IMac (Intel) :: How To Partition A 3TB Fusion Drive
Jun 2, 2014
I have new iMac with a 3TB fusion drive. I would like to create a small *backup* partition where i can create an installer version of mavericks so when i do a clean install, i can select that drive from the bootable disk selection menu and it runs the mavericks installer from that partition, rather than a USB thumb drive. I looked at the recovery mode option however it appears to download a new 5gb installer of mavericks instead of using an already downloaded version of mavericks (updated version). Â
I dont want to split the SSD/HDD components of the fusion drive so they are seperate, i just want to add a small partition to be partitioned as a mavericks installer drive. Â
Can I create a fusion drive using an ssd partition?
I'll explain myself better: I have a 500GB SSD and a 1TB HDD.
What I would like to do is keeping Mac OS on a 250GB SSD partition and with the other 250GB partition I would like to create a Fusion Drive that does not affect my primary SSD-only partition.
Info: Mac mini, OS X Mavericks (10.9), 2.6GHz / 16GB Ram
So i currently have a bootcamp partition with Windows Vista 64bit installed and i was wondering if I got VM Fusion would i be able to run my boot camp partition in Fusion and then what ever i save in fusion can be brought up in bootcamp.
I know with Boot Camp, you need to create a partition and install Windows on it. Is the same true with Fusion? Or during the install process, Fusion will create the space needed?
Just purchased a Mac Pro (my first Mac after being a long time PC user) and need some advice for carving up the disk partitions to run some other operating systems on an additional 500GB Seagate HDD.
I want to run Windows XP on a 100GB partition of the Seagate drive and use the addition space, about 380GB, to run Solaris and Linux for work specific simulation programs via VMware Fusion. I know I could run some Linux programs on OSX, but I�m trying to keep work and personal data completely separate.
I installed XP using Boot Camp with no problem on the 100GB partition and left the rest of the disk as Free Space.
My problem is getting the Free Space partitioned so I can use it to host the other OS�s running VMware Fusion. When I use the disk utility to partition the rest of the disk, it goes into �Modifying Partition Map� and hangs. I left it on all night and it didn�t finish.
Is there an easy way to make the 380GB left on the Seagate drive usable for the OSX or do I need to do something different? I�d like to avoid re-doing the Boot CampWindows layout since everything is working great on that side.
I just uninstalled VMware Fusion from my MBP. However, I don't seem to see that the 40GB I dedicated to the Windows 7 I installed is freed. Please, how do I do that? I need the 40GB to make my already slow 160GB 13'' MBP faster!
I'm currently running Parallels 3.0 (XP Pro) off of a Boot Camp partition on my Macbook Pro. I'd like to give VMWare Fusion an audition, and am wondering if I can run it off that same BC partition that Parallels uses -- or if that will create some kind of conflict that might damage the partition. I'm not talking about having Parallels and VMWare running _simultaenously_ -- only installing them both to use the same partition.
Hi.I would like to partition my drive so I can add WXP onto it.I've been told how to do the proccess,but I keep hitting a brick wall.Â
I go to disk utilities>select disk>partition...Â
It there i am unable to go any further.I know I need to select how many partition I want with the Partition Layout,but the drop down menu whcih says "current" is greyed out.Â
I have software that only runs under 10.4 on my older Imac. I would like to partition hard drive and run 10.6 on one and 10.4 on the other. Is this possible? Can I get instructions?
Info: iMac, Mac OS X (10.6.5), Partition hard drive
My old MBP has a 320gb HD, my new iMac has a 500gb HD. What I am thinking is to create a partition on my new HD for 320gb and leave the remainder 180gb alone. Can I do this and is it possible? My new iMac has snow leopard and my old MBP is running leopard. Will this cause problems?
