iMac won't start up after failed upgrade install, all I have is a folder in the middle of my screen. And it won't allow me to reinstall my restore discs....
Info:
iMac, Mac OS X (10.4.11)
I tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
So I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo
now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?
My iMac (27", late 2013, Yosemite) starts using the power button. A black screen, white Apple logo and progress bar appear. When progress is at ca. 50% the computer powers off.
Info:
iMac, OS X Yosemite (10.10.1)
I just want to let you know that I am really thankful for your help.
This is a 3-year old iMac version 10.4.11
I upgraded Safari as recommended a few days ago, and since then, Safari has not worked at all. At the same time, I was warned that my startup disk was full. Following the advice from some other mac help sites, I cleared the copies of my iTunes library to free space. I now have 6.72 Gigs of free space on my hard drive, but my computer is still running super slow. Just about every other thing I click on in Firefox gives me the rainbow wheel.
I ran Techtools and everything passed but the Directory Scan and Volume Structure.
As soon as a friend can loan me a hard drive, I was planning on backing up everything and re-installing. Is this the best thing to do, or is there something else to try first?
I recently received an iMac as a "gift"... turns out it has some problems. I am unable to reinstall the default OS (Mountain Lion) because I have yet to be able to partition the HDD correctly. The error I keep getting is: Partition failed with the error: Wiping volume data to prevent future accidental probing failed.At this point, the default Macintosh HD isn't showing, so it must of been erased/deleted.
Info:
iMac
I had a MBP(13-inch Mid 2012), and I upgraded my hard drive to a Sandisk Extrem II 256GB SSD by replacing the Optical Drive. But unfortunately, when I tried to start up, the following pics appeared, When I boot up the computer by pressing the power button, there were 3 unexpected things happened: the "Forbidden" icon showed, and a few seconds later, it changes to the "Apple" icon quickly and changes back to "Forbidden" immediately, this situation would repeat in about 10 minutes or more(up to 30 minutes or an hour, it depends). When the Apple icon showing with the loading indicator, after a long time waiting ,the system boot up successfully. the "Apple" icon came up, and the the loading indicator came also. what could I did is just waiting. the system boot up failed and an expected error occurred. something just like the situation One, but after the waiting, the Diagnostic model appeared or an common error known as "5-Country Languages". After I restart the mac , the alternative situation above repeated.
View 5 Replies View Related one of my Al Powerbooks decided to kernel panic twice in the past two days and both times fail to start up afterwards. The symptoms would be that when I pushed the power button, I wouldn't hear the Apple startup sound and it would just sit there.
Well, after a few tries and some sadness, I decided to remove the PRAM battery card and voila, computer boots up perfectly! This has actually happened twice (removed PRAM card, booted up, then put PRAM card back in, then eventually exact same situation occurred again), does anyone know if a PRAM battery card can possibly wreak suck havok on a G4 running Leopard.
I am upgrading to 8GB in myMac mini. I did the trouble shooting( command, option P,R) thing after getting 3 beeps but it didn't work. So I tried one 1GB plus one 4GB to total 5GB and it booted.
How can I get 8GB to work? Why does 5GB work and 8GB not work?
Info:
Mac mini, Mac OS X (10.7.3), 2011
Just upgraded to Mavericks and have all current updates - went to open mail and got the following message:
Mail failed to import.
An error occurred during the import. Make sure you have available space in your home folder and try again.
I have a pretty "clean" Macbook Air - not much on it so can't imagine I'm anywhere close to not having available space.
Not sure if you can help on this or not. I bought an ibook g3 that was running 10.2 and went ahead and got 10.4 discs for it. I went ahead and began the install.I got to disc 2 and it messed up. Now each time I boot the ibook it wants disc 2, when I give it disc 2, it gets to disc 3 and messes up again and can't get passed it. Is there any way I can completely restart the install process or roll back to 10.2?
View 1 Replies View RelatedI tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies View RelatedI'm installing 10.5.6 on the family MacBook (white) and it was running 10.5.4 previously, yet hanged when I was updating everything (there was a few updates) so I had to force power off. The Mac says it is running 10.5.6, but I wanted to apply the combo update to be safe. However, it fails when installing (it doesn't get to the stage where it reboots, still in OS X at this stage). It says "The installer could not install some files in "/". Also, repairing Disk Permissions failed too. Prior to the update, everything was working fine - I'm usually full of ideas, but when it is your Mac that is playing up I'm very keen to hear what others have to say.
View 2 Replies View RelatedI'm installing Windows 7 64-BIT on Boot Camp, I selected an unused partition, selected the option "Create a second partition for windows", set it's space to 131GB, inserted my DVD, which boot camp accepted, restarted, loading the windows installer for me automatically, I selected that boot camp partition, I clicked Format on it, after that was done, I click next, and it says "Windows is unable to install on the selected drive" error 0x...... (can't error code). The hard drive I am installing it on will be in slot 2 (it should be, I only have two hard drives).
