Windows On Mac :: How To Move Partition To An Actual Hard Drive
Oct 5, 2010
I have an i7 iMac and I installed Windows 7 on it and was wondering down the road when I move onto a new machine, how to I take that partition with me? For example, I use time machine to back up my Mac files so at any time I'll be ready to start anew, I can I do this for my windows partition? BTW, the partition is 500GB on a 2 TB drive.
I'm hoping there's a way to give the partition it's own hard drive when I get a computer that can handle multiple hard drives.
View 2 Replies
ADVERTISEMENT
Jan 4, 2010
I currently have XP installed on a Bootcamp partition on my main iMac hard drive. I've got a new external USB 2.0 SATA hard drive enclosure on the way that I plan to install a couple of spare SATA drives into. I was wondering about somehow moving my current Bootcamp partition off the main iMac drive and onto the spare WD Raptor drive that I've got without having to reinstall everything all over again. My second question would be - if I am able to switch the Bootcamp partition location, would the USB 2.0 transfer speed be fast enough for when I run windows? I typically use Windows for gaming only and very little else.
View 2 Replies
View Related
May 16, 2010
I've been able to find ways to reallocate space on my hard drive but what if i want to take windows completely off and restore my hard drive to purely OS X? Is there a way to do that also?
View 6 Replies
View Related
Sep 20, 2010
I have a win 7 installation on its own drive in my mac pro. I now need to move it to a new hard drive.
In mac I would use super duper or carbon copy cloner to just copy the lot onto another drive whilst making it bootable. How would I do this with the windows drive?
View 12 Replies
View Related
Apr 24, 2009
I am installing XP on my mac laptop and am not sure how much space to partition. The laptop's total space is about 235GB with currently 50GB free.
I will only be using Windows for a few specific programs: Autodesk: Toxik, Mudbox, Motionbuilder and Cleaner XL. I probably won't be using the programs too extensively either, I mainly use Maya and I have the OSX version of that.
Based on that info I was hoping to get a rough estimate on how much space I should partition for XP, I don't want to go too low and not be able to install and use everything but at the same time I don't want to put too much space on the XP partition either and end up with wasted space.
View 1 Replies
View Related
May 14, 2009
I had windows in a bootcamp partition for a while, and today, i decided to erase the partition and make a new, bigger one. I erased it just fine, but I can't make another one, it just gives me this error: Verification failed: this disk could not be partitioned. Use disk utility to repair this disk. I went to disk utility and i clicked verify disk (repair disk was not highlighted) and it gave me another error: filesystem verify or repair failed. I also repaired disk permissions with no such luck.
View 17 Replies
View Related
Sep 8, 2009
I was thinking of picking up this hard drive Seagate? FreeAgent™ Desk External USB 2.0 Hard Drive, 1TB (1,000GB)- [URL] I was wondering if I could use it to back up both a windows and a mac partition
View 1 Replies
View Related
Jan 23, 2010
Is there a way I can access a laptop drive's contents from the harddrive via USB to USB (similar to Macs' Firewire-firewire) to recover the harddrive? An Asus laptop i'm using doesn't get into Vista and I tried Safe mode but it doesn't work..
View 2 Replies
View Related
Jul 31, 2010
I'm getting a new imac in a weeks time, and was wondering about bootcamp. When I wanted to dual-boot a PC and Linux, I had to partition the hard-drive and install the OSes before doing anything else. Do I need to do that for bootcamp and Windows 7? I only really need windows on bootcamp for a game that's coming out in 2011. Do I need to install it now or can I wait?
View 3 Replies
View Related
Jun 17, 2009
I previously had a Windows partition that I created with Boot Camp. I was running out of room and wanting to try out Windows 7, so I deleted it and tried to create a larger one. So far, i have not been able to create a new partition. The error I'm currently getting reads "Verification failed. This disk could not be partitioned. Use Disk Utility to repair this disk." When I do that, I usually get that it needs repairing, I repair it, and then it happens again. I've done the repairing using the Leopard DVD or booting from another hard drive that's bootable. Another error I was getting said there is currently data there that cannot be moved. That errors told me to back up, wipe my hard drive, and do a reinstall. I really don't want to have to do that, and I really don't NEED Windows, but I did recently want to play some games and dug up my old games for Windows.
