So has anyone tried the new Bootcamp 3.0 drives off the Leopard disk with Windows yet? Do they support Windows 7 now? Any improvements to battery life, heat, etc?
View 9 RepliesI am trying to set up a windows partition using bootcamp in leopard but it tells me some files cannot be moved and it cannot create a partition. I verified and repaired permissions and tried again but still no go.
View 13 Replies View RelatedDo I? If so where the hell is the disk. Just got my Macbook a couple days ago.
View 2 Replies View Relatedever since i upgraded to sl my boot camp partition cant be booted from. how do i make the partition bootable again. its windows 7 btw
View 4 Replies View RelatedI have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
I keep getting the following error 3 quarters of the way:
STOP: C000021A "Fatal system error. The windows subsystem process terminated un expectedly w/ a status of OX C000005. System shut down. It's a blue screen with white letter.
I'm using Office XP Service Pack 2 with imac OSX Install DVD version 10.6.3.
The steps I'm taking are:
Log onto my mac and use pre installed bootcamp to partition the drive. I'm using 32GB of space. Then I use my xp Prof w/ service pack 2 cd to install xp. At this time everything is working fine except for the missing drives. Then I put the bootcamp cd that came with my imac into the iMac and run bootcamp. It looks like everything is working perfectly. The imac is finding wireless internet and all the drives look like they are working fine until out of no where a blue screen pops up and states what I wrote below. There is nothing else on the screen. I'm using a 27 inch imac that i bought about 5 weeks ago new.
I have used bootcamp to partition my disk and install windows vista onto my uMB. Now I want to partition the disk again to create a tri boot setup where I can either install ubuntu or the dev preview of snow leopard (I haven't decided yet). Can I just do this with disk utility and shrink my OS X partition in order to create a new partition or will this cause problems with the disk? I would really like to not do a fresh install of OS X because I have had to do this twice to fix disk problems relating to bootcamp.
View 12 Replies View RelatedI'm trying to run bootcamp to install windows, but it won't partion. It says "Verification failed. This disk could not be partitioned. Use Disk Utility to repair this disk."
I've repaired it, or least what I thought was repairing it.
I went to Disk Utility, highlighted Macintosh HD and under "First Aid" I clicked "Repair Disk Permissions".
It goes through the process and whatnot. Am I not choosing the correct repair? The button that says "Repair Disk" does not let me click on it.
I have recently installed Win 7 on my 17" iMac using Bootcamp. The partitioning went fine, so did the Windows install, but the Bootcamp driver disk refuses to run. I have tried 'Troubleshoot Compatibility' using every logical option, but to no avail. This seems kind of wierd to me, as no one else has mentioned a problem like this.
I have:
Retail boxed leopard, with 10.5.1 on the Disc
Mac OS 10.5.6 installed
Bootcamp 2.0
Win 7, Build 7000
17" 2GHz Core 2 Duo iMac 2 GB RAM 160GB HDD, newly formatted, with 10GB for Win 7 (I am storing all of my Data and apps on an exteral drive) As far as I know, Win 7 and Mac OS are fully updated. Win 7 runs fine, but the lack of drivers means very little works. It can just about manage the internet...
I ran Bootcamp Assistant and assigned 20 Gb of space to windows - leaving 115 Gb free. I had defragmented my harddrive using iDefrag and then I ran the partition. Afterwards I got the common error "The Disk Cannot be partitioned because some files cannot be moved. Backup the disk and use disk utility to format it as a single Mac OS Extended (Journaled) volume." Is there a simple way to fix this problem (I have looked on the web) without having to run disk utility and format the harddrive.
View 1 Replies View RelatedI just installed bootcamp and the drivers from the apple cd, it went smoothly. It was installed on a new 20GB partition. I use Windows XP,and OS X 10.5.7. Now,after the windows was installed, I restarted my mac, hold option and chose the OS X partition, there was the apple logo then a blue screen,and it stayed that way. Blue screen was changed by a bluish-gray screen every 25 seconds or so,but that was short and it got back to the normal blue screen. That went on for sometime and I had to hold the off button for 5 seconds to turn it off. I tried starting os x from safe mode, it took longer to start, but it still wouldn't work. I used the "Bootable Utilities" disk,and opened Disk Utility,and Disk Warrior,checked the disk,they didn't find any errors.
View 4 Replies View RelatedI put a new HD in about 4 months ago, and I'm trying to partition bootcamp and got this error message.. Do i need to Reformat my HD?
View 4 Replies View RelatedSo I currently have windows XP running on the boot camp partition of my macbook unibody (Before they were called 'pros') and I want to purchase Windows 7 for this machine, my plan is to use a vista upgrade, then the windows 7 upgrade in order to get Windows 7 home premium on my machine (I get windows 7 upgrade for only $30 seeing as I'm a student)
So I am wondering if there is a way to do the upgrade or if I have to start with a full install every time I want a new version of windows?
I am trying to do a clean install of windows 7 using two upgrade disks (windows vista and windows 7) after windows vista was wiped from my hard drive when my hd crashed. I put in the windows vista disk after partitioning my hard drive (using only 5gb for windows side) and the disk cannot be recognized. It ends up trying to load for 20min then finally allows me to pop it back out. Can anyone direct me how to fix this and install windows using these two disks? My macbook pro is running snow leopard if that matters.
