MacBook Pro :: Why Remote Works Fine And Then Stops When Connect Projector
Jun 17, 2014wondering why the remote works fine and then stops when I connect a projector?
View 2 Replieswondering why the remote works fine and then stops when I connect a projector?
View 2 RepliesMy wi fi iPad works fine on wireless home network but the Mac will not connect to internet even through airport diagnostics shows connectivity ok, how can I resolve?
Info:
iMac (21.5-inch Mid 2011), iOS 5.1.1
I have had my mac book 4 months, and it fell from my couch and cracked the case around charging port, computer works fine, just doesn't charge. Apple store says I need new logic board, how could such a short fall result in such a costly fix, couldn't it be the DC input board?
View 2 Replies View RelatedThe Airport Card in my 2008 MBP 17" seems to work intermittently, sometimes when waking from sleep or restarting it shows up as "Airport Card not installed". Other times it will switch on fine. I phoned AppleCare (I have 3yr) and they made me reset the PRAM & SMC, which initially worked, but now it back to it's old tricks of not working. Not sure what to do, don't really want to send my MBP off for a week.
View 24 Replies View RelatedI bought a MacBook Air in November 2011 so I haven't even had it a full year. It does fine when it is plugged in but it has just stopped charging.
Info:
MacBook Air
I don't get this. My mom's white MacBook (Intel IGP model) showed an X across the battery like it doesn't work, so I bought her a new battery for it. However, I installed the new battery and it still shows an X but it actually does work. I figured it out by accident. I thought maybe I bought a bad battery. I tripped over the magsafe and the MB stayed on... confused, I am now here. Not finding much about this.
What causes OS X to display an X across the battery icon? Doesn't this usually mean the battery is ruined? When pushing the button on the bottom of the battery, it shows five LEDs as it's fully charged and working. I unplugged it several times, and the MB stays on.
It also reduces the screen brightness and seems to go into battery power saving settings when unplugged. So how do I get OS X to see the battery? It must be charging properly as it's not hot or bulging or anything at all.
The problem is simply that it's not showing the battery information at all as though there were no battery plugged into the MacBook. But it works as though it's plugged in and all is normal?
So I have a macbook pro 2.66 ghz, purchased in august 2009, and recently i have been experiencing the trackpad missing a couple taps when i try to click on something. i sometimes restart it and uncheck and recheck the tap to click in settings, but it eventually does the same thing.
I found this update at apple.com: URL
Which perfectly describes what im experiencing. Unfortunately this install is not for my "computer".
Is there anyway I can override the notice?? and if anyone has experienced the same thing, what did u do to fix it? Since it happens every now and then, i feel like if i were to take it to the genius bar they would just laugh at me...
bought another (have one already) HP laserjet2100 with 600N network card exactly the same as an old one I had which works fine when connected to tiger macbook pro intel and old G4 with 9.2.2However when put new printer into ethernet network at first could not see printer but this was sorted using HP Direct and assigning IP adress on Intel mac. Howver when I print I get code on first page followed by masses of blank pages.To solve this I downloaded ghost and gimp printers and managed to get it to print.However quality is really poor when compared to old printes fonts are jagged etc. Any ideas to get it up to speed with exactly same machine?
View 6 Replies View RelatedI have got a macbook pro and an iPhone5 .. my macbook and my iPhone connected to the same WiFi but for some reason the airplay don't work .. so I tried to use a (cable) goes from the router to the macbook .. and i turned on (sharing internet) so my macbook can become a WiFi .. from that my iPhone is connected to the WiFi (macbook pro WiFi) and the airplay was working fine .. the thing is i don't like the cable idea because my router on the first floor and my macbook on the second floor.. so any one have any tips for me .. by the way i need the airplay because i was streaming using (Reflector)
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.4)
I'm just wondering what cables I need to connect my Alu Macbook to my projector.
Here is a picture of my Projector's ports:
How do you connect the air to a projector, what cable do you need.
View 4 Replies View RelatedCan a MacBook Air be connected to an LCD projector?
Info:
MacBook Air, iOS 8.1.1
My computer will start running really slowly and then the keyboard stops working, then after 30 seconds or so I lose the ability to click but the mouse still moves. Command-option-esc for force quit still works some of the time though but refreshing everything from there doesn't help. After I reboot everything goes back to normal. This has happened every other day or so for about a week.
