I am trying to install windows on my mac. I tried partitioning using bootcamp and told me that the verification failed the , thee disk could not be partitioned, use disk utility to repair this disk. My final place I want to be in is to have windows as my main operating system on my mac. Can somebody help?
Is there a way to clear the hard drive completely also?
My Mac won't boot. It goes to the screen with the apple and loading circle, but doesn't go past that. I've got WIN7 installed on bootcamp, so I can access that, but when I hold down option, Macintosh HD appears as EFI BOOT. I've used disc utility from my installation disc. When I've checked the permissions, it has failed. It also fails normal verification, saying "incorrect block count for file temp555244.".
I was able to select repair disk once, but that failed as well. That would say "missing thread record (id=554666),
keys out of order,
rebuilding catalog b-tree,
stopped repairing because filesystem verify or repair failed."
Someone suggested I open terminal and enter "fscl_hfs -fy/dev/disk1s0" While it ran the common and gave me a bunch of what seemed like options (r to repair btree, etc) i couldn't do anything from there. I tried entering "fsck and then /sbin/fsck -fy" as apple suggests on their site, but that did nothing.
Here are my specs:
15" Macbook Pro, Mid 2009, 500GB HD, 4GB RAM, 2.8GHZ Processor Mac OS X (10.5.8)
I was having similar problems a few days ago, when windows crashed as I was transferring files across partitions using macdrives. I had snow leopard when that happened, and reinstalled leopard. It worked fine after the reinstall, but the next day I started having these problems, which are similar in nature to the inital ones.
Freshly installed Snow Leopard 10.6.3.
Tried through Software Update, downloading solo via webpage....each time I get verification falied and/or invalid checksum when launching solo.
I got the this Error while trying to partition my hard drive after deleting my boot camp partition and then trying to make my Macintosh HD the full 250gb... Partition failed with the error: Could not modify partition map because filesystem verification failed. After I got this error I went to the "first aid" tab in disk utility and tried to "repair disk permissions" then try it and got the same error...
View 10 Replies View RelatedI tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies View RelatedI have a Macbook running Mac OS X 10.5.7 and I'm trying to use BootCamp to partition it into part Windows XP and part Mac. When I clicked 'Partition', it loaded for quite a while and then a message popped up saying 'Verification failed, this disk could not be partitioned. Use disk utility to repair this disk.' so I used Disk Utility to repair my Macintosh HD. I put in the original Leopard disk, restarted my laptop while holding shift and used Boot Camp to try to partition it again, 47GB with 17GB of free space for my Mac and 8GB space for the Windows XP but it still came up with the same message saying I needed to verify it. I tried everything but it still doesn't work. I even tried backing up my data and erasing my current data but the erase, security options, erase free space and repair disk button is grayed out.
View 2 Replies View RelatedI continue to get verification failed every time I try to download anything when it is nearing its end. It is very frustrating. What the hell is happening. Tried fixing permissions didn't do anything. Don't know what to do?
View 5 Replies View RelatedI partitioned my 320GB hard drive into 2 sections, 212GB and 108GB, I removed my 108GB partition with Disk Utility, and tried to only have one partition for my entire hard drive, but the "disk verification" fails! 108GB of my hard drive is inaccessible (it works to make a second partition over the 108GB, but I want a single partition over everything for installing windows with BootCamp) what can I do? would backing up everything and wiping my hard drive and reinstalling everything work?
View 3 Replies View RelatedI installed mountain lion an a partition on mac but when I deleted the partition I had to resize, so I did the the error (Partition failed Partition failed with the error: Could not modify partition map because filesystem verification failed).
View 3 Replies View RelatedI successfully partitioned my new imac and started the windows install with xps2, however at the stage of entering the key I discovered I was missing a digit..sooo I had to shutdown the imac manually. I managed to get macosx operating again and removed the partition in the hope of starting again with another disk (xps3) only to discover that as soon as put the disk in and started the installation (through bootcamp) I just got a black screen with a flashing white cursor in the top left hand corner. I have tried reinstalling macosx but still have same problem (I didn't wipe the drive though).
View 2 Replies View RelatedI have Windows 7 running on a separate disk on my Mac Pro.
A Bootcamp drive and System Reserved drive mount in OSX.
Fusion fails to preprocess the bootcamp partion... and it fails to start.
Any suggestions on how to get this working?
Partition failed with the error:
Could not modify partition map because filesystem verification failed
^ My windows bootcamp messed up so I deleted it and tried to install a new one but I get this message. Does this mean that there is something wrong with the hard drive?
could not modify partition map because filesystem verification failed" I am trying to partition my hard drive to set up an XP system on it (I know, but it is for AutoCAD, sorry). Anyways, when I go into disk utility, and try to set up the partition, it fails. I have a newer uMBP, 375 free GB (trying to set up a 75 GB partition) and it just wont work. Weird. Nothing seems to be online about the problem.
