I have a win 7 installation on its own drive in my mac pro. I now need to move it to a new hard drive.
In mac I would use super duper or carbon copy cloner to just copy the lot onto another drive whilst making it bootable. How would I do this with the windows drive?
I have XP on a 1 TB HDD (only about 80 GB is used) and I want to move it to a 120 GB partition on an SSD and boot from there.
This would be trivial in OSX - just use carbon copy. But, I can't get it done using Acronis True Image 2010 or any other utility I've tried while in XP. Everything wants to clone the entire 1 TB and not simply the 80ish GB of files.
What should I use to accomplish my goal (or what must I do different with Acronis)?
I currently have XP installed on a Bootcamp partition on my main iMac hard drive. I've got a new external USB 2.0 SATA hard drive enclosure on the way that I plan to install a couple of spare SATA drives into. I was wondering about somehow moving my current Bootcamp partition off the main iMac drive and onto the spare WD Raptor drive that I've got without having to reinstall everything all over again. My second question would be - if I am able to switch the Bootcamp partition location, would the USB 2.0 transfer speed be fast enough for when I run windows? I typically use Windows for gaming only and very little else.
View 2 Replies View RelatedI have an i7 iMac and I installed Windows 7 on it and was wondering down the road when I move onto a new machine, how to I take that partition with me? For example, I use time machine to back up my Mac files so at any time I'll be ready to start anew, I can I do this for my windows partition? BTW, the partition is 500GB on a 2 TB drive.
I'm hoping there's a way to give the partition it's own hard drive when I get a computer that can handle multiple hard drives.
Can I put boot camp onto a portable/external HDD and change boot options to run the HDD on start up? I have a very new macbook (its my first mac), so don't want to start messing around with partitions etc., as I am very new to macs...
I'm also wondering if there is a Linux/Ubuntu emulator available for the mac? And if there is one, would it be possible to partition an external hardrive into three segments, one for Bootcamp, one for Linux, and one for time capsule?
Last time I did this I ended up reinstalling my whole computer because I took out the Cd under the installation. And it don't seems like that I partitioned it or what it's called. I have done it now but I did go back and I shut down BootCamp assistant and now I have 2 hard drives Macintosh Hd and BootCamp but what I was wondering about is that if I going to install will the install be made on the BootCamp hard drive automatically?
View 5 Replies View RelatedI had windows in a bootcamp partition for a while, and today, i decided to erase the partition and make a new, bigger one. I erased it just fine, but I can't make another one, it just gives me this error: Verification failed: this disk could not be partitioned. Use disk utility to repair this disk. I went to disk utility and i clicked verify disk (repair disk was not highlighted) and it gave me another error: filesystem verify or repair failed. I also repaired disk permissions with no such luck.
View 17 Replies View RelatedI'm getting a new imac in a weeks time, and was wondering about bootcamp. When I wanted to dual-boot a PC and Linux, I had to partition the hard-drive and install the OSes before doing anything else. Do I need to do that for bootcamp and Windows 7? I only really need windows on bootcamp for a game that's coming out in 2011. Do I need to install it now or can I wait?
View 3 Replies View RelatedI made an attempt to use Winclone to move Win7 (NTFS, 64-bit) to a new hard drive. After the image was deployed I rebooted. On the new drive,Win7 BSODs - I can't even boot into command line mode as it summarily reboots. The original bootcamp partition boots perfectly, however. I know Winclone was discontinued - assuming other people have used it with Win7 and have not had problems, without having to use Win7's DVD to do a repair install or to - for the moment - delete the original bootcamp partition that I know works, are there any means to fix the boot sector or alleviate this problem? (I think the BCD wants to point to the wrong partition, despite it starting to boot on its own...)
View 3 Replies View RelatedI previously had a Windows partition that I created with Boot Camp. I was running out of room and wanting to try out Windows 7, so I deleted it and tried to create a larger one. So far, i have not been able to create a new partition. The error I'm currently getting reads "Verification failed. This disk could not be partitioned. Use Disk Utility to repair this disk." When I do that, I usually get that it needs repairing, I repair it, and then it happens again. I've done the repairing using the Leopard DVD or booting from another hard drive that's bootable. Another error I was getting said there is currently data there that cannot be moved. That errors told me to back up, wipe my hard drive, and do a reinstall. I really don't want to have to do that, and I really don't NEED Windows, but I did recently want to play some games and dug up my old games for Windows.
View 9 Replies View RelatedI used to have boot camp on my machine and now I reinstalled everything like brand new. But it still shows that dedicated space as windows hard drive. I wish to eliminate this and just let my original be the only one.
View 6 Replies View RelatedI have the Windows 7 .iso from Microsoft, but I can't burn it to a DVD as it's too large. I do have a 1TB external HDD, though. Is there a way I can put the .iso on that, and when I go to set up windows it installs off the drive instead of a disk?
