I bought an eMac from a friend of my husband's, and there wasn't the Safari icon to connect to the internet. So, I clicked on the apple icon at the top left of the screen, then clicked on Mac OS X, and it would usually open up the internet browser and I could surf the web from there. Well, my husband was messing around with the computer to try and figure things out, and now when I click on that same thing a gray box pops up in the middle of the screen and says that my system settings are being updated and it's unable to open my preferred web browser and I need to try again in a few minutes. This started last night, so it's been well over 24 hours, as we let it set there thinking it just wasn't finished updating. How do I get rid of that?
i bought an emac that was previously used in a school. i changed all the settings on the computer to my own and when i shut it down and turned it back on, the settings were restored to the original. i've heard that schools use programs to make this happen so it doesn't save anything on their computers but i'm not sure of the name of the application or how to get rid of it.
Ok, so, I got given an emac 2002 the other day, its been used at my local college for the last seven years and so it has all these student restrictions on it and so I want to hard restore to it's factory settings.
I have the osx discs and i've tried running them by holdig "C" on power up but it doesn't respond.
I just want it to go back to factory settings.
It would be awesome if you could keep the language basic because I'm not very good with computer talk!
I've been experience intermediate issues ranging from not showing icons standard in OSX (such as in my shared devices, HardDrive icons tha tmount on the desktop, etc) this is a unibody 2.4ghz i got in February that came with 10.5.5 and used combo updates on each update...ive done a blank install from scratch with nothing on it and i still experience the missing icon issues that dont happen on other unibody mbps i use ??
((the other macbook pro im connecting to is an identical model 2.4 and the other one is a unibody 17, they display the proper icons under 10.5.7, unlike shown below))
My system gets random freezes even when nothing but the browser, word or small applications, it will beachball for aboud 30seconds to 2minutes even after a clean install and a combo straight to 10.5.7 any ideas on these issues? Am I the only one who is having these missing icon issues...even after a clean isntall with the original OSX Install Discs?
I updated my system and am now having print problems. Where did the Library go? Did they do away with it? I found printer drivers in Applications. Do I have a corrupted system?
I have a 2.8ghz macbook pro running leopard and after finally downloading the latest software update bringing me to 10.5.8 I feel it's running hotter nearly all the time.when simply using garageband, my MBP never usually ran hotter than 125 F, but after the update it runs at 180 constantly in garageband. could the update have done anything to make this happen, it's the only change I can think of
i have an 2003 emac with osx and would like to get it back up and running but wirelessly, i have a pc running wirelessly at the moment and want to have the use of both from the same modem but cant use the ethernet cable due to location of telephone socket can i get a wireless adaptor for the emac too
I work everyday with my 21.5' iMac and it had OS Lion before I updated to Mavericks last month. As I work with lots of files, I have also a 1TB Lacie external drive pluged into it via firewire and I constantly access these files. After I updated though, I'm experiencing a strange problem. Everytime I search for a file on Finder, all the results that come up can't be edited or even selected. This is driving me crazy because I must open another tab and go all the way through the file I want as I can't select any file from the searches. All the search results come up written in gray color and with a empty circle on its left side. I can't even click on them! For better explanation, here is a picture of what happens:
Before the update, I used to normally access every result the search came up to.
I have another iMac here in the network with Mavericks too and all the searches returns with selectable and editable results.
I'm wanting to change my emac (panther) to a tiger operating system. I can purchase a OS X Tiger on ebay. What should I watch out for as I'd like to do a full install?
I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3.
What is the minimal configuration (operating system and memory) for installing iTunes 10.x on a G4 eMac?It already runs on Tiger 10.4.11 with 718MB of RAM.
Am I correct in the assumption that if I set the view options on the top level (OS-X HDD, for example) and select 'Use as Defaults' any folders below that (i.e. everything) will assume those settings?
If so, it doesn't seem to be doing that for me. I'm constantly coming across folders that I need to set the view options manually...
you are running SMC fan control at a low or medium fan setting, that the smc overrides those settings if the Mac starts to overheat and requiring fans to be above those settings?So far I'm using SMC at Medium fan settings, my CPU fan is constantly at 2150 RPM range. Having your Mac cooler than normal for the price of some lower fans is quite worth it, but I'm worried that if I am using a lot of high CPU apps that the fans won't automatically go up, because right now i'm compressing some 7zip archives of old data and the CPU is around 104 F, 2150 RPM fan still, it didn't change one bit from CPU at 90 F idle and 2150 RPM idle
I have tried to migrate hardrive content from the emac to our imac with no luck. We still need to get eveything off the emac. What is the best way to do this? Take the hard drive out and then what?
We have a macbook in the same situation if you can answer that one too.
I am running XP on VMware 2.01 and I was wondering what are the best settings to run it at. Is their a downside to have it running 2 cpus and max ram as well? Will OSX go really slugish? It says something about memory swapping occuring, what is this?
I am running an iMac G5 (just pre Intel) using OS 10.4.11. My internet is via an external modem, ethernet connected. Everything is working fine (as far as I know!) However, for no particular reason I opened "System Preferences" and on clicking on "Network" was confronted with this:- [URL]. On clicking the OK button nothing happens and the only way to get out of System Preferences is to Force Quit it. As I can't get into "networks" in System Preference, I have no idea how the settings have changed. I can't remember when I last installed any new software - it's also ages since I looked at that section of System Preferences.
something that really bugs me, all random folders have different View Settings (CMD+J) is there anyway to change EVERY folder on Finder to have the same settings?
Find or reinstalling the systems preferences as well as the settings icon is lost. both were put in to the trash and trash has since been emptied . Is there any way of getting them back with out loseing eveything on my mac
I have this iMac for slightly over two years and when I forst got it I thought it would be a good idea to have it start up a 6:55am each weeday. After about a week I changed my mind and went back into Power Saver and turned off the settings. Since then, I can't tget the machine to quit auto-starting at 6:55, 7:55 and even sometime 8:55. I have called Apple, taken it in to an Apple store, they even claim to have replaced the computer
I upgraded from Leopard to SL, but couldn't get some software to work - so downgraded back to leopard. Since then, in setting up a proxy, when I enter the username and password, and apply, gong back to the proxy screen again, the username and password isn't there. I suspect a permissions issue.
A couple days ago after restarting my imac I was shocked to find that my personal preferences had been reset to default and that some programs were behaving like they had just been installed. Firefox for instance asked me to import settings from safari, after skipping importing i found that all my bookmarks and add-ons were gone.
I've upgraded to iTunes 10.1 and every time I open it I get the following message. I've tried accepting multiple times and still no luck. I've removed the rule from the firewall settings, rebooted and opened iTunes again.
Has anyone figure out how to stop that annoying loop in system preferences that says settings have been changed??I can get out of it by a two handed click on the OK button and locations but then it just comes back. I don't want to delete all the info on there and have to retype in.I'm only finding old posts back in 2008 on this! Am I that far behind??I was hoping a permanent easy fix has been found by now. I haven't had the need to get into System pref.
I just bought a new Apple Magic Trackpad and after playing with it at the store I went into the settings to set a few things however when I got mine home and installed/paired it with the Bluetooth, I'm not showing any settings in my System Preferences for the Trackpad.
