MacBook Pro :: Apple Startup Screen Spinning Wheel?
May 23, 2012
I rebooted my MacBook Pro (15", i7). When the system started back up, I got a status bar at the bottom of the screen. It took approx two minutes for the status bar to move to completion (almost like it was performing a BIOS update). I then got the gray spinning wheel (gray backdrop, darker gray Apple logo). I tried holding down the CMD and Option keys during a subsequent reboot....nothing changes.
Hi all, I have two Powerbook G4 laptops. Both have very similar problems. When I try to start up, the grey screen with the apple and spinning wheel appears, but I can't get beyond that. If I walk away for an hour, when I come back there will still be a grey screen with apple and spinning wheel.
I admit I know little about this sort of thing, so I began poking around online for solutions. I tried Tech Tool Deluxe. Inserted the disk and held down "C," but again it never progressed beyond the grey screen with apple and spinning wheel. Most frustrating. Is there any other way of running the disk with the laptop?
Entering the terminal yielded slightly different results on each machine.
...tried /sbin/fsck -fy over and over, always received the same results.
Powerbook #2: Once in terminal, this appears...
jnl: update_fs_block: failed to update block 1073777488 (ret 5) jnl: journal_open: Error replaying the journal! hfs: early jnl init: failed to open/create the journal (retval 0)
...and it won't even let me type /sbin/fsck -fy.
I tried plugging both latops into my desktop in target mode. In both cases the target icon appeared on the laptop screen but the hard drive icon never appeared on the desktop screen. I would love to at least retrieve a few files off each machine, if nothing else.
When I turn my MacBook on it does the white screen with the spinning wheel and then goes to the blue screen but it gets stuck on that screen for about a minute or two and goes to my login in screen any idea whats going on with it i have not changed anything but the other day I was turning it on and there was a bug on the keyboard and I went to kill it causing my to press some random buttons during the start up and its been doing this ever since.
I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore. Machine won't reboot. I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds Then blue screen and black pointer for approx 2 seconds The blue screen spinning wheel / black pointer repeats. Also can't start up from Snow Leopard DVD.
I get exactly the same scenario. I have held down the power key at got the tone. Still won't start. It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard. I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
I have a 2008 MacBook which after starting displays a white screen grey apple and spinning wheel Have reset pram Have tried starting holding option when the hard drive appears on screen I click on it and then the up arrow below it this takes me back to the spinning wheel with apple screen I don't have the original CDs that came with the machine
My macbook pro doesn't boot beyond the grey screen with apple icon and spinning wheel. I used the "Option" button to access the Disk Utility function and run Repair Disk and Repair Disk Permissions. Should I restart my computer?
My Macbook with 4 gb RAM won't boot standard, safe, or Recovery.. All three results in grey screen with apple logo and spinning wheel which freezes after a few minutes. It also won't boot a bootable Mavericks usb with install package. I can boot single user mode and also view whats going on in verbose.. I am including a photo of where the script stops. PS: I've already tried resetting PRAM and the SMC has been reset as well.
Mac won't boot, starts with white apple screen and spinning wheel. Also has grey loading bar which disappears after loaded then stays at white apple screen.
All of a sudden I was restarting my Air and now, it just has the spinning wheel for a few seconds and then goes blank and shuts down. I have tried everything the 'guide trouble shoots' but nothing has worked. Even was able to test the hard drive and it came back with no trouble. I tried to 'return to factory setting' but no luck and also tried resetting the Parameter RAM.
My daughter's old I Mac won't start. It is not backed up. We want to get some things off of it if we can. When we turn it on, we get the Apple logo with spinning wheel for awhile, then a question mark briefly and then a sky blue blank screen. Is there any hope of getting this to work? This computer is out of warranty. Does it seem that if we reinstall the Operating System we might find old data?
My older MacBook loads to the apple logo and spinning wheel then shuts down. I havnet really used this laptop properly for a few years and is the 2007 Mac Book model. not been modified.
my 2006 macbook has not been able to start. First it didn't even have the chime, then I read through some threads in this forum and figured out that one of my RAMs was not properly put in. I fixed that, now I get the chime, the apple sign, and a spinning wheel and I am stuck there forever.
I tried:
resetting PRAM, didn't help.
start from safe boot, still stuck with apple sign and spinning wheel.
boot from installation CD by holding either the "C" or "D" key, it would not start from the CD.
Curiously, I can start it in Windows and I am using Windows right now. Some threads said that it could be a hard drive problem, but if I am using Windows, does it mean that my hard drive is fine?
I've already spent 800+ fixing the logic board in 2008 b/c of a water spill and really don't want to spend any meaningful amount of money to fix this 1000 bucks or so laptop. If any hardware is in jeopardy, I'd rather just throw it away. However, I would like to at least be able to start it in Mac OS once so that I can back up my documents.
i messed up with the permission for my mac(2.5 GHz, 4gb ram,macbook with leopard 10.5.6 os) and permission to EVERYONE as no access. and my macbook hung and i rebooted it after that my macbook wont get pass apple logo and the spinning wheel and restarts again and again. I dont have my installer DVD presently as i am on roaming.