View 11 Replies View RelatedI've got a Macbook with with Leopard v10.5-something installed. When I installed the latest update and was at about 25% done with the "writing"-part it suddenly failed. I got a message prompting to restart (I think it said that it was something wrong with the source from which it was writing), when I restart the computer I get another message promting me to restart. My backup is a few months old, so I wonder if there is some way around my problem?
View 9 Replies View RelatedI've been around since i bought my iMac 21.5 some months ago.It has been working perfecty, just a very light yellow tinge but it's so small that i can live with it.Now, i updated to Safari 5, it was a bit slow but didn't have any other problems like the ones i've seen here, just a bit slow.Yesterday i was updating to osx 10.6.4, restarted and when it was intalling it prompt a "error" window. I tried again but same results.I decided to do a clean install, (erase and install). So did everything and restarted. When installing it prompt this message "Failed to install, the installer could not copy the necessary support files" Tried i few more times but failed. Right now the iMac is booted with the installer. Can't do anything else.I'm very worried wondering what it is.
View 12 Replies View RelatedAlright, so far I have tried an Upgrade and an A&I and it still fails with that message. I don't know what to do. I have an unusable computer, and the install keeps failing.
View 20 Replies View RelatedA friend of mine somehow ruined his iMac's operating system (tiger) and tried to fresh format his hardrive. He told me that every time he would attempt to install, it would say "install failed" and he would have to restart. I couldn't imagine what he was doing wrong, so I attempted to install tiger on his iMac. OSX failed to install with "erase and install" so I ran disk utility and attempted repair with "failure to unmount".
I also tried erase via disk utility using various formating (journaled etc.). How would I be able to install tiger without error? I am not exactly sure why the installer fails, I am assuming it is something on the hard drive that is preventing install. I don't think it's the disk because the installation disk check proceeded and gave no errors.
I am trying to install windows on my mac. I tried partitioning using bootcamp and told me that the verification failed the , thee disk could not be partitioned, use disk utility to repair this disk. My final place I want to be in is to have windows as my main operating system on my mac. Can somebody help?
Is there a way to clear the hard drive completely also?
After an installation failed to complete (which I Force Quit), nothing else will install. I have OS X Lion and am wondering if there is a way I can remedy this without bringing it into a professional? The program was Cubase 4.
Info:
MacBook Pro
I tried installing a Dynex eSATA II ExpressCard Adapter that I bought at Best Buy. I downloaded the drivers off of the website and tried to install them and got an error message: the following failed: run preflight script for Sil3132 Mac OS X Driver. Contact the software manufacturer for assistance.
View 9 Replies View RelatedI was running 10.5.8 on both my white MacBook and Intel iMac 20," then I finally received the copy of Snow Leopard which I bought from Amazon. I decided to install it on my MacBook first to make sure the install would be successful before I upgraded my iMac, which has my important work stuff on it. The install was a success on the MacBook and after it was fully upgraded and updated, I simply opened "About This Mac" to verify the installation, opened Safari, browsed around for a minute, then proceeded to check out the new dock and airport menu features. After just a few minutes of playing around with it, I decided it was a legitimate installation, closed the MacBook, left it plugged into the power source, and walked to the other room to begin the upgrade onto my iMac. I left home for about an hour and once I had returned, the iMac installation was complete and it was running like a dream. After messing around on the iMac for a little while I decided to make sure the MacBook was still good to go. When I opened the Macbook up, all I saw was a blank screen. I assumed it was some sort of power-saver issue, because sometimes the screen doesn't like to come on right away when I open it up. My first instinct was to move my finger around on the trackpad and press some keyboard keys, which always wakes it up when this happens. Nothing seemed to be working, so at this point I pushed the power button and it proceeded to boot. As it began to boot I heard some sort of CLICKING from the HD, followed by a flashing folder with a question mark on the screen.
I assumed it was some sort of HD failure so I booted to the Snow Leopard install disk, ran Disk Utility and Startup disk, and my Mac COULD NOT FIND the HD - all it showed was the CD-ROM drive and Network Startup. I tried to reboot a few more times and almost gave up. It kept clicking at startup and I was thinking about the little magnetic arms in the HD. I thought they might be jammed in the HD for some reason. At this point, I didn't know what to do. So, as it was booting up again with the plain grey backdrop, as a last resort, pretending I was the Fonz or something, I physically whacked the area on my MacBook near the power button where the sound of the clicks was coming from. AS SOON as I did that, the clicking stopped and a few seconds later the APPLE ICON appeared... instead of that dreaded question mark folder icon! The MacBook started booting up back to it's upgraded self again! Finally I was back at the desktop, and with a sigh of relief, began typing this forum. Now, my question is WHAT THE @#$% HAPPENED?? And how on Earth did smacking it one actually fix it? Is this problem related to the recent installation of Snow Leopard or just my MacBook dying? (It is 2 years old) If anyone has any ideas as to what caused this, and how I can prevent this situation from happening in the future.