I have a 1 TB LaCie drive that I am currently using with a MBR partition scheme. It has two partitions: one for time machine and one for windows. What I want is to use this drive to hold my time machine back ups in one partition for Lion, which I am about to switch to and install on the iMac internal drive, my windows stuff in one partition, and a third partition in which I would put a clone (CCC) of my current internal drive (Snow Leopard) that I could boot from when desired.
This would enable me to run Lion normally from the iMac's internal drive, switch to the windows partition (holding down the option key when powering on) on occasion when I want to work in a windows only app, and using the same option key on power on trick, boot into Snow Leopard when I need to use old, apps that won't run on Lion. For this, I assume that I should use the GUID partition scheme. Am I right? Is there a better way to accomplish my goal?
I tried to partition my main drive and it failed, however it is now saying that 200 gb of space on my main drive is used up. The partition was only for 100 and I have no idea what happened.
I'm having problems installing OS 10.6 on my iMac. I had to replace my hard drive with a new 1TB drive and in trying to install the OS I get a message saying I need to use Disk Utility to repartition the hard drive using GUID Partition Table but I don't see any such option in the Disk Utility menu!
so I got OS X Leopard. I had a copy of Windows Vista, and decided to try out the Boot Camp Assistant. Didn't have a problem partitioning the drives and installing Windows. However, I now find it entirely pointless to have Windows on my Mac being that I have a PC now. I tried doing it myself at first, and ended up erasing the Windows partition, and now I'm having troubles combining the drives into one. I saw something about running an uninstaller through the Boot Camp Assistant, but I think erasing the Windows partition ruined that for me. Whenever I try to use the BCA while the drive is mounted I get this error message: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. When I unmount the Windows partition, I get THIS error message: Boot Camp Assistant cannot be used. This startup disk is not supported.
I am using mac OS X 10.6, during the time to create a installation disk using disk utility by mistake I have selected my partition drive and after that I couldn't find any data in that drive, how to get it back data.
I cleared out all files of Windows I had on my Mac before I did any research. Maybe I thought for some unknown reason that is how you fix the problem - obviously not.
FYI, I did go through the whole bootcamp installation, divided my hard drive, what have you. I cannot delete the BC partition through BC Assistant, the option box is greyed out. I cannot adjust the partition size through disk utility because the minus and plus buttons are greyed out as well.
So I tried to partition my 1TB Seagate main hard drive that's in my iMac, and twice my iMac locked up at the "Shrinking volume" stage. I tried to shrink it down from 1TB to 600GB and it not only did not work, my system locked up (I gave it plenty of time) to the point where I had to forcibly shut it down and a subsequent verification of the disk revealed that it needed to be repaired using Disk Utility after restarting and booting from my OS X installation disk, which worked just fine.
I decided to try again, because the first time, I had not restarted the computer in a while, so I thought I'd "flush out" any temporary files, cache, inactive RAM, and whatever else might have been in the way the first time around. However, this time, the screen simply turned off after 15 or so minutes. Once again, it got stuck at the "Shrinking volume" point and there was also no way to revive it except for a forced shutdown, which, by the way, I did by holding down the power button on the back of the iMac. Same story, I had to restart and repair the disk using my OS X installation disk, which resolved the repair issue.
One more thing. I remember that when I first received my iMac, I was able to partition the drive in order to add a volume for Boot Camp, which I formatted in NTFS right before my Windows 7 installation. All of that worked great and I was actually impressed with how flawless that whole process executed. Eventually, I decided that I no longer needed Windows 7, so I erased the partition and re-consolidated it with the main OS X partition, again, without any problems.
With all of that said, I'm not sure what to try next, but I would really like to create 2 additional volumes. I thought I would try using Disk Utility again, but this time, booting from my OS X installation disk. Then again I didn't want to chance it again, as I have not made any backups yet. I'm in the process of making a backup right now.
So what do you guys think? Should I try to do just that, using Disk Utility after booting into the installation disk? What do you guys think is the reason as to why I can't just resize and partition using Disk Utility after a regular boot-up like I was able to before? What else could I try? Any third-party software titles like I used in Windows? Acronis and Partition Manager come to mind. I'd rather do it in OS X, though.