View 9 Replies
View Related
Jul 15, 2009
I really need to free up space on the windows partition of my Mac so that I can install certain software I need in order to complete a project due really soon. What would be the best way to accomplish this (I'd rather not increase the partition w/ a third party app)? I was thinking the best is to eliminate unnecessary files that I am pretty certain were installed as part of the Vista install so that I can recover as much HDD space on the windows partition as possible, but don't know what I can eliminate safely? Can someone please offer some ideas and very basic steps of where to find any of the items you reference?
View 5 Replies
View Related
Mar 25, 2012
The picture above is evidence of my self-corrupting OS. Those 3 problems are the same every single time I boot my computer. I have done countless re-installs of OS X Lion, even bought a new hard drive and did a clean install. Because of the self-corruption, I cant resize or partition my drive for Windows, with Boot Camp giving me a generic "An error has occurred. Format your disk and re-install Mac OS X" (Partitioning failed so I never wiped).
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
View 5 Replies
View Related
Apr 11, 2006
When you bought your MBP how much space did you have available out of the box. My 80 gig hardrive has a capacity of 74.21 and I never checked how much was used when I bought it. Reason I am asking is, I have 42.4 gigs left and I cant figure out where all that space went. I can account for 9 gigs worth of itunes music and videos, and maybe another 4 or so gigs of other stuff. What about the rest? How do I check if I have a HUGE plist file or something?
View 7 Replies
View Related
Jul 12, 2009
so I got OS X Leopard. I had a copy of Windows Vista, and decided to try out the Boot Camp Assistant. Didn't have a problem partitioning the drives and installing Windows. However, I now find it entirely pointless to have Windows on my Mac being that I have a PC now. I tried doing it myself at first, and ended up erasing the Windows partition, and now I'm having troubles combining the drives into one. I saw something about running an uninstaller through the Boot Camp Assistant, but I think erasing the Windows partition ruined that for me. Whenever I try to use the BCA while the drive is mounted I get this error message: The startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted as a single Mac OS Extended (Journaled) volume or already partitioned by Boot Camp Assistant for installing Windows. When I unmount the Windows partition, I get THIS error message: Boot Camp Assistant cannot be used. This startup disk is not supported.
View 2 Replies
View Related
Dec 14, 2009
Just a quick rundown of what I'm trying to do here:I have a 1 TB external USB SimpleDrive hard drive that is currently partitioned into three partitions, two formatted with FAT32 and one formatted with HFS+ for Time Machine. I learned how to enable Mac OS X 10.6 Snow Leopard's NTFS read-write capability today and so I no longer need to keep my first two partitions as FAT32 (especially since I have files larger than 4 GB I would like to store on them). I have data on the first FAT32 partition that I would like to transfer to the second FAT32 partition once I have reformatted it as NTFS whereby I will then be able to reformat the first FAT32 partition to NTFS without losing my data.I have nothing important on the second FAT32 partition, but when I opened Disk Management in Administrative Tools in Windows 7, I found that the second FAT32 partition is currently set as the active partition of that volume. When I right-clicked and asked to Format that partition exclusively, I received the following
View 1 Replies
View Related
May 21, 2012
in mac book air how can we use external hard drive as storage of actual hdd.
View 3 Replies
View Related
Dec 12, 2009
I'm thinking about installing Windows 7 on my hard drive using Bootcamp. I'd like to know if in the future I decide to remove windows, am I able to remove the partition and revert back to the full hard drive space or not?
View 1 Replies
View Related
Dec 27, 2009
I recently got rid of a partition I had made for bootcamp since I never use it, and would rather have the space back. I deleted the partition through disc utility, and then through the partition tab, tried to get back that space by dragging down the tab to restore the space originally set for the partition. When I go to apply this change, it notifies that my hard drive will be re-sized. I accept and then a few minutes later it comes back with the error "Partition failed with the error: Filesystem verify or repair failed" Does anybody know how I can restore this space successfully back into my main hard drive? I've attached some screenshots
View 10 Replies
View Related
Oct 15, 2008
My MacBook Pro recently shows I am using about 130 GB of its 233 GB hard drive capacity. When I add the GB's of all its constituent folders, I only see 75 GB being used. What has happened, and how can I resolve this. I've run Disk Utility, and the disk and permissions check out fine. (On my G5, everything adds up, and I've just noticed this discrepancy in the last week.)