Info:
MacBook, Mac OS X (10.6.8)
Looking to connect your Mac notebook to a TV, projector, or sound system? Here's a quick guide that outlines all the things you need to make it happen - from adapters to cables to ports. Just follow the simple instructions to verify that you're getting exactly what you need. And remember, just because you setup the video side of things correctly doesn't mean you're going to get audio. If you want both video AND audio, make sure to also follow the directions indicated in the "Audio" portion of this post. VIDEO Check the ports on the back of your TV or sound system to see which of the following options are available to you. Find the port that matches below, and you're set! Remember, if you also want audio, check the "Audio" section at the bottom of the post. If you want to use composite video and you're using a MacBook (white, purchased after fall 2009), you need this adapter + a third party converter + a VGA cable + a composite (aka "RCA") cable. Aluminum unibody (black keys, purchased after summer 2009) MacBook, MacBook Air, or MacBook Pro, you need this adapter + a third party converter + a VGA cable + a composite (aka "RCA") cable.
View 24 Replies View RelatedI have a Casio (XJ-A240V/XJ-A245V) data projector, and I'm trying to connect wirelessly with a MacBook Pro (10.6.8). I see the projector in my Network wireless connection menu as "casiolpj_default1." The projector's LOGIN CODE is four digits, but the Network settings on my laptop must contain a minimum of eight characters. I've also tried connecting to the projector's Server IP address via computer to computer. I can join, but no projection. The projector is set to Wireless Input. I have clicked "detect monitors" on the MacBook. No further info is available in the projector manual.
Info:
MacBook Pro, Mac OS X (10.6.8)
could thunderbolt connect to a projector
Info:
MacBook Air, Mac OS X (10.7.3)
Yesterday, I downloaded around 1000 new fonts and installed them, all fine yesterday, but today, Safari, Firefox and Chrome are all using really whacky fonts from those that I downloaded. It happens in google and some webpages, but it's really annoying. I've been through all the preferences, defaults, fontbook (and deleted all the ones with major errors) and I deleted the font that it was using, until it chose another one, trying to fix it but with no luck
View 1 Replies View RelatedI haven't been able to send or receive iMessages on my Macbook Pro or my iPad. They do not receive any incoming messages or have the ability to send out any messages. Every time I try to send a message to a phone number REGISTERED WITH IMESSAGE, this error message pops up. Even though iMessage refuses to work on both my iPad and my Macbook, it has been working flawlessly on my iPhone. Every number that I try (and fail) to send an iMessage to on both my iPad and my Macbook, I have been successfully able to send a message to on my iPhone with no problem.
This is what gets me: I have signed in to my Mac and my iPad with several other Apple IDs and iMessage works FINE when there is another Apple ID involved. There is no problem when someone else signs in using their Apple ID. So far, the only thing that has been affected is iMessage. All other aspects of iCloud work great. FaceTime hasn't stopped working once, for example.
I have had two separate cases with Apple Support about this issue. I have brought all my machines to the apple store TWICE, and they still couldn't figure out what was wrong.
Info:
MacBook Pro (13-inch Mid 2012), OS X Mavericks (10.9.2)
I have the most recent Macbook Pro, and I want to connect it to my projector. The projector has an S-Video port. The new Macbook Pros don't have a mini-DVI port, so I can't use a Micro-DVI to S-Video adapter.
View 1 Replies View RelatedI just got this new computer and the connections are different. I realize that we now have thunderbolt instead of the video connection I had on my last MacBook. I have to teach a class on Friday. How can I connect my new computer to the projector? There doesn't seem to be an adaptor cable made for this. The projector is relatively new, expensive, and I can't buy another one. The video cable from the projector is a PC-type thing with two screws.
Info:
MacBook Pro (13-inch Late 2011), Mac OS X (10.7.3), running Powerpoint
How do I connect a 15" MacBook Pro (mid-2012) to a projector?
View 9 Replies View RelatedMy trackpad is not responding. I have to reboot and then it works for a few minutes then completely stops. Keyboard is fine. I need to use a mouse.
