OS X :: Snow Leopard Failed To Install / Graphics Card Failed / System Crashed Had To Reinstall?
Oct 1, 2010
So I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo
now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?
View 3 Replies
ADVERTISEMENT
Sep 11, 2009
I was running 10.5.8 on both my white MacBook and Intel iMac 20," then I finally received the copy of Snow Leopard which I bought from Amazon. I decided to install it on my MacBook first to make sure the install would be successful before I upgraded my iMac, which has my important work stuff on it. The install was a success on the MacBook and after it was fully upgraded and updated, I simply opened "About This Mac" to verify the installation, opened Safari, browsed around for a minute, then proceeded to check out the new dock and airport menu features. After just a few minutes of playing around with it, I decided it was a legitimate installation, closed the MacBook, left it plugged into the power source, and walked to the other room to begin the upgrade onto my iMac. I left home for about an hour and once I had returned, the iMac installation was complete and it was running like a dream. After messing around on the iMac for a little while I decided to make sure the MacBook was still good to go. When I opened the Macbook up, all I saw was a blank screen. I assumed it was some sort of power-saver issue, because sometimes the screen doesn't like to come on right away when I open it up. My first instinct was to move my finger around on the trackpad and press some keyboard keys, which always wakes it up when this happens. Nothing seemed to be working, so at this point I pushed the power button and it proceeded to boot. As it began to boot I heard some sort of CLICKING from the HD, followed by a flashing folder with a question mark on the screen.
I assumed it was some sort of HD failure so I booted to the Snow Leopard install disk, ran Disk Utility and Startup disk, and my Mac COULD NOT FIND the HD - all it showed was the CD-ROM drive and Network Startup. I tried to reboot a few more times and almost gave up. It kept clicking at startup and I was thinking about the little magnetic arms in the HD. I thought they might be jammed in the HD for some reason. At this point, I didn't know what to do. So, as it was booting up again with the plain grey backdrop, as a last resort, pretending I was the Fonz or something, I physically whacked the area on my MacBook near the power button where the sound of the clicks was coming from. AS SOON as I did that, the clicking stopped and a few seconds later the APPLE ICON appeared... instead of that dreaded question mark folder icon! The MacBook started booting up back to it's upgraded self again! Finally I was back at the desktop, and with a sigh of relief, began typing this forum. Now, my question is WHAT THE @#$% HAPPENED?? And how on Earth did smacking it one actually fix it? Is this problem related to the recent installation of Snow Leopard or just my MacBook dying? (It is 2 years old) If anyone has any ideas as to what caused this, and how I can prevent this situation from happening in the future.
View 4 Replies
View Related
Apr 20, 2012
My computer will not turn on now, when I start it, it tries to install again and fails.
Info:
MacBook, Mac OS X (10.4)
View 2 Replies
View Related
Feb 27, 2012
Lately, my Lion operating system had become a little buggy, so much so that it eventually wouldn't allow applications like iTunes or safari to open, they would just sit there frozen upon launch. I've had my computer for about 3 1/2 years now and it's accumulated quite a bit of junk over the years, so I wanted to go back and perform a clean install of snow leopard (I'm not sure that I want to go back to using Lion at the moment).I've backed up all my files on an external, and then wiped my hard disk. Now, when I use the white snow leopard install disc, the installation will nearly complete itself and then I get an error saying "Installation failed".I've gone back with disk utility to verify and repair the disk but disk utility told me that there was nothing wrong and that no repairs were needed.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6)
View 2 Replies
View Related
Mar 16, 2009
I tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
View 4 Replies
View Related
Jan 17, 2009
This is my first mac; were this a PC I would have fixed everything with flying colors by now. I have a PowerBook G4, 800mhz, that had Panther on it. I bought Leopard and went to install it, using the LeopardAssist program to be able to install it. I'm installing, everything is dandy, then about 10% through I get, "Install Failed". So I reboot and it refuses to reboot, staying at the gray loading screen for all eternity. I rebooted again, this time from the disc. Since Panther seems to have disappeared from my computer, LeopardAssist was no longer available as a program, so while it booted up I went into Firmware and entered the command line manually. But when it starts up, despite having entered (properly, I believe as I saw the "ok" message after each line in Firmware) the hack to run Leopard, it says Unable to install.