This is my first mac; were this a PC I would have fixed everything with flying colors by now. I have a PowerBook G4, 800mhz, that had Panther on it. I bought Leopard and went to install it, using the LeopardAssist program to be able to install it. I'm installing, everything is dandy, then about 10% through I get, "Install Failed". So I reboot and it refuses to reboot, staying at the gray loading screen for all eternity. I rebooted again, this time from the disc. Since Panther seems to have disappeared from my computer, LeopardAssist was no longer available as a program, so while it booted up I went into Firmware and entered the command line manually. But when it starts up, despite having entered (properly, I believe as I saw the "ok" message after each line in Firmware) the hack to run Leopard, it says Unable to install.
To fix the initial failed install problem I ran Disk Utility, but it simply said on verifying permissions, "Error: The underlying task reported failure on exit." So I ran fsck and got the OK and did it again, then rebooted and got the message on disk utility telling me it was "unmountable." Basically I cannot boot from Panther as it were--Panther is not listed when I try to choose where to boot from. And it came with Panther installed, so I don't have that install disk. I think at this point I need to figure out how to get my computer to install Leopard as it was doing; or at least to Verify and Repair the disk on Disk Utility so that I can Archive and Install, which--as it appears in the other forum questions--is the way to go.
Lately, my Lion operating system had become a little buggy, so much so that it eventually wouldn't allow applications like iTunes or safari to open, they would just sit there frozen upon launch. I've had my computer for about 3 1/2 years now and it's accumulated quite a bit of junk over the years, so I wanted to go back and perform a clean install of snow leopard (I'm not sure that I want to go back to using Lion at the moment).I've backed up all my files on an external, and then wiped my hard disk. Now, when I use the white snow leopard install disc, the installation will nearly complete itself and then I get an error saying "Installation failed".I've gone back with disk utility to verify and repair the disk but disk utility told me that there was nothing wrong and that no repairs were needed.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6)
I have Windows 7 running on a separate disk on my Mac Pro.
A Bootcamp drive and System Reserved drive mount in OSX.
Fusion fails to preprocess the bootcamp partion... and it fails to start.
Any suggestions on how to get this working?
My computer will not turn on now, when I start it, it tries to install again and fails.
Info:
MacBook, Mac OS X (10.4)
I purchased the new Mac Box Set with Leopard 10.5.6, iLife '09 and iWork '09.
I was 50/50 on which type of Leopard install I wanted to perform today.
Looks like the disc made the choice for me and performed, what I'm assuming, is the upgrade. All of my files, settings, etc. were intact after the reboot.
I recently tried to install OS X Yosemite. unfortunately during the install my laptop was unplugged and the installation failed mid way through. Each time I start my mac I get to login screen and after logging in get an error message and told to restart and try again - which does not resolve the issue. Guest login do work to the safari screen.
The error message reads: You need to restart your computer. Hold down the power button until it turns off, then Press the power button again. Behind system code, including:
panic(CPU 2 caller 0xffffff 80005418bf):
"process 1 exec of /sbin/launchd failed, errno 45"@/sourcecache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Debugger called: <panic>
Backtrace (CPU 2), Frame: Return Address
0Xffffff80e8423e00 : 0xffffff8000220792
7 more lInes like the one above
BSD process name corresponding to current thread: init
Info:
MacBook Pro (15-inch Late 2011)
I have many questions but few clear answers. What would be the benefits of doing a clean install vs. an upgrade? I have an iMac 8,1 which supposedly is eligible for a 64 bit kernel. Would I have to do a clean install or an "archive and install" to get the 64bit kernel? Also, can someone explain to me exactly what an "archive and install" is/does? From the name, I'd assume it would back up your HDD to an external storage unit, then do a clean install, but I'm probably way wrong.
One more question. If I so happen to choose to do a clean install, would Time Machine be an adequate way to restore all my data after the update? Any help or answers to any of the above questions would truly make my day. You will also be rewarded $1,000,000,000 in Happy FunTime money.
My 2009 mac has been telling me the start up disk is full so I thought to save iphoto and itunes to an external drive. But I have been advised to upgrade the os first as I am still on snow leopard. Before I buy lion (I can't wait for mountain lion) can I upgrade while the start up disk is full? Or will it not let me (it won't do the updates that are coming through at the moment)? If I save iphoto and itunes to the external drive first will I still be able to access them/ properly?
Info:
iMac
