Windows On Mac :: Copying Files From Old Windows Machine To New
Nov 25, 2009
I'm copying files from my old Windows machine to my new Mac. On my Mac, I can see my Windows share and I can copy its contents to my Mac. However, I get this error: The operation can't be completed because you don't have permission to access some of the items. Digging deeper it looks like some of my photos are the culprits. But it's not really a permissions issue (File -> Get Info says you can read and write). Some of my photos are not viewable on the Mac (but are viewable on Windows). And there is nothing odd about these photos, they are in the middle of a bunch of other photos I took at same time. Only thing I can think of is these tend to be rotated, but there are plenty of other rotated photos that work fine on the Mac. I will try to attach one here (looks like it's too big 1.8M).
1. Any ideas why these photos give permissions error?
2. Is there any easier way to copy files from Windows to Mac? Every time it runs into one of these files, it stops and I have to figure out where it left off and copy again in smaller bites.
I have 13 files totalling about 4.5GB on my new MBP that I've tried to copy over the network to my Windows PC. The actual copy process itself indicates that all 4.5GB of data has been copied across, but on the Windows PC only 6 of the 13 files actually appear, so somewhere in the process the other 7 files have been 'lost'. Has anyone got any idea what could be going on here and how and where the other files have vanished to even though the MBP indicates the data has been copied over?
I just wanted to ask. Is it possible for me to copy files from a Mac OS to a Windows OS using a pen drive? Will the files be accessible in my Windows station?
I just had a second hard drive replaced on my Macbook pro which I have had a little over a year. After the first HD replacement I purchased a WD external drive to back time machine to. Time machine was set up to back up VM to Mac HD and then back Mac HD up to time machine. I am pretty much tech illiterate when it comes to restoring. I have managed to restore the Mac side of the computer, get the VM(Fusion) installed and also installed Windows. For the life of me I cannot find my Windows files. From all I have read there is a chance there may not be any files but I would like to make sure before I begin the long process of rebuilding.
My macbook pro was stolen a few days ago. I plan on getting a replacement in the near future, but I don't think the current macbook pros are worth it at their prices... I don't know when an update is coming (like everyone else). I may have jumped the gun and bought a windows laptop if all my files weren't saved via time machine.
Is there anyway to get my stuff off time machine and onto windows short of buying a second mac and restoring to and then transfering off to windows laptop?
I have a MBP, backup to Time Capsule by Time Machine.Â
I will have a new MBA, I will would like to transfer Photos / Music from MBP to that MBA. MBA will have a different account as MBP has.Â
I understand it could be as easy as copying whole iPhoto library / Music folder to an external drive or NAS and then copy to MBA. But since I already have everything on Time Capsule, am I able to copy selected files from Time Capsule to MBA directly?Â
I know Migration Assistant could be able to do that but I also heard Migration Assistant could cause some unexpected issues such as permission conflicts, a new created migration account etc... I cenrtainly don't want to mess up MBA. Â
So my question, am I able to directly access Time Capsule just like a NAS via Finder from MBA, and drag and drop selected files from MBP's backups? Are MBP's backups visibile to MBA?Â
Info: MacBook Pro with Retina display, OS X Mavericks (10.9.3)
My question is pretty simple. Can I store virtual machine files on an external disk? I use Parallels 5 and have an Intel X 25 160 SSD and to conserve space I was wondering if I can move the virtual machine file out of Users/Me/Documents/Parallels folder to an external disk and load it from there?
I tried and received an error message. Something about a pvm file not compatible?
When I try to archive my files with Time Machine I get an error message "error disk not available". The external disk is a 1 TB Iomega EGO Portable Hard Drive Mac Edition connected with 2 USB connection to my Mac Book Air with MacOS 10.7.4. I have format the disk in MacOS extended. I have tried to copy file from my internal disk to the external disk & it works correctly.
If I migrate my W7 machine to my Mac mini, will Windows make me reactivate the license? Is that even a big deal? If I use the ethernet cable option, will I need just the regular ethernet cable or a crossover cable?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
Office equiped mixed computers , aslo Windows and Mac, Could we use MacMini server for both machines, working by windows apps and / or to save and work with windows files on MacMini server and with Mac as well?We woud use it for normal office work and get it by internet from other places as wellwindows apps: merchandising, invoice, word, excel, pictures editing, Outlook Express + the Mac apps  Â
I recently switched to Macs and purchased a Macbook Pro(which I love!). I'm still getting used to the OS, but I ran into a problem.
I was using a Windows computer before for my iPod (classic, not sure if that matters). I would like to transfer the songs I have from my windows iPod, onto my new Mac, but I'm not sure if that's possible(I think I may have read on Apple's website you can't switch from Mac to Windows but I'm not sure, but thats besides the point).