View 11 Replies View RelatedSo I have a macbook pro old model.Recent Problems:graphics card failedsystem crashed had to reinstall system crashed again and would be stuck on apple logo
now after i reinstalled SL after the stuck on logo problem my mac was fine.3 weeks later which is now it started to lag,slow,unresponsive.So i tried repairing disk utility and FAILED then i tried reinstalling osx FAILEDthen i had to delete my whole harddrive :*( and reformated the harddrive.FAILED AGAIN.calling apple is a no because i already called alot before so now they want to charge.So did i reformat wrong? something?
I tried installing a Dynex eSATA II ExpressCard Adapter that I bought at Best Buy. I downloaded the drivers off of the website and tried to install them and got an error message: the following failed: run preflight script for Sil3132 Mac OS X Driver. Contact the software manufacturer for assistance.
View 9 Replies View RelatedI tried installing Leopard on my iBook G4 and it did not succeed. Now, my computer has a half-installed upgraded OS that doesn't work. I was told at the Apple Store that my computer would run better with Tiger anyway since my processor is not up to snuff to handle Leopard (my iBook is from Jan 2006) and that I should erase the hard disk and re-install Tiger.
So now I'm trying to reinstall Tiger but when I insert the disk, start up the computer holding down the C key, the start stalls at the apple logo gray screen with the little cog spinning around. Nothing happens after that.
I was running 10.5.8 on both my white MacBook and Intel iMac 20," then I finally received the copy of Snow Leopard which I bought from Amazon. I decided to install it on my MacBook first to make sure the install would be successful before I upgraded my iMac, which has my important work stuff on it. The install was a success on the MacBook and after it was fully upgraded and updated, I simply opened "About This Mac" to verify the installation, opened Safari, browsed around for a minute, then proceeded to check out the new dock and airport menu features. After just a few minutes of playing around with it, I decided it was a legitimate installation, closed the MacBook, left it plugged into the power source, and walked to the other room to begin the upgrade onto my iMac. I left home for about an hour and once I had returned, the iMac installation was complete and it was running like a dream. After messing around on the iMac for a little while I decided to make sure the MacBook was still good to go. When I opened the Macbook up, all I saw was a blank screen. I assumed it was some sort of power-saver issue, because sometimes the screen doesn't like to come on right away when I open it up. My first instinct was to move my finger around on the trackpad and press some keyboard keys, which always wakes it up when this happens. Nothing seemed to be working, so at this point I pushed the power button and it proceeded to boot. As it began to boot I heard some sort of CLICKING from the HD, followed by a flashing folder with a question mark on the screen.
I assumed it was some sort of HD failure so I booted to the Snow Leopard install disk, ran Disk Utility and Startup disk, and my Mac COULD NOT FIND the HD - all it showed was the CD-ROM drive and Network Startup. I tried to reboot a few more times and almost gave up. It kept clicking at startup and I was thinking about the little magnetic arms in the HD. I thought they might be jammed in the HD for some reason. At this point, I didn't know what to do. So, as it was booting up again with the plain grey backdrop, as a last resort, pretending I was the Fonz or something, I physically whacked the area on my MacBook near the power button where the sound of the clicks was coming from. AS SOON as I did that, the clicking stopped and a few seconds later the APPLE ICON appeared... instead of that dreaded question mark folder icon! The MacBook started booting up back to it's upgraded self again! Finally I was back at the desktop, and with a sigh of relief, began typing this forum. Now, my question is WHAT THE @#$% HAPPENED?? And how on Earth did smacking it one actually fix it? Is this problem related to the recent installation of Snow Leopard or just my MacBook dying? (It is 2 years old) If anyone has any ideas as to what caused this, and how I can prevent this situation from happening in the future.
Lately, my Lion operating system had become a little buggy, so much so that it eventually wouldn't allow applications like iTunes or safari to open, they would just sit there frozen upon launch. I've had my computer for about 3 1/2 years now and it's accumulated quite a bit of junk over the years, so I wanted to go back and perform a clean install of snow leopard (I'm not sure that I want to go back to using Lion at the moment).I've backed up all my files on an external, and then wiped my hard disk. Now, when I use the white snow leopard install disc, the installation will nearly complete itself and then I get an error saying "Installation failed".I've gone back with disk utility to verify and repair the disk but disk utility told me that there was nothing wrong and that no repairs were needed.
Info:
MacBook (13-inch Early 2008), Mac OS X (10.6)
My computer will not turn on now, when I start it, it tries to install again and fails.
Info:
MacBook, Mac OS X (10.4)
Not sure if you can help on this or not. I bought an ibook g3 that was running 10.2 and went ahead and got 10.4 discs for it. I went ahead and began the install.I got to disc 2 and it messed up. Now each time I boot the ibook it wants disc 2, when I give it disc 2, it gets to disc 3 and messes up again and can't get passed it. Is there any way I can completely restart the install process or roll back to 10.2?
View 1 Replies View RelatedI'm installing 10.5.6 on the family MacBook (white) and it was running 10.5.4 previously, yet hanged when I was updating everything (there was a few updates) so I had to force power off. The Mac says it is running 10.5.6, but I wanted to apply the combo update to be safe. However, it fails when installing (it doesn't get to the stage where it reboots, still in OS X at this stage). It says "The installer could not install some files in "/". Also, repairing Disk Permissions failed too. Prior to the update, everything was working fine - I'm usually full of ideas, but when it is your Mac that is playing up I'm very keen to hear what others have to say.
