Windows On Mac :: Unable To Login As Admin / Screen Goes Black And Gives Bunch Of Options
Jun 18, 2009
Alright, I FINALLY got windows on my mac and am very proud of myself. However, I am encountering what I hope is a final problem.
I want to log into Windows as an admin, so when it starts up I hit F8. The screen goes black and gives me a bunch of options, I choose "Safe Mode". Everything so far works like it should. But then the log screen appears with two options: Admin and my regular user. Obviously I want admin, but my keyboard and mouse are utterly nonresponsive , even the little caps light won't turn on. This means I'm stuck there, staring at what I want to click but unable to do so. The only button that works is the power button.
Anyone else run into this? More importantly, anyone know how to fix it?
View 6 Replies
ADVERTISEMENT
Jan 2, 2010
On my Mac Pro i have windows XP on hard drive number 2. I went to boot to it today after installing a program and nothing happens. The monitors are receiving information but there just a black screen.
Not sure what i should do considering that i can still access the drive and files from the MAC Side. I can also get to the boot screen to select safe mode but that also does nothing.
It is a early 09 Mac Pro...i have been using the computer this way since last April. Cant figure out what happened.
View 1 Replies
View Related
Dec 4, 2009
I am unable to log in to my IMac. When I try and log in to the Administrator account (my only account) it brings up a dialog box that says "You are unable to log in to the user account (user name) at this time with and OK button. Before this I was performing the Secure Empty Trash feature which froze on me. I tried exiting it out and logging out but was unable to. So I held the power button on the side of my IMac till it shut down. That is when this problem occurred.
My computer is:
IMac G4
Version 10.4.11
Build 8S135
Serial Number QP40909NQB8
View 1 Replies
View Related
Feb 1, 2010
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
View 3 Replies
View Related
Jul 16, 2010
I've recently started work with a new company and the previous employee has left, but has setup the adminstrative account on the work computer. When asked for a password, I don't know what he used. My boss and I have gone through some various passwords he used but none work. What are my options?
View 4 Replies
View Related
Apr 23, 2009
I just noticed (I never really looked before) a bunch of login items listed that mostly I don't know their purpose. The logitech control center for my bluetooth mouse is there. That makes sense as to connect my mouse at startup. But I have something called 'Airport Base Station Agent' and iTunesHelper' and a couple of other do-dads for a couple of other small apps (Rogue Amoeba Schedule Help, for ex.) that I have no idea why they should be 'starting' when I log in, nor are they something I even notice when I login in. Are they some kind of background process goings on I don't know of? If I toss this stuff, would it hurt anything? For example, is that Airport agent thing an important background utility that's needed for my computer to connect to its wireless on startup or what?
View 3 Replies
View Related
Dec 20, 2010
I'm wondering if there is a setting to fix this.I have all sixteen spaces enabled. I tend to keep web browsers open on at least three or four of them. Let's say I load up a forum page with a bunch of photos, and pop off to another space to do something else. Well, as that forum page loads (slowly due to all the photos), Spaces will automatically take me back to that space every few seconds. I switch away, it switches right back. Very annoying.Likewise, if I had a news site open in a browser, and it does one of those auto-reloads every five or ten minutes or whatever, Spaces takes me back to that space. I don't WANT to go back; let the damn pages reload, but leave me alone to keep working. I'll go back when I'm ready.
View 1 Replies
View Related
Jun 20, 2008
Hi! Im new to the forums but i really need help with something and i was hoping someone here could help me out. So I just installed Tech Tool Deluxe onto my macbook and then shut it down later. I went back to use it again and when i turned it on a login screen appeared asking me to put in my password. I did that and the screen turned blue (looking like it was loading) and then went back to the login screen. Every time i put in my password it just takes me back to the login screen. I have had my mac for a while and i dont want my hardrive to get wiped out so what do i do? Thank you for looking
View 1 Replies
View Related
Nov 22, 2010
I am not the admin of the computer, but the admin gave me admin rights for a temporary time being, so when I went to login to my user it asked the question if i wanted to make some change or whatever, well appaerantly I clicked the wrong choice and i had the "Remember this choice" box clicked. So is there anyway to go back to change this?I have tried restarting and completely shutting down the comp, and taking admin rights off and putting them back on.
View 3 Replies
View Related
Aug 19, 2008
recently my powerbook g4 has been doing some funny things. ..--Sometimes it won't turn on when pressing the button but eventually it will. --The computer would not book up earlier and would just stay on a white screen, like the white screen you normally get when booting but without the apple logo.--When my computer eventually booted it worked for a couple of mins and then the screen went a tinted black colour and a box came up in the middle of the screen saying i need to reboot (the box had a power logo for the background)--Then i rebooted and as i was rebooting a black screen came up with lots of writing in white. A bit like on a windows pc.
View 8 Replies
View Related
Mar 7, 2012
when I tried to launch the macosx lion, after display the login window, the whole window become black.
Then I inject the U-Disk that has MacOSX Lion Installer in it, after the white screen, it become black too. So I can not re-install macosx.