I don't really want to download a program to move my songs from the iPod onto the Mac.
As you know, Boot Camp 3.0 allows the window partition to see Mac files and folders without additional software.
I am trying to set up Windows Media Player and Windows Media Center to use on my Xbox 360.
When I tell Windows Media Player to load files from a Mac folder, I can navigate to that folder no problem, but after going through the steps, it fails to load ANY media.
I've been trying to move some files from my Mac HD to Windows partition, but I keep getting the message "The item ___ could not be moved because ___ cannot be modified." Anyone know how to fix this?
I am going to upgrade to Windows 7 sometime soon when it comes out. I have a question though. I know with Windows 7 Pro that one of the features is running XP seamlessly through a Virtual machine. I don't want to fork out an extra 100 bucks, so I am going to just go with Home Premium. My question to you guys is, is there a free third party way to run a Windows XP/Windows 2000 virtual machine with Windows
My co worker is trying to dual boot windows vista on his imac. He ran into a problem with the install code. While he is trying to verify that his code is correct, can't get the windows vista disk out of his machine. What he has told me is when the windows instilation asked for the correct instal code he gets the option to input the correct code or restart the computer. in an attempt to abort the instalation he chose restart. Instead of being able to get to the osx desktop, he is thrown right back to windows loading the instilation files where it prompts for the password. because I too am a new windows convert, I don't know how to help him get his imac to boot back to osx so he can drag the disk image icon to the trash to get the disk out of his machine.
I have a Mac Air running Mavericks on a HFS partition and Windows 7 on a BOOTCAMP NTFS partition. I have some files that I want to read/write from/to both systems. Since OS X can't write NTFS and Windows can't write HFS either, and I don't want to use any 3rd-party tools/drivers, in OS X, I copy those files from NTFS to its HFS partition, make changes, then switch to Windows and sync them back to NTFS.Â
The problem is, after I copied a file from NTFS to HFS in OS X, it seemed ok. But when I switched to Windows, the very copied file in HFS partition had its size changed (bigger) although I didn't make any changes to it in OS X yet. This happens to almost every file I copied, text and binary. For those text files, I tried to open it with EditPlus in Windows and EditPlus reports the correct size on the status bar.Â
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
On Rapidshare, I've download a lot of files such as .rar files on my mac and everything has worked fine. Up until today, I downloaded a few and they are windows files because they have the parallels symbol (Yes I have parallels) but my parallels isn't running. So i went back and tried to download old files that I had previously been opened with Mac OSX and they too are opening as parallel files. I dont understand why all the files want me to download the windows version. The only thing that I changed was i finally upgraded my MacPar Deluxe because there was a new version but that's the only thing. So can someone please help me fix this problem. I dont want to download windows files while on my mac.
This only happens when she copies files between internal hard drives. After copying the files, she verifies that files exist in both locations. She then deletes the files in the old location. Then, newly copied files are missing from the new location.
I've never heard of this happening before, except for with improperly unmounted external drives. I have run disk utility and verified that there are no problems with either drive.
Why does my mac stop downloading files, copying to clipboard, saving files to desktop, etc?
iMac g5 1.9 ghz 17" running 10.5.8. Had a hard drive crash and bought a new one. Loaded new OS leapord. Everything works fine at first, but after the computer has been on for a while, it will stop downlading files, disk verify doesn't work. I can't copy and paste stuff. It seems as if the hard drive is full, but I have only used 32GB of 300GB.
When I restart, it works again, then slowly not. Is it an overheating issue? How do I know if my fan is running? Is it a bad hard drive I put in it? Bought it new with three year waranty.
On several separate occasions, one of our users has had trouble with files "disappearing."
This only happens when she copies files between internal hard drives. After copying the files, she verifies that files exist in both locations. She then deletes the files in the old location. Then, newly copied files are missing from the new location.
I've never heard of this happening before, except for with improperly unmounted external drives. I have run disk utility and verified that there are no problems with either drive.
Could anyone help explain why this is happening or how to prevent it?
I've searched around some but am still confused. if I want to control my bro's xp machine remotely over the Internet from my MacBook pro using osx's built in vnc, what needs to be installed on his end if anything?
I'm sure I'll get attacked from this or told to go buy a Mac, but I am curious if there is a way to run a Mac on my Windows machine. Windows 7 Professional 64 Bit Intel Core 2 Quad CPU Q6600 @ 2.40 GHz 6.00 GB RAM ATI Radeon HD 2600 Pro
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
I currently run Fusion on my iMac but I really would like the try the new version of Parallels that came out this week.
Will I mess anything up by installing the demo version while still having Fusion installed? Of course I wouldn't run both at the same time, just have both installed.