To fix the initial failed install problem I ran Disk Utility, but it simply said on verifying permissions, "Error: The underlying task reported failure on exit." So I ran fsck and got the OK and did it again, then rebooted and got the message on disk utility telling me it was "unmountable." Basically I cannot boot from Panther as it were--Panther is not listed when I try to choose where to boot from. And it came with Panther installed, so I don't have that install disk. I think at this point I need to figure out how to get my computer to install Leopard as it was doing; or at least to Verify and Repair the disk on Disk Utility so that I can Archive and Install, which--as it appears in the other forum questions--is the way to go.
View 2 Replies
View Related
May 1, 2012
Having tried to initiate a hardware test by inserting a Mac pro system disk and holding the "D" key down, I lost my usb sockets on the rear of the machine so the sysem hung trying to find the mouse and keyboard.
I managed to break out of this loop by connecting both to the front usb sockets and the machine is running as before. Is this permanent damage or is are the rear usb's retrievable ??
Info:
Mac Pro, Mac OS X (10.6.3), 3.0 dual with 4 gig ram
View 1 Replies
View Related
May 15, 2012
I have a desktop Mac that I used Migration Assistant to transfer my user setting etc. prior to selling my MacBook. All works well, except that everytime I try to print a document it pauses while looking for a shared network volume for a while before coming back saying "Connection Failed to MacBook". I deleted all printers and resent printers from preferences to add them back manually and repaired permissions however the problem is still happening everytime I try to print a document. Its as though its looking for the old MacBook.
Info:iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
Mar 15, 2012
This is the third drive that has failed since I was assigned this Mac Pro at work a few weeks ago, and the drive was purchased less than a week ago. The other two were older drives. They would suddenly stop being readable. Sometimes there was a problem ejecting the drive before it stopped becomeing readable (message would say the drive couldn't be ejected because another program is using it, when there were no programs open). One of them eventually mounted again and I recovered some of the files (but some files weren't readable when I tried to copy them). But that was just luck as they all seem now to be consistently unreadable. When I plug them in I get the message: "The disk you inserted was not readable by this computer". same if I plug it into a different computer. And when I try to repair, it shows this: http://i.imgur.com/ivK9d.png. When it happed to the second drive, I just thought it was a fluke... but now a third, brand new drive? Something about the computer must be causing it.
View 14 Replies
View Related
May 18, 2012
Had hd failure, replaced drive, restored time machine BU. Bu completed successfully. Most programs fail immediately.Â
Info:
MacBook Pro, Mac OS X (10.6.8)
View 3 Replies
View Related
Jun 2, 2012
I lost the main HDD on my Mac G5 running Panther 10.4. I have a TM back up onto an external drive and bought a new internal drive.How do I restore all my files from the external back up to the new internal HDD so I can run my computer as it was.
Info:
Power PC G5, Mac OS X (10.4.10)
View 6 Replies
View Related
Jul 2, 2012
After multiple updates failed to install on a restart, including a security and Safari update, many applications on my mac do not work.I am receiving error messages such as this: [code] This leads me to believe that multiple frameworks went missing in the failed update; looking in the frameworks folder, the only ones there are iTunesLibrary.framework, NyxAudioAnalysis.framework, and PluginManager.framework. Where can I download these missing framework/fix the problem if there is more too it than that? Finder, system profiler, system preferences all work. Activity monitor shows everything as normal.