View 6 Replies
View Related
Jun 7, 2010
I have a new MPB 15" i5 High-Res. I have VMWare fusion running a vm that I use for work. However, I would like to create a boot camp partition for just gaming.
I am looking to upgrade my hard drive to 500GB. The question is: If I create my boot camp partition now, can I just clone it to the new hard drive, or will I have to start over?
Is it as simple as just copying everything over, or should I just wait a few months until I get a new hard drive?
View 2 Replies
View Related
Aug 7, 2010
I'm trying to get Windows 7 on my mac and when I go to bootcamp and do a partition I get, The disk cannot be partitioned because some files cannot be moved. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again. My disk is not partitioned and it's formatted correctly so i searched and saw that my HDD is like untidy or whatever it is called and it needs defragged. So i get iDeFrag full version and I do not know how to work it. Then I read I should back up a clone of my HDD and then copy it back to my mac, but i have no external hard drive.
View 4 Replies
View Related
Jul 27, 2009
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
View 1 Replies
View Related
Jun 29, 2009
I'm a total Windows newbie and I'm having trouble moving programs that I've installed onto Parallels 4.0 into my boot camp partition. Is this even possible?
If so what is the best way to go about quickly accessing programs from the Parallels virtual machine?
Could I burn them to a disk?
View 3 Replies
View Related
Jul 30, 2009
I had my hard drive partitioned into 2, where one was mac the other windows xp. I received this macbook as a gift from my sister so i wanted to reformat everything into mac. I popped in the Mac OS x install cd and just installed it. Now there is two hard drives and I am not able to re-partition it where i can bring it back to one again...I was suppose to delete windows first before re-formating my macbook.
View 9 Replies
View Related
Jul 19, 2008
I purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
View 3 Replies
View Related
Feb 19, 2010
I have a Dual 1.8 G5 and my hard drive has started to make a clicking sound every now and then. I believe it may be on the verge of dying anyday. Since i have space to put in another internal hard drive i am planning to get a WD Black Caviar 1TB and put it in.
Now my question is how do i move all my application from the old internal drive to the new internal drive.From what i have researched it seems that using a enclosure is the way to go but all the info i have seen is referring to replacing the drive rather adding a new one.I would like to move everything to the new drive and make that a master.What is the best way to perform this task?
View 4 Replies
View Related
Dec 15, 2009
I'm trying to install Windows 7 and can't get the boot camp assistant to partition my drive. The drive in question is 500GB with over 200GB free space. I want a Windows partition of 35-40GB.On first attempt I kept getting the cannot move files error when trying to partition. I read up on the error online, and most people suggested issues with parallels or needing to use idefrag. I had parallels on my machine at one point, but am not sure if there are any problem folders still hiding somewhere. Any tips on that part?I ran idefrag overnight last night. When I booted the machine up this morning, I launched it again to verify that the disk was defraged. Boot camp still doesn't want to play.
View 8 Replies
View Related
Nov 7, 2010
I am running out of space on my Unibody MBP (June 2009 version). I just bought an OWC 120gb SSD, with the intention of putting it where my disk drive is, using their data doubler (which makes it fit).
I want to use the SSD as my startup disk, but have heard that if you use the drive which is connected where the old disk drive used to be as the start up disk, there are problems with the computer waking from sleep, unless you turn off hibernation.
So instead, I want to move my current hard drive to the disk drive slot, and put the SSD in the main slot.
If I were to do this, would I need to do any "extra" configuring besides setting the SSD as my startup disk?
After moving my harddrive to the disk drive slot, will it boot up normally, and then I can just add the SSD?
View 12 Replies
View Related
May 1, 2008
I'm transferring my OX onto a new hard drive so am going to move the slots so the new main HD is in Bay 1.
Do I physically move them all first, then restore using the disk utility or do I physically move them after restoring?
In physically moving a hard drive are there any settings that need changing?
View 2 Replies
View Related
Feb 3, 2009
i got me a new MAC after 10 years of windows. now i'm in the ****** situation that i can not even move a simple jpeg from my MACto a Harddrive. it says : `this item could not be moved because '' Motive '' cannot be modefied. In the old days this was an easy thing to do , move a jpeg from my PC to a connected Harddrive. now with that brandnew mac i can do nothin. does anyone else encounter such a thing and maybe solve it ??
View 24 Replies
View Related