Then I tried press `shift` at login. It also didn't solve the problem. At last I tried the single user mode. It appears some problems:
... USBF ... The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 4 of Hub at 0X24000000)
no interval found for . Using 8000000
USBF: 9.62 AppleUSBEHCI[0Xffffff800ba92000]::Found a transaction which hasn't moved in 5 seconds on bus 0X24, timeing out!(Addr:0, EP:0)
...(it appears 5 times)
USBF: 51.642 [0Xffffff800c4eaa00] The IOUSBFamily was not able to enumerate a device.
Info:
MacBook, Mac OS X (10.7.3)
View 4 Replies
View Related
May 23, 2010
I recently purchased a powerbook G4 running version 10.5.8. I am able to login to everything and set my username as the administrator, but I can not set a password for it, if i try to input a password or change the password I get an error message saying I have input an incorrect password. When I purchased the computer everything was blank except for the user name was set as mac user, as I said I was able to change the username but not the password.
View 3 Replies
View Related
Sep 16, 2009
So I have a DYNEX 21 inch HD TV conected up to my MBP via the VGA connection route. My problem is that when I want a program (or more specifically in this case a game) to go into fullscreen mode it automatically goes to my primary monitor and turns the other screen black. I know I can switch the primary monitor from my actual laptop screen to the TV however I just want the game to be full screen on the TV while still having access to my dock and everything on my laptop.
View 2 Replies
View Related
Oct 11, 2009
This only happens when I choose to boot into windows. The screen sort of hangs for about 20 seconds in a black screen with an underscore at the top left corner before even starting to boot into windows. I know its normal for this to happen for like 5 seconds tops, but this is happening for about 20 seconds and its dreadful trying to boot into Windows 7 because it takes so long. When windows is done starting up i don't even get any messages saying startup failed or something like that. This is so annoying that I even reinstalled everything but the same thing happened.
View 13 Replies
View Related
Mar 17, 2009
I was trying to install Windows XP Pro, but for some reason the it wasn't showing another HDD to install Windows on. So I quit the install, and restarted my computer. Now all that happens is the normal grey screen appears (with no Apple logo), then it goes to a black screen and has the blinking cursor (Kinda like DOS).
View 14 Replies
View Related
Aug 27, 2010
Since yesterday, my screen has been acting really wierd. Every few hours, the screen goes all fuzzy with a bunch of white lines on it, and it becomes completely unusable. It only happens for a few seconds each time (fortunately, it's fine right now), but it's kinda got me worried because I need to keep this computer for 2 more years before getting a new one, and I can't afford to fix it. I can't stop using it because I need it for school, so if it breaks, I'm completely screwed.
View 4 Replies
View Related
Mar 30, 2009
I'm looking for some information and possible repair tips for my cousins iMac G5 (First Gen) 1989. I don't know anything about mac's, I've always been a PC user. But, I recently fixed both my aunt's laptop and desktop (both pc), so my cousin asked if I would take a look at her mac, as well. Basically, when the iMac is turned on, the screen goes weird. It fills with a bunch of lines (both horizontal and vertical), some spanning the entire length of the screen, and some being only about half an inch long. The lines don't stay stable, they flicker and change positions every few seconds. Behind the lines, you can see the black screen with the apple on it.
It doesn't seem to get past this point though, it seems to freeze and never leave the apple screen, although the flickering lines continue to change. I tried jiggling and moving the power cord around, and whenever I moved it the lines on the screen seemed to change positions. I also tried taking hold of the sides of the monitor (machine? I have no idea what mac-speak for anything is) and very gently pressing and "twisting", and this changed the lines as well, at one point it turned to all vertical lines spanning the entire length of the screen. We opened it up to see if any wires were loose inside or anything, but there really weren't any exposed wires that I could see that I could even try to tighten/adjust. Right now it's not even usable.
View 3 Replies
View Related
Oct 27, 2008
I've reseated memory and my hard drive, but still if I bump it freezes or black screens. I'm going to pickup an external hard drive to backup my data, because this is scaring the crap out of me.
View 4 Replies
View Related
Jul 24, 2010
I want to upgrade one of my accounts on Mac OS X to admin privileges but I am not seeing the option from my admin account. I couldn't find anything on Google, is it possible to do this without deleting the account and making a whole new one?
View 4 Replies
View Related
May 9, 2012
At start up the screen is very dark, so I can't log in to my account, because I can't see the arrow. I tried to make the screen more bright with fn F2, but that doesn't work. How can I have a bright screen at start up, so that I can see what I'm doing?
Info:
MacBook Pro, Mac OS X (10.7.3)
View 3 Replies
View Related
Apr 19, 2010
I'm trying to install Windows 7 64bit on my 27" iMac but i keep getting a black screen after it finished installing windows but its fine when i boot OSX. Does anyone know why am i having this problem?
View 4 Replies
View Related
Sep 7, 2010
In the past month, my Macbook pro, which I have had since May 2009, has started to act very strange.
