I just bought a new 27" iMac and when I start it up I get a white progress bar under the apple logo. When it does come up, iTunes will not play and sometimes the computer will not recognize the magic mouse or my WiFi. Everything works fine after I re-start.
Info:
iMac, Mac OS X (10.7.4)
IT does this every time, but when I do command and r or other such keyboard commands, it goes I the recovery pahe with no problem. Whenever I tried erasing the iMac to reset it, it said the disk was locked.
Info:
iMac, OS X Mountain Lion (10.8.5), April 2008 model
All I get is gray screen in start up.
Info:
Mac Pro, Mac OS X (10.6.4)
Had to force quit a number of applications to shut down computer, restarted it but froze on opening. Shut down with the power button and now it won't get past Gray screen with rotating dial (thingy)...tried the safe boot option but this seemed to get stuck after identifying some issues.
Info:
MacBook (13-inch Late 2009)
I click on the hd hard drive and change the settings to no one can read or write now I had problem to open the computer as soon I start it became gray screen so I re-stall the software and as soon I back up the computer is asking me the password I type it and can't enter after keep asking me the password is wrong
Info:iMac, Mac OS X (10.7.4)
i changed the name of the hard-drive for other reasons, and i guess i must have somehow erased the two which show up in the login box. And, i cannot locate the disks.
Info:
MacBook Pro, Other OS, no start up disk to be found
During boot Yosemite shows a grey screen with the Apple logo and a progress bar - is this normal?
Info:
iPad 2, iOS 7.0.3, 64 Ghz. 3G
I forgot to switch on the power socket at the wall so when I came back it had powered off. When I switched it back on it showed the last screen visible before sleep mode kicked in and then showed the apple logo with a progress bar underneath. The progress bar starts to move slowly but after about a minute starts again. It slowly starts to move again but stops after about two minutes and the macbook powers off.
Info:
MacBook Pro, snow leopard
I have an Early 2008 Mac Pro 3.2 GHz dual CPU (8 Cores in total) one day I started the system as usual and the system start till the Apple Gray Logo appears and then it reboots and keep doing this in (loop)
I started the Apple Hardware Diagnose and it hangs in the middle! the Apple Authorized shop/repair people told me (after the tried to fix it) it is mostly the Logic Board
Can it be the RAM or the CPUs? my mac is out of warranty and the cost to fix it is crazy! so I was thinking I can buy the parts and replace it my self.
My computer displays grey screen and apple logo for 10 minutes or more during start up and shut down. Sometimes it refuses to shut down. This issues started after installing OS lion. What do I do?
Info:
MacBook Air, Mac OS X (10.7.3)
I have had my MacBook for almost two years and the battery had just died on me. So I sent it back to Apple and got a new one. But ever since switching over to this new battery, my computer has had issues starting up. A grey screen fades into white and the Apple logo never appears. The computer will just stay like that for hours. A friend suggested turning the power off and back on, holding apple+ctrl+P+R, which worked. However, the next time I turned my computer on, the screen stayed white again, without an Apple logo. Can you tell me what the deal is? Should I bother reporting this to Apple? Is this permanent damage I'm going to have to go thru everytime I start me laptop? Any way to fix it? Thanks.
View 3 Replies View RelatedI am fixing this 2007 iMac for free for an autistic child. Apparently, changing computers for someone that is autistic isn't ideal. I don't have the history with this iMac, just that it isn't working. They supposedly did have the hard drive replaced? It sounds like a dvd is inside it when it starts up, could be the installation dvd?Either way, I have not seen it before where the Apple logo refuses to show on the start up screen. It just stays gray. Â
1. I've tried zapping the PRAM. Didn't have any changes.Â
2. I tried starting up in safe mode, but getting passed the apple logo is required for thatÂ
3. I tried single user mode, but getting passed the apple logo is required for thatÂ
4. I tried holding the c key to start up off of the dvd, nothing happensÂ
5. I tried holding the mouse button (and cmd, opt, f, o) to manually eject the dvd during start-up.Â
Info:
iMac, Mac OS X (10.6.8)
I recently noticed the Apple logo is magenta at start up, when it is centered on the screen, before it turns gray and moves up the screen to make room for login details. I cannot replicate the issue on restart but only see it when it starts up first thing in the morning. It literally flashes up for just a second or two then normalizes to gray.
Info:
MacBook Pro (Retina, Mid 2012), OS X Mavericks (10.9.3)
my mac book pro is giving me a blue screen, some days ago it gave me a message that the desktop has too much files how can i get it opened is there any shortcut that i can open my desktop?
Info:
MacBook Pro, Mac OS X (10.7.4)
I need to re-install this OS, but I don't have the DVD image for the disk. how to get a copy?Â
Info:
MacBook, Mac OS X (10.5.8)
I'm trying to setup my Mac Mini but get the grey screen with folder/question mark and I can't tell if the chips have been swapped. The brand is unfamiliar and my place hosted some creepy hackers while I was in the hospital. I'm still finding mysteries.
Info:Mac mini, MacOS X (10.5), cant identify RAM
I have a Rev A 12 inch Powerbook - 867 mHz, 640 RAM, 40 GB hard drive. The machine's always been reliable and has performed great over the years. I bought it the last week of July, 2003.