Info:
MacBook, Mac OS X (10.6.8), Model Identifier: MacBook1,1
View 4 Replies
View Related
Oct 23, 2010
I just tried to update my 2008 Macbook from Leopard to Snow Leopard. Install went fine but all of the sudden I got an error message, accompanied big yellow triangle with a black exclamation mark telling me that the install has failed without any further info. I rebooted and Snow Leopard was trying to install again. I thought 'why not' and continued. Then, when I had to pick a disk to install on, my Macbook harddrive couldn't be found. I thought 'screw this I'll stick to Leopard' and rebooted. After that it just stuck on the grey screen with the Apple and the loading animation. How I can fix this or at least save my files?
View 3 Replies
View Related
Sep 12, 2009
I have one of every type of the newest Macs: MacBook, MacBook Pro, MacBook Air, iMac, Mac mini, Mac Pro. Since upgrading them to Snow Leopard, none of them will connect to any wireless network -- regardless of the router (AirPort, Linksys, Cisco, etc.) and regardless of the type of security (open, WEP, WPA, etc.).
Every time I attempt to connect, I get the message that the "connection failed." Here's a 20 second screen recording of what's happening.
View 2 Replies
View Related
Nov 21, 2009
I have a white MacBook. I tried to update my 10.5.8 Leopard installation to Snow Leopard with the upgrade DVD I just got. Unfortunately, update failed on me. After being noticed by the installer that the update failed, I ended up with a NON-BOOTABLE MacBook, that whenever I try to boot from hard drive, after showing me 30 seconds of the "spinning ball" that indicates activity, shuts down. I tried it like 10 times, same result. What happens if I boot from DVD and try an installation that way? Will it try to upgrade? Will it wipe my hard drive content?
View 2 Replies
View Related
May 19, 2010
I was trying to update my G5 to snow leopard from leopard 10.5.5 when it said it could not install. So I decided to quit installation and boot from 10.5.5. It started up and reaches the apple loading screen but goes off without reaching the log in screen. I have tried booting from the CD again and resetting the PRAM but it still wont work and continues to do the same
View 2 Replies
View Related
Mar 30, 2012
I bought a new drive and need to get my Time Machine files off the old failed drive. I'm sure there are plenty of discussions about this but I can't find any. (I so dislike the new design for the support communities.)The old drive sometimes lets me access TM so I want to take advantage of one of those times to get everything across. I know it is a very slow process if it can be done
Info:Mac Mini 1.83ghz, Mac OS X (10.6.8), Great for a while.
View 4 Replies
View Related
May 21, 2012
I installed mountain lion an a partition on mac but when I deleted the partition I had to resize, so I did the the error (Partition failed Partition failed with the error: Could not modify partition map because filesystem verification failed).
View 3 Replies
View Related
Aug 21, 2014
I recently received an iMac as a "gift"... turns out it has some problems. I am unable to reinstall the default OS (Mountain Lion) because I have yet to be able to partition the HDD correctly. The error I keep getting is:Â Partition failed with the error: Wiping volume data to prevent future accidental probing failed.At this point, the default Macintosh HD isn't showing, so it must of been erased/deleted.Â
Info:
iMac
View 3 Replies
View Related
Apr 27, 2012
The OS X 10.6.x Server running Time machine, it runs daily backup to external HD, it is fine, but for couple of days, it failed, is there any logs or message that I can read what is going on? The external HD connected with firewire 800 and it still have enough space, so I think it is not a space problem
Info:Mac mini, Mac OS X (10.6)
View 2 Replies
View Related
Apr 16, 2012
This happens frequently lately: "Latest backup failed. Files couldn't be copied on backup-disk because it seems to be Read Only. After I "verify" the disk in Disk Utility, it works for a while, then the same problem. What can I do?
Info:
iMac, Mac OS X (10.6.8)
View 1 Replies
View Related
May 8, 2012
I had tried to write several DVDs and CDs before, and they failed (it turned out to be that they were already used DVD-Rs), but the burn folders for them are still on the sidebar in Finder, as shown in the pictures below. It's not necessary, but I would like to get them off, so is there any way to do it?