View 1 Replies View RelatedI have a new imac (love it!) and have installed vista on a 32Gb partition using Boot Camp. I was planning on saving files I create in vista on the external Hard drive. But I can't see it when I'm in Vista so can not save files to it. It is a terrabyte disk and is used by Time machine. Is there anyway I can save to it or should I add another external HD just for windows, I can see it when I go to system hard ware (it says seagate HD etc but there is no info on files sizes etc-there is a button which says populate but I dare not press it as I'm scared it will screw up my back ups) Another irritation is that when I reboot back to mac it throws out the internet and I have to reset the modem and router so it works again.
View 3 Replies View RelatedI have a 13" white macbook, which I had partitioned with Bootcamp. When I decided to upgrade to a 500 GB drive I didn't want to reinstall everything, so after ordering and installing my new harddrive, I used super duper to clone my mac volume onto the new drive. [URL]. It worked like a charm for the mac volume, but did not copy my windows volume. No problem, I figure, I will just run the boot camp assistant again, b/c I didn't have that much on that volume anyway. However when I booted up in my new 500 gb mac drive, the Boot Camp Assistant would not work and generated an error message stating. "The startup disk cannot be partitioned or restored to a single partition. Back up the disk and use Disk Utility to format it as a single Mac OS Extended (Journaled) volume. Restore your information to the disk and try using Boot Camp Assistant again."
Only problem is, my drive was already formatted as an extended journaled volume. I erased it and reformatted and recloned from super duper just to double check, but still got the same error message. Then I tried to start from scratch, and erased the drive again and tried to install an operating system from the dvd. I got another error message saying that the hard drive could not be partitioned and that I needed to use disk utility to reformat the disk as a GUID partition. However I couldn't figure out how to do that, and couldn't find anything on the disk utility that said GUID. it took a call to mac support (thanks mark!) to figure it out. Thought I would post it here in case anyone else has the same problem. It turned out that the hard drive I'd ordered was somehow not set up the way as my old one.
The solution was:
1. boot from the mac os DVD
2. go into disk utility, select the new hard drive, and choose the partition tab
3. change the number of partitions from "current" to "1"
4. then the 'options' button becomes available, and you can go in and select to format as a GUID drive.
from that point on, I was able to proceed with installing Mac OS x, install all the software updates, and run the boot camp partition.
Once I had the hard drive partitioned properly I used Super Duper to clone my mac volume onto the new drive, and then used Winclone to clone the windows drive. for some reason the main site for winclone is down right now - two canoes - but I got a working copy here: [URL] none of the help info on two canoes was available yesterday or today either so I had a little trouble figuring out how to use it. (though others have said it's super easy...). I wasn't sure where to save the disk image, on a mac or windows volume and on my old or new drive. The way I ended up doing it (that worked) was:
1. open winclone, and in the 'image' tab, create an image and save it on the mac volume of the new hard drive. (I couldn't save it on the old drive b/c there wasn't enough room)
2. then, still in winclone, go to the 'restore' screen and restore from the mac volume of the internal hard drive to the windows volume.
I know this has been discussed before but I am completely confused. I've got some GPS maps that I want to load onto my system using the Windows side...but I want to put the maps onto my external hard drive. The hard drive has been formatted to mac
View 5 Replies View RelatedI have a Santa Rosa MBP with a broken Superdrive, and I need to get Windows 7 installed on Bootcamp. I had a copy of Parallels laying around so I install W7 on that, but now I need a way to image that over to my Bootcamp partition. Is this possible? No amount of Googling is turning anything up.
Alternatively, if anyone knows other ways for me to get W7 on my laptop, that would be just as appreciated. I have tried imaging my flash drive with W7, and unfortunately I get an error on rEFIt that external hard drives are not well-supported by Apple's firmware for legacy OS booting.
I have a Windows 7 Virtual Machine on Fusion 5 installed on OS X Mavericks. How can it be moved to BootCamp?
Info:
MacBook Pro, OS X Mavericks (10.9.2), 8GB 1333 MHz DDR3
I have an aluminum unibody macbook from October 2008. I'm looking to upgrade the 160 GB hard drive inside to a 500 GB one I'm considering from Newegg. Would it be possible to migrate/copy/clone the entire contents of my current hard drive to the 500 GB one? I also have a section of my current hard drive partitioned for Bootcamp. Would this affect my ability to transfer everything over?
If this is possible at all, how can I go about doing so? If there are steps laid out somewhere, I'd appreciate a referral. Sorry if my question is a little elementary, but I did a search on these forums and also google and nothing really came up
I purchased a new hard drive, my second Samsung 750 GB. My first one is partitioned, half for OSX half for Vista. Ultimately, I want to have a hard drive per operating system.
At first I thought the way to go for this, based on some stuff I read here on Mac Rumors was to use winclone to clone the windows partition,restore it to the new drive, and then I don't know what.I did the restore, there were errors in the log though..something about the wrong kind of partition. Basically it's become a pain in the ass, and I'm thinking there has to be an easier way.