View 2 Replies View RelatedI'm installing Windows 7 64-BIT on Boot Camp, I selected an unused partition, selected the option "Create a second partition for windows", set it's space to 131GB, inserted my DVD, which boot camp accepted, restarted, loading the windows installer for me automatically, I selected that boot camp partition, I clicked Format on it, after that was done, I click next, and it says "Windows is unable to install on the selected drive" error 0x...... (can't error code). The hard drive I am installing it on will be in slot 2 (it should be, I only have two hard drives).
View 11 Replies View RelatedI've got a Macbook with with Leopard v10.5-something installed. When I installed the latest update and was at about 25% done with the "writing"-part it suddenly failed. I got a message prompting to restart (I think it said that it was something wrong with the source from which it was writing), when I restart the computer I get another message promting me to restart. My backup is a few months old, so I wonder if there is some way around my problem?
View 9 Replies View RelatedI've been around since i bought my iMac 21.5 some months ago.It has been working perfecty, just a very light yellow tinge but it's so small that i can live with it.Now, i updated to Safari 5, it was a bit slow but didn't have any other problems like the ones i've seen here, just a bit slow.Yesterday i was updating to osx 10.6.4, restarted and when it was intalling it prompt a "error" window. I tried again but same results.I decided to do a clean install, (erase and install). So did everything and restarted. When installing it prompt this message "Failed to install, the installer could not copy the necessary support files" Tried i few more times but failed. Right now the iMac is booted with the installer. Can't do anything else.I'm very worried wondering what it is.
View 12 Replies View RelatedAlright, so far I have tried an Upgrade and an A&I and it still fails with that message. I don't know what to do. I have an unusable computer, and the install keeps failing.
View 20 Replies View RelatedA friend of mine somehow ruined his iMac's operating system (tiger) and tried to fresh format his hardrive. He told me that every time he would attempt to install, it would say "install failed" and he would have to restart. I couldn't imagine what he was doing wrong, so I attempted to install tiger on his iMac. OSX failed to install with "erase and install" so I ran disk utility and attempted repair with "failure to unmount".
I also tried erase via disk utility using various formating (journaled etc.). How would I be able to install tiger without error? I am not exactly sure why the installer fails, I am assuming it is something on the hard drive that is preventing install. I don't think it's the disk because the installation disk check proceeded and gave no errors.
After an installation failed to complete (which I Force Quit), nothing else will install. I have OS X Lion and am wondering if there is a way I can remedy this without bringing it into a professional? The program was Cubase 4.
Info:
MacBook Pro
iMac won't start up after failed upgrade install, all I have is a folder in the middle of my screen. And it won't allow me to reinstall my restore discs....
Info:
iMac, Mac OS X (10.4.11)
This is my first mac; were this a PC I would have fixed everything with flying colors by now. I have a PowerBook G4, 800mhz, that had Panther on it. I bought Leopard and went to install it, using the LeopardAssist program to be able to install it. I'm installing, everything is dandy, then about 10% through I get, "Install Failed". So I reboot and it refuses to reboot, staying at the gray loading screen for all eternity. I rebooted again, this time from the disc. Since Panther seems to have disappeared from my computer, LeopardAssist was no longer available as a program, so while it booted up I went into Firmware and entered the command line manually. But when it starts up, despite having entered (properly, I believe as I saw the "ok" message after each line in Firmware) the hack to run Leopard, it says Unable to install.
To fix the initial failed install problem I ran Disk Utility, but it simply said on verifying permissions, "Error: The underlying task reported failure on exit." So I ran fsck and got the OK and did it again, then rebooted and got the message on disk utility telling me it was "unmountable." Basically I cannot boot from Panther as it were--Panther is not listed when I try to choose where to boot from. And it came with Panther installed, so I don't have that install disk. I think at this point I need to figure out how to get my computer to install Leopard as it was doing; or at least to Verify and Repair the disk on Disk Utility so that I can Archive and Install, which--as it appears in the other forum questions--is the way to go.
I recently tried to install OS X Yosemite. unfortunately during the install my laptop was unplugged and the installation failed mid way through. Each time I start my mac I get to login screen and after logging in get an error message and told to restart and try again - which does not resolve the issue. Guest login do work to the safari screen.
The error message reads: You need to restart your computer. Hold down the power button until it turns off, then Press the power button again. Behind system code, including:
panic(CPU 2 caller 0xffffff 80005418bf):
"process 1 exec of /sbin/launchd failed, errno 45"@/sourcecache/xnu/xnu-1699.32.7/bsd/kern/kern_exec.c:3546
Debugger called: <panic>
Backtrace (CPU 2), Frame: Return Address
0Xffffff80e8423e00 : 0xffffff8000220792
7 more lInes like the one above
BSD process name corresponding to current thread: init
Info:
MacBook Pro (15-inch Late 2011)
