if im running on OSX and is connected to the internet and I run my win 7 boot camp partition via VMware fusion...
1. will windows on fusion be automatically connected to the internet using the OSx's connection? or is it a separate connection?
2. if yes, what if i disable windows from connecting to the internet, will it still be connected if ran it via fusion?
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies View RelatedI'm a new MAC user and I am getting swamped with info. My question is, what is the best way to install Bootcamp? Should I install MAC OSX Snow Leopard first? Or should I install Bootcamp then Windows first? Then MAC OS X? I'm really new to this and I've tried reading the sticky but there's no "Best way to install BootCamp" even if I google it.
View 12 Replies View RelatedI have an iMac 24" 2.8ghz, 4gb ram, mid 2008. I have a couple of programs that only work under Windows, plus my wife doesn't want to learn Mac (sigh). I've been reading the threads (via mroogle) and looking at the documentation available from both Parallels and VM Ware and I'd like to know if I my understanding of how it works is correct. For Bootcamp, you partition your HD to create a bootcamp partition and OSx puts in drivers that allows you to install/boot windows in that partition and then you simply boot from that partition. This seems to be the closest to a genuine Windows environment. Right?
For Parallels/VM Ware, you install the application and then it runs in an OSx window and you create a virtual machine which installs windows and then it runs under OSx. Then you don't need windows drivers since Parallels/VM supplies the drivers as part of its own code. The virtual machine (64 gb or so) becomes your "hard disk" (I think) and OSx doesn't see the file system from other applications. Parallels/VM emulates the PC bios more or less? So I would need an OEM copy of Windows XP plus the service pack and also VM Ware or Parallels if I choose that route.
I have some problems with starting Windows 7 RC 64bit with WMWare.
I got Windows 7 RC 64bit installed on my Bootcamp Partition.
Windows 7 works fine and everything.
I want get it working with VMware.
I have VMWare 2.0 installed.
Is there a way to set it so that when I enter XP (bootcamp partition) from VMware that instead of having to restart windows every time I can just suspend it like you can with just VMware and windows without the partition?
View 3 Replies View RelatedI'm gonna give my mom my 13" Unibody Aluminum MacBook 2.0GHz with 2GB RAM and a 160GB HDD. She needs to run the Windows version of Quickbooks and I'm wondering whether to set her up in BootCamp, Parallels, or VMWare. She doesn't necessarily need to virtual machine and she probably won't use more than 20 GB, but what are your thoughts?
1) BootCamp?
2) Parallels?
3) VMWare?
I installed Windows 7 through VMWare Fusion's easy setup. Can I use this existing Windows installation to make a BootCamp partition? I know Windows can be used vice versa (BootCamp first, then VMWare), but I already installed Windows 7 with VMware first.
View 7 Replies View RelatedIm thinking about getting Vmware or Parallels using it as a virtual PC to access my Bootcamp partition.
I'm just wondering if this is even possible (im new to virtual pcs).
If it does work, will i be able to access bootcamp directly from booting it natively?
I am purchasing my first Mac this week (iMac 27" i7 8gb ram 1 TB ). I am new to the whole Mac experience. I have a few questions I hope someone can give me the correct answers.
I purchased VMware 3.0, but I would also like to use bootcamp (for when I am gaming). Would Windows need a separate installation copy for each? I was concerned about the Windows activation issue. I am not sure if need to activate twice or if Windows 7 will allow it, once for bootcamp and then once for Vmware?
I purchased Windows 7 64 bit upgrade. I am currently running on my PC Windows Vista 64 bit and I have a new OEM copy of XP home 32 bit (unused). I plan on using the already registered copy of Vista to install on my MAC then use the Windows 7 upgrade. Will that work? Will I need to activate Vista before I can use the upgrade?
Can I use an external drive to run windows from VMware (either firewire or USB) or should I invest in the 2 TB upgrade?
I have windows 7 installed via Bootcamp. Then I installed VMware and had it point to my BC partition. I never noticed it doing this before, but now it keeps telling me that "this copy of windows not genuine" when I run in VM (not sure if the Bootcamp partition - version says this; I'll test it now) I was fairly confident that there was no licensing issue since the "point to BootCamp" option even exists.
View 16 Replies View RelatedI am considering getting my first mac (MBA) but I have an external hdd with NTFS format. I've read that OSX can read files from NTFS but cannot write to it. What if I run Parallels/VMware using the bootcamp partition? Can I then write files to the external hdd?
View 16 Replies View RelatedThis will outline a simple and easy method to install the windows 7 build 7000 to a boot camp partition, using only vmware fusion 2. This is novel because it can be accomplished without a superdrive and without burning a dvd.
1. Use boot camp assistant to make a windows partition.
2. Mount the windows .iso file in fusion and set the bios (F2 during virtual machine boot) to boot from the virtual dvd-drive.