I need to install snow leopard on intel imac that is already running lion. I have created new partition and try to boot off of Install Disk 10.6.4 but it never completely comes up all the way to start install.
Ive lost Hd space after removing my windows partition (60gb). I can't reinstall another partition as I've only 23gb left... when removing the original partition it came up with an error (can't remember exactly..but it failed to verify?Â
I tried using disk utility to open up the disk size, by streching the corner mark?? and verify it, as per a previous recommended remedy ..it failsÂ
I have re opened osx in R mode and used disk utility it still fails to repair or verify lost space? I have no back up drive as it recently failed...tsk and don't want to lose anything else??Â
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
I have just recently deleted my Bootcamp partition in Disk Utilities, and now im trying to increase the partition size of my Macintosh HD drive. When i go to the partition map and try to increase the size. The same error always appears. "Could not modify partition map because filesystem verification failed" I have attached an Image of what my partition map looks like right now.
I am trying to format my external drive to have (2) partitions. A NTFS for backing up my Windows computer and a HFS for backing up my MacBook Pro.
This is what ive tried:
1.) Create 2 partitions on my Mac in Disk Utility. 1 partition HFS, 1 partition FAT32. After doing this both show up in OSX but neither one shows up in WinXP. I was hoping the FAT32 would show up in WinXP so I can convert it to NTFS.
2.) Create 2 partitions in WinXP using Disk Management. 1 partition is NTFS and 1 is FAT32. Connected the drive to my MBP and both partitions mounted in Finder. I then opened Disk Utility and tried to "Erase" the FAT32 partition to HFS. The process seemed to be working but then it changed the name of the partition to disk1s1 and nothing else. The partition doesnt mount in Finder or WinXP.
3.) Create 2 partitions in WinXP using Disk Managment. Both partitions as NTFS. Connected to MBP and both partitions mounted in Finder. Opened Disk Utility and tried to "Erase" one of the NTFS systems to HFS. Same thing happen as #2, renamed the partition but didnt do anything else. The partition doesnt show up in Finder or WinXP.
I had my hard drive partitioned into 2, where one was mac the other windows xp. I received this macbook as a gift from my sister so i wanted to reformat everything into mac. I popped in the Mac OS x install cd and just installed it. Now there is two hard drives and I am not able to re-partition it where i can bring it back to one again...I was suppose to delete windows first before re-formating my macbook.
So here the deal. I have a single hard drive in my MacBook Pro. Its made up into 2 partitions (one for os x and the other for data). I want to make the OS X partition into 2 separate partitions (so I'll have a total of 3) without erasing any data. I want to use that new partition to install windows. When I select the OS X partition, and set it to format at NTFS, it says the size cannot support the filesystem (25GB in this case). What size does it have to be then? Or should I format as FAT32?
I know FAT32 has a 4GB file size limit so I don't want to do that because I want to install some games on the Windows partition. How should I go about doing this?
So I have a 2012 MacBook Pro running Mavericks. I was wondering if I can add an internal SSD in the CD/DVD slot and keep my existing 1TB hard drive. Essentially creating a Fusion Drive.
When I boot Fusion with MacAffee I get a message that there is an updated version of Fusion is ready for download. When I go to the site I'm offered a choice of just Fusion or Fusion with MacAffee. Since the boot message only talks about Fusion should I do the only Fusion download. Or should I get the combined one?
I do NOT have the superdrive and would like to install windows XP pro on my MBA with VMware Fusion. I've tried making .dmg, .iso, & .cdr images of the windows XP disc but i'm having NO luck with Fusion recognizing the disc image. When I create the new Virtual Machine I select "use disc image" and point to the appropriate disc image file. I keep getting a "no bootable device" error from fusion.
Can somebody who has successfully installed windows on an MBA without using a superdrive give me the step by step instructions you used...I'm getting pretty annoyed at this point.