'Ive had a MacBookPro for about a year and a half - with zero problems to report. But, yesterday, I decided to do a software update for OSX. While waiting on it, I relaized I was running late for an appointment, got impatient and did a forced shutdown (stupid move, I now know). Anyway, upon restarting it, I get the usual start-up chime, then the grey screen with the apple logo and the spinning wheel - and then it stays there. I tried putting the operating syten disc in and did a start-up - same results. Ditto for safe start. I also tried to reset the NVRAM, got the second chime, then back to the same. Is there anything you folks can suggest? Is there a way to override this and get back to normal? I hope I'm merely having hiccups related to the operating system. Or could this be a sign of the dreaded logic board failure that I fear?
So all of the sudden my mbp will not boot past the spinning wheel/apple screen. I have not let it try for longer than 15 minutes but I don't see the point. I tried to boot in safe mode(hold down shift) but the bar only went to about 1/3 and stopped/disappeared...so I don't know what to do. This shouldn't be happening after a couple months of light use.
Just for extra info:
I am able to boot into windows 7 via boot camp. Cannot boot from cd or go into safe mode.
The colorful spinning wheel has been stuck on the screen for 2 days now. I can move the cursor around but the wheel never goes away.....I don't know what to do
A few months ago my 2004 iMac froze as I was simply shutting down the power and attempting to restart. I was not installing any new O/S.Today I attempted two things while booting with the O/S recovery disc-1: (a) I slid the disc in and held down the "C" key while I attempted to power it on. Nothing happened and I continued to see the grey screen and spinning wheel.
(b) I slid the disc inside and held down the "ALT" key while I attempted to power it on. Three icons showed up: (a) Hard Disk; (b) Recovery Disc; and (c) Test. I clicked on the Test icon and it took me to a new screen with two options: ( i ) Quick Test and ( ii ) Extended Test. I clicked on Quick Test. The first aspect of the Quick Test (I think it was Airport) went through fine and passed. The second aspect of the Quick Test (Logic Board testing) continued to show "In Progress" for a really long time (about 15 mins.). From that I figured something must have gone wrong with the Logic Board.
it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5.
I apologize for the long message but I want to be as detailed as possible. My MacBook (purchased early 2006, white 13", upgraded to Leopard about a year ago with no problems until now) will not boot past the grey screen and spinning wheel. Here' are the list of 6 steps I've followed so far and still is not working. Oh, and I do not have any peripherals attached to my MacBook:
1. Reboot in Safe Mode: tried pressing down the Shift key before the powering up sound AND after the sound. Could not get into Safe Mode. Did this several times, holding the Shift key for as much as a minute or two. Nothing but grey screen and spinning wheel.
2. Reset NVRAM/PRAM: CMD+R+P+Option: Computer restarted but still goes into Grey Screen, spinning wheel and stays there forever.
3. CMD +S: I read this online. Gave me a black screen with a lot of information, but I don't know how to read the computer jargon, let alone know what to do with said info. 4. Disk Utility Repair Disk : Inserted my Leopard install disk. Went to Utility Disk. Performed a Repair Disk and I did get two error messages, something related to id 70000452 should be id 70000450 ( I'm sorry to say I cannot remember the exact error messages). But it showed as repaired. When I did a 2nd Repair Disk, I got the message that the volume appears to be OK. Turned off and on again, nothing but grey screen and wheel.......
i have been problems on start up it will shut down after 1 second through the apple logo and spinning wheel yet once my Mac Pro 2008 starts up fully it works fine till i shut down then it all starts over
Whenever i try to "shut down" my MBP, it will freeze at the blue screen with the spinning wheel (that keeps spinning like 'eternally')! Any idea how to solve the problem? I tried booting from the installation disk and repairing disk with "disk utility" but to no avail. Have also tried repairing disk permissions... Any idea how else should i tackle this problem? Currently i can only switch off my MBP by holding the power button (forcing it to shut down).
Info: MacBook Pro, Mac OS X (10.6.8), 15 inch 2.0 GHZ
I recently installed a new hard drive into my Power Mac and I installed the Mac OS X 10.4 software. After the download, the computer restarted and after it restarted, the Apple Logo appeared and some type of spinning circle (Circle made up of lines) stared to spin. I also replaced the battery inside and hit the reset button. The funny thing is, the computer was working fine yesterday. The circle has been spinning for a couple of hours now.
i need some help regarding my iMac. I was busy installing combo update 10.5.8 on my iMac when the power in the entire house went down due to the snow. When I started my iMac back up it got stuck on the apple logo with the spinning wheel below it. I can leave it there for as long as i like nothing happens. I had the idea to reboot using the CD's i got with the iMac but there is already a disc in the discloader so i can't put the reboot CD's in. anybody know how i can get my iMac to work again? There aren't any files on the computer that i neccesarely need but if i would be able to save my photo's etc. it would be great.
I was away at a friend's yesterday and left my computer on and downloading a torrent (I have done this before and everything has been fine). When I came back today, I noticed that my computer was working very slowly so I restarted it. However, it would just stay at the grey screen with the wheel spinning forever instead of moving on to the blue screen.
I know that this has been reported many times before, even on this forum, but everything I tried does not work. I tried:
Holding down Command+S at startup and entering the command fsck -fy. Did not fix the problem Opening the Install Disc and going into Disk Utility. I repaired the permissions and verified that the HD has no problems but the problem persisted.
Going into Safe Mode. This actually works fine, but unfortunately offers an extremely limited functionality of my computer.