View 2 Replies View RelatedCan you install XP/Vista on the MBA using remote disk during the bootcamp installation process or do you have to have the external super drive attached?
View 6 Replies View RelatedSo i'm at work installing Vista via bootcamp on my newer Macbook Pro and I don't have my OSX disk. Where else can I get the drivers?
View 2 Replies View RelatedThe title say it all, I've tried with my vista disc in the drive and out of the drive, given it a few goes for 10-20 minutes (recommended by people online) and then an hour just incase.
View 1 Replies View RelatedHas anyone really tried out the ability to access your OSX Partition from Windows yet? I'm able to see mostly everything but the one folder I want to see, my home folder! It just shows up empty. Maybe it's because I have my account password protected, but just for installing programs, not for logging in. Plus, if that was what is causing it to not work, Apple should have asked for a username and password to login to the folder. Will Apple ever get its Windows Bootcamp software working correctly? They sure can never get it on the first try.
View 24 Replies View RelatedI just installed Windows XP SP2 on my iMac and when I tried installing the Boot Camp disk my computer crashes in a blue screen then immediately restarts.
View 5 Replies View RelatedI'm retrying to install windows on my mac. It's the second time I'm trying, but it has somehow become way harder. The first time I installed Windows, everything worked perfectly, untill I noticed that SP2 wasn't installed, and I couldn't install it on my windows, somehow.
Now I'm trying it with a different version of XP (Pro), but Bootcamp is giving issues. I haven't deleted the old volume/partition (don't know the difference) of windows yet, as it is installed on my startup disk and Disk Utility won't delete it .
I have an alu iMac with a 500GB HDD. There is about 200GB free. Every time I run the Bootcamp Assistant, choose a Windows partition (doesn't matter what size), it sits with the progress bar spinning for ages before it gives me the error "Disk could not be partitioned as some files cannot be moved. Please reformat the disk and try again". There is no way I can back the disk up, reformat, reinstall and re-update everything. No other apps are running when I run the Bootcamp Assistant.
View 9 Replies View RelatedI have a late 2008 uMB and my friend has a late 2008 uMBP. Is it possible to use my restore disk to install the bootcamp drivers on his computer after he installs windows? Are the drivers all the same, or are they hardware specific like they are with the OSX install? Any help is appreciated,
View 1 Replies View RelatedI would like to install windows 7 ultimate 64 bit on my mac on a partition created with bootcamp to play many MMOs that are not compatible with mac. It 's safe or need a safety backup ?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I would like to "Back-up", "Clone" or create an "Image" or whatever else people call it of my bootcamp installation. I know I can create an "Image" of bootcamp via disk utility but how would I restore it?
Would I first delete the bootcamp partition and then re-create a bootcamp partition and then restore? Or would I just restore? Will the end result be what I am expecting, i.e., my Win 7 install right back to the perfect state of when I created the image?
Right now, let's say my Windows 7 install got smoked one day for whatever reason (it is windows...) and I needed to re-install. Me personally, I would just go into Bootcamp Assistant, delete the Windows partition then create a new one and then get installing. Unfortunately installing and updating takes hours and that is what I am trying to avoid.
I used to be able to drag files over to my storage drive from Windows 7, but I'm unable to do it now, I have Boot Camp 3.1 installed and the latest update for it. If I right click in the storage drive and select New Folder it says Destination Access Denied, and has the buttons Continue / Skip / Cancel. When I click Continue, it shows the same dialog but it says You need permission to perform this action and the buttons Try Again or Cancel, I've repeatedly clicked Try Again and it does nothing.
View 7 Replies View RelatedWill they improve battery management/heat management?
View 10 Replies View Relatedjust started using Mac OS recently
AFAIK, I will be needing the snowleopard installation cd for the drivers in windows after I finish installing windows(xp). However, I bought this MBP from ebay so it came with leopard cd only but with snowleopard installed on the macchine.
So I am wondering if leopard cd works as well to obtain drivers for the windows?
I have a unibody 13" MacBook running Leopard with Bootcamp running Windows Vista. I want to try and make the move this weekend to both Snow Leopard AND Windows 7.
First, what is my best plan of attack here? Will Snow Leopard install just fine and ignore my current 25gb partition of Vista currently set up? (i.e. not effect it at all). I would assume so but I'm not totally sure.
Second, what is the best way to go about installing Windows 7? I am a university student and I will be getting the $30 upgrade version of Windows 7. I've heard that doing a clean install is the best way to go instead of going over vista, so I hear I need to make an iso out of the upgrade version and use that?
I'm planning on doing Snow Leopard first, then Windows 7 second as this seems like the most logical order for me.
I installed a beta version if windows 7 into my computer last night. Now everytime I want to use snow leopard I have to use press the option button. Windows boots automatically. I took windows off and now snow leopard wont work at all. The screen just goes black and it says a few words like install. How do i get snow leopard to start when I turn my computer on?
View 4 Replies View RelatedI find myself using Mac OS X Leopard less and less and windows almost all the time these days and on the occasion that I need leopard i find it suits me fine. I want to be as up to date with boot camp as possible but don't want to upgrade to snow leopard (I need the current version of Quicktime for my video editing software so cant risk going to QT-X) so can i install Bootcamp 3.0 without installing SL? I really want to be able to read my Mac drives (I need my itunes!!) from Windows.
View 10 Replies View Related