Info:
MacBook Air, OS X Mavericks (10.9.4)
I got a refurb 500gig Time Capsule for Christmas, and was able to set it up fine with my iMac, but when I tried to set it up with my Macbook Pro that I use through school it wouldn't show up/mount via wifi or USB. When I tried with my moms Macbook just to see, hers sees it fine.
I have a feeling its something to do with the image the school uses on the machines, but when I emailed IT, they said "Typically the images that are set up for each program are just a collaboration of programs required for you to complete course work in your specific program. There are no specific permissions turned on or off that would not allow you to connect to this device."
I had my dad play with the router, but its not the issue because the other two machines can access the Time Capsule with no issues. I can give the Time Capsule its own IP in Airport, and it shows it as connected but still won't show it when it scans to set it up with Time Machine. I can ping the Time Capsule from both the iMac and Macbook Pro. The software has been installed on both machines as well.
I'm having difficulties connecting my late-2013 retina display Macbook Pro to my Viewsonic PJD5223 projector. I have a (working) HDMI to VGA adaptor as well as an HDMI to mini-displayport/thunderbolt adaptor, and I have tried using two methods to connect:
1. Using he HDMI port directly
2. Using the thunderbolt port through the HDMI/thunderbolt adaptor on the Macbook Pro
Neither method appear to working. My Macbook Pro screen begins to blink/flicker, as if connecting then disconnecting rapidly. During the quick flashes, sometimes I can catch a glimpse of successful connection to the projector because the display settings panel for multiple screens appears.
I know that my adaptors are working because I can connect my Macbook Pro to my HP monitor with either of the two methods. I can also connect my PC to the projector using the HDMI/VGA adaptor. The problem appears to be specific to the retina display Macbook Pro or a more recent software update because I can connect to the projector using an older 2008 non-retina Macbook Pro.
Info:
MacBook Pro with Retina display, OS X Mavericks (10.9.4)
I've noticed that occasionally my IR sensor stops working, and no longer responds to changing the volume, skipping the track in iTunes, etc. It can be resolved by going into Security prefs, disabling and re-enabling the IR sensor. This is annoying, however, and I'm wondering if it's a known issue that might be fixed.
I noticed that when you disable and re-enable the IR sensor, the last few remote button pushes you made while it was broken come through in a burst.
Just as of 20 minutes ago, I was able to type, but then for no reason, my computer can't type. The strange thing is that when I use the control click, use the mouse, or use the f keys, it works just fine. I used onyx to clean my computer, which didn't work. I restarted my computer, which didn't work, and I tried to go into the Keyboard/Mouse panel, but then System Preferences quit for no reason.
View 6 Replies View RelatedI don't have an iPod. Yet. Often when I'm biking and have to carry my computer, I simply put it in my backpack and connect my headphones to the computer through the gap between the zippers. This allows me to listen to music, which is nice... right? Anyways, the problem is, or perhaps it's not a problem but entirely normal, that I can't control iTunes with the remote on the headphones.
I'm currently running Mac OS X Tiger, 10.4.11. It's a black Macbook, bought around 2006 - 2007.
My question is, is there anyway to make the remote on the headphones work with iTunes? Do I need a plugin of some sort? Skipping/pausing songs, changing volume, all that jazz. It's not a necessity, but it would definitely be preferred.
Does anyone know of one that actually works? I've tried a couple and after pasting in the XML location of my calendar, they don't do anything.
View 1 Replies View RelatedWhenever I am trying to sign in Mac App Store, a message saying "connection failed" will show up. I have no problem signing in itunes with my Apple ID, so I know my details are correct. Internet connection works just fine over ethernet, with firewall turned off and there's no other third party app (little snitch) or antivirus program which may restrict the network access from Mac App Store. I restored the OS from internet few days back because of a kernel error. Now I need to sign in Mac App Store to download my iLife applications.
Info:
MacBook Pro, Mac OS X (10.7.4)
I'm having a strange issue after upgrading to Leopard. When I try to open certain pages in Safari it instantly gives me the "Safari can?t find the server" message. When I try to open the same page in Firefox at the same time it opens normally. For many pages (like this one) Safari is working fine. My connection seems good and this is happening on reliable sites (currently Safari won't open apple.com).
View 24 Replies View Related