3. Run the windows install
4. When windows wants to restart the first time, shutdown the virtual machine.
5. Reboot the mac and boot the windows partition, boot camp style.
My MBP seems to be stuck on "VMware Fusion is preparing your Boot Camp partition to run as a virtual machine. This may take a few minutes. This will only happen once." The bars are still moving and it doesn't appear to have crashed but it's been running for over 2 hours.. is this normal or should I restart it?
View 2 Replies View RelatedMy first Bootcamp partition had a problem with installing my printer drivers, so I decided to just scrap it (i.e. I used disk utility to erase [wrote zeroes] that partition). I then used the Bootcamp assistant to create a new partition, and I installed Windows 7 again on the new partition. I have everything up and running on the new partition, and it works perfectly when I re-start in bootcamp.
However, when I try to load it in Vmware Fusion, it seems to be searching for the old partition. How can I get Vmware to boot up the new partition? Right now it says "No bootable device detected."
Which would be the best option? Bootcamp or VMware Fusion 3.0? and does bootcamp slow down the mac side of the OS ( such as boot up times etc ) What are the pros and cons to both?
View 13 Replies View RelatedI have windows 7 installed in bootcamp.
I made it a VM for Fusion 3. Installed VMWare Tools.
If I wanted to transition to Parallels 5...
Would I (most likely), uninstalled VMWare Tools, reboot.
Then tells Paralells to make Bootcamp a VM.. then install the Parallels Tools.
My basic wonder, is can I do this. or will I have to fully reinstall the entire bootcamp partition to make the switch.
I've been looking everywhere for an answer to this question and I'm really stumped. I've installed Bootcamp as I've realised Fusion is no good for gaming, however. I can't download all of my games again off steam due to a cap on my internet.
I've looked everywhere and is there anyway I can copy and paste the program files from my current virtual machine onto my new bootcamp machine?
I am an architect and I will be mostly using my new imac to work on Autocad 2010 along with a couple of other windows based applications. I understand the concept of the three methods of using windows but I do not know which would provide the best performance whilst working on Autocad, without it becoming a laborious task to load it up everyday.
I will be rocking dual monitors so I quite like the idea of Parallels or VMWare so that I can have Windows open on one monitor and Leopard on the other. But will this have a negative effect on the performance of Autocad? Also, which of these two is the better?
Is there a way to use my bootcamp vista through vmware fusion or another similar virtual machine app?
View 1 Replies View RelatedI am using NAT mode on the VMWare Fusion running Windows XP and am not able to get out to the Internet using IE or Firefox. I am able to get out to the Internet just fine from the host OS (Leopard) via Firefox. I can see on the task bar (lower right corner) the network connection lights going but only one of the computer icons light up as if there is a transmit but no receive. Usually if there is transmit and receive I'll see both computer icons lighting up.I've tried doing a ipconfig /release and /renew but to no avail.
From a dos prompt I've tried pinging "yahoo.com" but with no success. The strange thing is that when I used this VMWare image last a few weeks back it was fine. Not sure what's changed.
this is a major problem for me. I just installed ubuntu on my mac via boot camp, and I can't find how to set up wireless internet! Once, after installing windows, the same problem occurred. I'm not sure whether this version doesn't support airport (ubuntu v10.04.1) or I need the snow leopard drivers (but I can't because it's a .exe file).
View 5 Replies View Relatedcan I install a bootcamp partition with windows 7 on a external Hard disk?? does the connection via USB will do some difference? I have a 2.26 MBP 13" with 160 Gb of HD then I don't want to reduce my actual internal HD and think in the external HD
View 2 Replies View RelatedI cannot seem to connect to the wireless connection when running bootcamp. It says something like the signal is too weak or whatever, but when I run it on OS X, it works perfectly fine.
View 2 Replies View RelatedI can hook up and get wireless internet on OS X easy no problems. XP I can also hook up and get internet easily on XP. The problem is, all of a sudden it will cut out and stop working after awhile, then I have to select and repair my connection to get it to work again. I know its super vague but thats all I got.
View 4 Replies View RelatedI've just installed XP on my Macbook Pro (No BootCamp, just Windows XP), and I'm currently trying to figure out how to set up my network connection. I'm assuming that I will need to install drivers?
View 2 Replies View RelatedI'm going to tether my Samsung Omnia phone with my laptop, but I want my iMac to connect to the laptop to use the tethering wirelessly. How do I do that?
Basically it will be set up like this:
Verizon 3G network > Omnia > Windows laptop [Vista] > iMac
I know how to get tethering set up and everything, but I don't know how to connect my iMac to my laptop through wireless.
I'm newbie an just using apple the first time in my life. I bought imac i5 2.7 ghz..Can someone help me about my problem? I already check with my inet provider that my connection got no problem at all. But i felt that it is slow and the worse case again when back to my old windows notebook, i got no problem with the connection. The imac performance itself got no problem.
Info:
iMac, Mac OS X (10.7.3)
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
View 6 Replies View RelatedRunning Vista on my mac, when I switch to windows it cannot pick up a wireless card.
View 6 Replies View Related