Info:
MacBook, Mac OS X (10.6.8)
View 5 Replies
View Related
Feb 7, 2012
I have 4 Discs.Mirrored raid sets One Raid Slice is 'System Mirror'One Raid Slice is 'Data Mirror' There is a lock symbol on all 4 discs. Status is online. I can't delete the raid sets. I can't unmount them. I am the admin but the Disk Utility says "Deleting RAID set failed. Deleting RAID set failed with the error: Invalid Request"
Info:
Mac Pro, Mac OS X (10.6)
View 6 Replies
View Related
Aug 27, 2009
Pardon me being stupid, but I'm stumped. I have the ATI Radeon HD 2400, and on the Snow Leopard specs for OpenCL it doesn't list this. Will this effect anything, or will it still work.
View 2 Replies
View Related
Sep 23, 2010
So, I have an old Mac Book Pro (circa 2006) that had become sluggish and old, so I wanted to completely reformat it and use it purely for Logic Mainstage.
The superdrive stopped working about a year and a half ago, so I wirelessly (a not so great idea, I now realise) connected to my iMacs superdrive and began installing Snow Leopard. However, the install crashed 3/4 of the way through and now the MBP shuts itself down after spending around 5 minutes on the grey apple/spinning disc logo on startup.
It seems like a lost cause but is there any way to fix this?
View 1 Replies
View Related
Dec 6, 2010
I have a 2006 MBP and the video card just failed out of nowhere. The display was all garbled. Took it to the apple store and they confirmed my suspicions. Unfortunately, this is not the video card that was covered in the class-action suit (or whatever it was) where apple admitted fault and agreed to replace for free.
Anyhow, they are offering to change the video card for $300 and throw in a battery replacement. I am otherwise pretty happy with the laptop. Do you think it's worth doing, or is it likely that other components will continue to fail. Should I just go ahead and purchase a new one?
View 7 Replies
View Related
May 22, 2010
Not sure if you can help on this or not. I bought an ibook g3 that was running 10.2 and went ahead and got 10.4 discs for it. I went ahead and began the install.I got to disc 2 and it messed up. Now each time I boot the ibook it wants disc 2, when I give it disc 2, it gets to disc 3 and messes up again and can't get passed it. Is there any way I can completely restart the install process or roll back to 10.2?
View 1 Replies
View Related
Dec 23, 2008
I'm installing 10.5.6 on the family MacBook (white) and it was running 10.5.4 previously, yet hanged when I was updating everything (there was a few updates) so I had to force power off. The Mac says it is running 10.5.6, but I wanted to apply the combo update to be safe. However, it fails when installing (it doesn't get to the stage where it reboots, still in OS X at this stage). It says "The installer could not install some files in "/". Also, repairing Disk Permissions failed too. Prior to the update, everything was working fine - I'm usually full of ideas, but when it is your Mac that is playing up I'm very keen to hear what others have to say.
View 2 Replies
View Related
Jun 1, 2009
I'm installing Windows 7 64-BIT on Boot Camp, I selected an unused partition, selected the option "Create a second partition for windows", set it's space to 131GB, inserted my DVD, which boot camp accepted, restarted, loading the windows installer for me automatically, I selected that boot camp partition, I clicked Format on it, after that was done, I click next, and it says "Windows is unable to install on the selected drive" error 0x...... (can't error code). The hard drive I am installing it on will be in slot 2 (it should be, I only have two hard drives).
View 11 Replies
View Related
Jan 5, 2010
I've got a Macbook with with Leopard v10.5-something installed. When I installed the latest update and was at about 25% done with the "writing"-part it suddenly failed. I got a message prompting to restart (I think it said that it was something wrong with the source from which it was writing), when I restart the computer I get another message promting me to restart. My backup is a few months old, so I wonder if there is some way around my problem?
View 9 Replies
View Related
