMac when I initiate screen share, and automatically turn it back to native resolution when I stop close screen share?
View 3 Replies
View Related
Oct 3, 2006
what i intend to do is have my imac g5 and my peecee (pc ) on the same desk, but of course i cannot use the imac display, so i will use an extra display and use a KVM switch, my question is; Will the extra screen need to be the same resolution as the imac using ssd?
View 4 Replies
View Related
Mar 10, 2009
Does anyone feel like the default text size in all applications is too small when your imac is set at it's best resolution?? I really hate to compromise some of the display quality by decreasing the resolution, but everything seems so small!!! I really hoped on a nice big screen i could look at things larger than I could on my laptop!! Is there anything I can do about this? I am new to Mac, so maybe I am just missing something.
View 5 Replies
View Related
Jul 26, 2009
We are having a hard time with our screen resolution on ouf 20" IMAC..Tried several today but could not get a good screen.
Those of you that have a 20" IMAC send me what you think is best.
View 1 Replies
View Related
Nov 2, 2009
What's the ideal viewing distance with the new iMac considering resolution? Can anyone post their desk setup or suggest a distance based on home theatre rules...
View 9 Replies
View Related
Apr 13, 2010
I was waiting to buy a new Macbook Pro but as soon as they were released today I said "meh" and decided maybe I should buy a brand new iMac and keep my Early 08 MBP. I want to get a new Mac in preparation for the upcoming launch of Steam on OS X and just because mine is long in the tooth for Windows gaming.
Anyways... I just had a thought and was wondering if any owners could clear it up. The resolution on the 27 i7 Quad Core seems ENORMOUS for a middle-grade ATI GPU. Are you able to game on high settings for semi-modern games like L4D2, TF2, etc. at the 27"'s native resolution? What are your thoughts on it as a gaming machine. It seems like the 27" will obsolete itself quicker than a i5/i7 21 inch (if one ever comes out) due to the screen resolution size.
View 24 Replies
View Related
Dec 5, 2014
I have an iMac 5K connected to a second monitor (HP ZR2740W) via mini DisplayPort to DVI adapter. In Displays prefs, I can only select resolutions of Best for Display or Scaled-1280x720 (which doesn't change anything.) I'd like to be able to change to a higher resolution.
Info:
iMac with Retina 5K display, OS X Yosemite (10.10.1)
View 1 Replies
View Related
Dec 10, 2014
I am running into an issue that the screen resolution of my imac keeps resetting to scaled 1600*900. I can use system preferences to change this to 1080p but every time I restart the computer it is back to 1600*900.
I have tried clearing the PRAM, but it has not worked.
Info:
iMac, It is not OS specific
View 1 Replies
View Related