Yesterday, the Pbook was shut down, and I press the on button so it would boot up. Almost immediately, the hard drive makes a loud, whirring noise. The computer advances to the gray screen with the Apple logo, but it doesn't get past that point and the noise continues, as if it's a car engine that just won't start...
I'm going to take it to my local Apple Store in the morning, and hopefully the data, including my nearly 22 GB of music, can be saved. Any thoughts on how to get my computer working again? By the way, it's the original hard drive installed. Hopefully this is enough info to generate some ideas, I'm stumped.
I called in and asked about a slowly running computer and Applecare suggested holding Option+Control+Shift+Power Button for 5-10 seconds and then releasing and then hold the shift button while powering on to go into safe mode. I did this on my macbook pro as he told me and decided to go ahead and do it on my IMac and mac pro as well. It worked on the MBP and IMac but on the Mac Pro the computer came on when I held the first key combo and is taking a really long time (hours) to start up. I need the computer to work, for work. I tried just restarting the computer, unplugging it, etc but each time it has the gray progress bar and takes a really long time. Of course I downloaded and updated to the newest operating system through mac app store so I don't have a start up disc...
Info:
Mac Pro 8 Core / 16GB DDR3 / 3 x 2.0TB + 500GB HDD / 2 x NVIDIA GT 120, Mac OS X (10.7.1), 2 x 23' Samsung Syncmaster 2494 / Bella Pro 3.0 / Apple Magic Mo
So, today I tried to install windows through boot camp assistant on my mac. When it got to partitioning my drive I got an error that my hard drive needed repairing. So I opened up disk utility and clicked verify disk (I can't click repair) and got this error Disk Utility stopped verifying �Chris Hard Drive� because the following error was encountered: Filesystem verify or repair failed. I then researched this and learned to fix the problem I must boot from my leopard install disk and use the DU from their. Unfortunately I don't have access to the disk. But I have the install disk from my old macbook (the white one) so I used this. I put in the disk and shut down. When I turn it on I hold C but all I get is a grey screen but with out the apple logo. When I try turning it out holding alt I don't get the option of the CD just Chris Hard Drive. But when I boot up holding D i do get to the hardware test screen but I get the error that's something like "Hardware test does not support this hardware". Will the Leopard install of a different type of macbook not work on my new macbook pro (13" aluminium)?
View 1 Replies View RelatedToday when I turned on my MacBook Pro (Mid 2010 model) , the apple logo appeared as normal, but then the spinning gear and a progress bar appeared under it. Now everytime in turn my computer on, this progress bar will appear, get to about the 2/3 mark and then the computer will abruptly turn off. I have read articles about this saying that I have to format my hard drive. I want to know if there is a way to fix this problem with out having to format my hard drive.
Info:MacBookPro, Mac OS X (10.7.3)
Unfortunately I bumped the switch on the power strip that my Mac Mini (1.42ghz G4, OS X 10.3) is plugged into while it was running. Now it won't boot up. All I get is the gray screen with the gray apple logo and the spinning wheel but no OSX.
View 14 Replies View RelatedI shut the computer off like i normally do. It was fine and well. Went to turn it on, and saw a bar. Whats it for? Its been moving, but very slowly. It never does this. Is there malware or something causing it? I had a movie on the DVD slot, it that caused it. It wasn't spinning though.
View 8 Replies View RelatedI've checked disk permissions, run SMART check. the disk seems fine but the problem persists. It began a few days ago.
Info:
MacBook Pro (17-inch Early 2009), OS X Mountain Lion
Yet I see the white power light on and I can here it turn on but no screen it is just black?
Info:
MacBook
I have installed smartvoip app, i cant to sign in, but when i connect to my univeristy net it is working but when i come to my hostel it doesn't work, it says server timeout, try again later.
Info:MacBookPro, Mac OS X (10.7.3), smatvoip
My 24 inch iMac is not getting pass the apple logo. It acts like it's loading, but then the little progress spinner (not sure of the name) stops spinning after 2-3 minutes. It never wants to get pass that. I'm running the latest version of Lion.
Here's the specs:
3.06GHZ
4GB
500GB
NVIDIA GeForce 8800 GS
So far I've tried using disc utility on my snow leopard disc....it doesn't load. I've tried to start in safe mode...it loads about half way and stops. Oddly enough windows xp works in bootcamp. It runs okay besides when I try to move windows. I'm guessing it's the graphics card. No idea really. Here is a video I made to show you what I mean: [URL]. I've also tried installing a new 1TB HD and it still won't boot from a disc for some reason. I tried install snow leopard through the internal superdrive and with an external superdrive. No dice.
Info:
iMac, Mac OS X (10.1.x)
I still have the appearance of the gray screen after performing all the solutions provided by apple support. What shall I do now?
Info:
MacBook Pro, Mac OS X (10.7.3)
Today just woke up and turned on my iMac. It started with apple logo then I saw a cancel logo which shocked me..
View 10 Replies View RelatedMac stay on gray to long before it turn on
Info:
MacBook Pro, Mac OS X (10.6.8)
After recently doing a fresh install of Snow Leopard, it was working great for about a week, and now it hangs at boot and flashes the Apple Logo, a NO sign, and a folder sign. I booted in verboose mode and it say that it could not load drivers.
I had this problem before and I used Leopard's (10.5) Archive and Install feature to fix it.
Where is this located on SL (10.6) ? I DO NOT want to loose my data