Sometimes when I watch videos online (collegehumor, youtube, etc.), or am just working on my laptop, the screen stops working. It goes mostly black, and a bunch of weird lines appear on the screen.
The system hasn't crashed or froze, since I can still see my mouse because one little line follows its movement, and the audio still works, and I can still Command + Q and exit out of programs.
I think the problem may have been that I slipped on the stairs one day holding my Macbook Pro and may have damaged the screen somehow, but I just want to know if this has happened to somebody else with their MBP, and what caused it?
View 2 Replies
View Related
Feb 19, 2009
Today I came home from work and turned on my Mac Pro. At first everything appeared normal and I walked away on a call for a few minutes. Out of the corner of my eye I noticed the screen was flashing to black off and on. I turned off the tower to try and restart it and now it wont boot!
I have removed all other hard drives aside from the boot drive. Re-seated all RAM. Tried various combination's of RAM. Tried to load the snow leopard install only to get a kernal panic. Tried again with just RAM and received a kenal panic as well.
*Update* It seems that the RAM when I swapped it out was VERY hot for only being in a short period of time (under 10 min). Not sure if this helps.
View 1 Replies
View Related
Aug 29, 2009
I upgraded my Mini no problem, then I put the install disk in my MacBook and started the upgrade. All appeared normal.
Came back about an hour later, and the MacBook was asleep. Woke it, expecting to see the new login screen, but I got the old login screen. Logged in, and did not see the welcome movie or anything to indicate the new OS. Checked 'About This Mac', and it says OS 10.5.8.
Before I started the upgrade I had about 11.5GB free on my 80GB hard drive. Now I have just short of 10GB free. There is a folder on my HD titled 'Mac OS X Install Data' with a 'date modified' of today (all other folders have older dates) -- it appears to be mostly .pkg files, the biggest of which are 'Essentials.pkg' (841MB) and 'BaseSystem.pkg' (625MB).
Can anyone tell what went wrong -- why when the computer restarted it's not running 10.6? And, maybe more importantly, what should I do now? Run the installer disk again? Could it be that I didn't have enough free space on my HD?
View 9 Replies
View Related
Sep 13, 2009
For the last 5 hours i have been trying to install Windows 7 on my iMac
Specs:
24-inch : 2.66GHz
2.66GHz Intel Core 2 Duo
4GB memory
NVIDIA GeForce 9400M
Running with 10.5.8 version. This problem that I get, and can't pass beyond it, is that I get black screen with a little white line in the left-upper corner of the screen. I have tryed to let it hang for 20 min, but nothing happens.
What have i done:
1. Boot Camp 32GB space.
2. Disk Util -> inspect the memory, reparing the harddrive, analyzing alle the things I can in Disc Util.
3. Format the partation og make new.Nothing has halped me.. I'm stuck and can't do anyting.
View 5 Replies
View Related
Aug 12, 2009
I am running OSX 10.5.8. A little while ago I successfully Boot-Camped my hard drive and installed Windows 7, but i recently got a new hard drive. I copied over my OSX partition successfully, but didn't copy over the Windows partition. On my new drive I went through the boot camp assistant and created a partition and inserted the Windows 7 disc. But when it restarts, it just seems to hang there- it's just a black screen with a blinking white underscore(_).
I have been told that because I copied over my OSX partition it didn't set up the MBR on the new disk, is their any way to fix this? (besides doing a clean install of OSX)
Are there any software or guides available to help me fix this?
View 3 Replies
View Related
Aug 31, 2009
I was just using my powerbook G4 12" when it "clicked", the screen went black and it will not respond. the power cable light is on, and I've tried another battery, but it does not turn on! the little light on the latch button that glows usually, is not on. What has happened to my Powerbook????! I don't have applecare but I imagine I will be calling Apple this morning unless someone can help here
View 3 Replies
View Related
Sep 1, 2010
I've been experiencing a black screen with a frozen cursor (everything is basically frozen) after waking up from sleep in Windows Vista. The Mac side of things are fine, and its super annoying, because I have to do a hard reboot each time this happens. I tried google, but it appears that everyone that has a problem similar to this has a responsive computer or just needed a different driver for their graphics card. I've tried installing a different X1600 driver for this, but it didn't work. I'm on a MBP1,1 running Windows Vista SP2 (fully upgraded) with Bootcamp 3.1.
View 6 Replies
View Related
Feb 28, 2009
I've recently deleted my Windows side on Bootcamp and when ever I start my Mac up, it goes into this black screen saying "No CD found, press any key to exit" or something and I have to press alt everytime I boot my Mac up to avoid going into that mode.
View 2 Replies
View Related
May 27, 2009
Imac has all the updates before I partitioned with bootcamp (52 GB) I inserted a Win 7 Pro 32 bit disc (OEM from newegg). It installed windows and auto rebooted, windows came up and auto booted again. All I got was a black screen, I think it just turned off. I tried powering the machine on and booted to windows, but a message asking if I wanted to boot normally or go into safe mode. Does anyone have an idea why I can't get past this step?
View 2 Replies
View Related