It occurred to me, I might be able to use "Install and Archive" to move the boot volume to the new disk, moving the user files and network settings with it. If I did this would I be able to expand the windows partition using winclone utilizing the full hard drive? Or could moving the boot volume to the new disk mess up my Windows partition?
I have a Dual 1.8 G5 and my hard drive has started to make a clicking sound every now and then. I believe it may be on the verge of dying anyday. Since i have space to put in another internal hard drive i am planning to get a WD Black Caviar 1TB and put it in.
Now my question is how do i move all my application from the old internal drive to the new internal drive.From what i have researched it seems that using a enclosure is the way to go but all the info i have seen is referring to replacing the drive rather adding a new one.I would like to move everything to the new drive and make that a master.What is the best way to perform this task?
I am running out of space on my Unibody MBP (June 2009 version). I just bought an OWC 120gb SSD, with the intention of putting it where my disk drive is, using their data doubler (which makes it fit).
I want to use the SSD as my startup disk, but have heard that if you use the drive which is connected where the old disk drive used to be as the start up disk, there are problems with the computer waking from sleep, unless you turn off hibernation.
So instead, I want to move my current hard drive to the disk drive slot, and put the SSD in the main slot.
If I were to do this, would I need to do any "extra" configuring besides setting the SSD as my startup disk?
After moving my harddrive to the disk drive slot, will it boot up normally, and then I can just add the SSD?
I'm transferring my OX onto a new hard drive so am going to move the slots so the new main HD is in Bay 1.
Do I physically move them all first, then restore using the disk utility or do I physically move them after restoring?
In physically moving a hard drive are there any settings that need changing?
i got me a new MAC after 10 years of windows. now i'm in the ****** situation that i can not even move a simple jpeg from my MACto a Harddrive. it says : `this item could not be moved because '' Motive '' cannot be modefied. In the old days this was an easy thing to do , move a jpeg from my PC to a connected Harddrive. now with that brandnew mac i can do nothin. does anyone else encounter such a thing and maybe solve it ??
View 24 Replies View RelatedI'm thinking about moving from a Mac Pro with SSD. I'm not comfortable doing an SSD install on the iMac, so wondering how much of a drop off I'd experience going from an SSD to the iMac's hard drive.
View 3 Replies View RelatedCurrently, I have a 160GB Intel G2 SSD in my 15" MBP. When Intel releases the 320GB version soon, the 160GB will move to my wife's 13" MBP.
Except for the few titles, the software we use are identical (The software we have is all "multiple copy" versions).
To avoid reinstalling Snow Leopard and the programs again, I would like to just install the SSD to the 13" MBP and make some changes (e.g., changing accounts in Mail, loading different set of Firefox bookmarks, etc etc). It seems like the name and the password of the Admin account can be changed under "user accounts" as well.
I am on a mac pro and I can navigate my OS drive fine in terminal but I have 3 other hard drives how to I go from my OS hard drive to one of my other hard drives?
View 2 Replies View RelatedI am planning to move my SSD drive from my MBP into an iMac. If i do this, will it boot, or will I need to format and reinstall everything? (i understand its a 2.5" drive, that isn't an issue I have a caddy)
View 3 Replies View Relatedjust bought a new hard drive from OWC 500 GB 7200rpm, want to install it in my 15in unibody macbook pro june 2009. Bought the kit that came w/ the inclosure so i can turn my old drive into an external.
Here's my question
is there a way i can move all my data to my new hard drive before putting it into the computer, so once its in its ready to go? I don't have the leopard disc w/ me. I left it at home and didn't bring it back to school w/ me.
I've got a MacBook Pro and a PowerBook 15" Al 1.67ghz.The hard drive in my PB has just gone bust, and I don't have the restore disks for OS X 10.5.Seeing as my MacBook Pro has 10.5, would it be possible to move (via CCC or the like) the OS X from my MacBook Pro onto the new hard drive I've just replaced in my PowerBook? If so, how would I do this? Is it possible to boot from an external hard drive on a PowerBook?By the way, just so you know, I have paid for both Mac OS X licenses.
View 1 Replies View RelatedI have a brand new MBPro15. The SMART status says I have a failing 7,200 RPM HD. Apple sent me a DIY for replacement. I am unable to run time machine for a backup. It receives and error each time. Most likely due to the failing HD. I was able to get all my important files backup to an external HD. Except for all my bookmarks, calendars, settings, etc. I do have a .Mac account with sync. I am hoping I can pull that data off and onto the new OSX. Is that possible? IS there any other way to transfer this important info before I replace the HD with the new one? Can I just make a clone of my current HD and put the OSX on the new HD? Or is a best to do a clean install, than transfer important settings and bookmarks?
View 1 Replies View Related
