Windows On Mac :: Made New Bootcamp Partition; VMware Cannot Load It?
Jul 26, 2009
My first Bootcamp partition had a problem with installing my printer drivers, so I decided to just scrap it (i.e. I used disk utility to erase [wrote zeroes] that partition). I then used the Bootcamp assistant to create a new partition, and I installed Windows 7 again on the new partition. I have everything up and running on the new partition, and it works perfectly when I re-start in bootcamp.
However, when I try to load it in Vmware Fusion, it seems to be searching for the old partition. How can I get Vmware to boot up the new partition? Right now it says "No bootable device detected."
View 2 Replies
ADVERTISEMENT
Jun 8, 2010
I made a Boot camp partition for windows 7 and today I deleted it. Now when I reboot my MBP, if i don't press Option key it will hang and then say No boot device could be found or something along those lines. Everything works fine if I use the Option key and manually select Macintosh HD.
View 2 Replies
View Related
Aug 21, 2009
I have some problems with starting Windows 7 RC 64bit with WMWare.
I got Windows 7 RC 64bit installed on my Bootcamp Partition.
Windows 7 works fine and everything.
I want get it working with VMware.
I have VMWare 2.0 installed.
View 5 Replies
View Related
Sep 25, 2009
Is there a way to set it so that when I enter XP (bootcamp partition) from VMware that instead of having to restart windows every time I can just suspend it like you can with just VMware and windows without the partition?
View 3 Replies
View Related
Jul 2, 2010
Im thinking about getting Vmware or Parallels using it as a virtual PC to access my Bootcamp partition.
I'm just wondering if this is even possible (im new to virtual pcs).
If it does work, will i be able to access bootcamp directly from booting it natively?
View 1 Replies
View Related
Sep 4, 2009
So I am trying to open up my bootcamp partition (running windows 7) in VMWare and I get this error message: Cannot open the disk '/Users/brandonquirarte/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/%2Fdev%2Fdisk0/Boot Camp partition.vmwarevm/Boot Camp partition.vmdk' or one of the snapshot disks it depends on. It was working just fine before the upgrade to Snow Leopard but I am not sure if that has anything to do with it. I had to reinstall Windows 7 after I tried installing the Bootcamp 3.0 drivers so that may be more of the issue. I didn't test to see if would work still when I upgraded to Snow Leopard.
View 3 Replies
View Related
Jul 1, 2009
My MBP seems to be stuck on "VMware Fusion is preparing your Boot Camp partition to run as a virtual machine. This may take a few minutes. This will only happen once." The bars are still moving and it doesn't appear to have crashed but it's been running for over 2 hours.. is this normal or should I restart it?
View 2 Replies
View Related
Nov 5, 2009
I have windows 7 installed in bootcamp.
I made it a VM for Fusion 3. Installed VMWare Tools.
If I wanted to transition to Parallels 5...
Would I (most likely), uninstalled VMWare Tools, reboot.
Then tells Paralells to make Bootcamp a VM.. then install the Parallels Tools.
My basic wonder, is can I do this. or will I have to fully reinstall the entire bootcamp partition to make the switch.
View 7 Replies
View Related
Jul 3, 2009
how to load your bootcamp partition with Parallels.
View 6 Replies
View Related
Jul 13, 2009
It says that the drive has changed and I have to unmount and then remount it, but i don't really know how to do that and it doesn't seem to work
View 4 Replies
View Related
Aug 9, 2009
im kind of new to this and i was trying to get bootcamp to run and also the windows partition that runs on bootcamp through vmware fusion. ive installed and uninstalled like 12 times now in 2 days and its driving me nuts. no matter what i do i cant get it to work. maybe someone on here can give me some tips because im lost.
View 6 Replies
View Related
Aug 26, 2010
I erased my bootcamp partition this morning thinking that was the same as deleting the partition - how do I actually delete the partition and combine it with my MAC OS partition now? I can't do it thru bootcamp
View 4 Replies
View Related
May 29, 2010
I'm a new MAC user and I am getting swamped with info. My question is, what is the best way to install Bootcamp? Should I install MAC OSX Snow Leopard first? Or should I install Bootcamp then Windows first? Then MAC OS X? I'm really new to this and I've tried reading the sticky but there's no "Best way to install BootCamp" even if I google it.
View 12 Replies
View Related
Nov 11, 2010
I recently made a clone of my Windows XP Pro SP3 installation (its roughly about 14GB according to Finder/WinClone) so i made a 80GB partition on my 320GB drive and it gives me this error message:
the WinClone came from a 500GB internal drive and ive gotten winclone images to restore to a MBP before but not sure why its giving me this error code, anyway to restore the image to the new partition (which was created with Bootcamp) as i no longer have access to the old machine it was running on.
View 24 Replies
View Related
Apr 13, 2009
I have an iMac 24" 2.8ghz, 4gb ram, mid 2008. I have a couple of programs that only work under Windows, plus my wife doesn't want to learn Mac (sigh). I've been reading the threads (via mroogle) and looking at the documentation available from both Parallels and VM Ware and I'd like to know if I my understanding of how it works is correct. For Bootcamp, you partition your HD to create a bootcamp partition and OSx puts in drivers that allows you to install/boot windows in that partition and then you simply boot from that partition. This seems to be the closest to a genuine Windows environment. Right?
For Parallels/VM Ware, you install the application and then it runs in an OSx window and you create a virtual machine which installs windows and then it runs under OSx. Then you don't need windows drivers since Parallels/VM supplies the drivers as part of its own code. The virtual machine (64 gb or so) becomes your "hard disk" (I think) and OSx doesn't see the file system from other applications. Parallels/VM emulates the PC bios more or less? So I would need an OEM copy of Windows XP plus the service pack and also VM Ware or Parallels if I choose that route.
View 13 Replies
View Related
Dec 27, 2009
I'm gonna give my mom my 13" Unibody Aluminum MacBook 2.0GHz with 2GB RAM and a 160GB HDD. She needs to run the Windows version of Quickbooks and I'm wondering whether to set her up in BootCamp, Parallels, or VMWare. She doesn't necessarily need to virtual machine and she probably won't use more than 20 GB, but what are your thoughts?
1) BootCamp?
2) Parallels?
3) VMWare?
View 4 Replies
View Related
Feb 15, 2010
I installed Windows 7 through VMWare Fusion's easy setup. Can I use this existing Windows installation to make a BootCamp partition? I know Windows can be used vice versa (BootCamp first, then VMWare), but I already installed Windows 7 with VMware first.
View 7 Replies
View Related
Jun 17, 2010
if im running on OSX and is connected to the internet and I run my win 7 boot camp partition via VMware fusion...
1. will windows on fusion be automatically connected to the internet using the OSx's connection? or is it a separate connection?
2. if yes, what if i disable windows from connecting to the internet, will it still be connected if ran it via fusion?
View 1 Replies
View Related
Sep 3, 2010
I just uninstalled VMware Fusion from my MBP. However, I don't seem to see that the 40GB I dedicated to the Windows 7 I installed is freed. Please, how do I do that? I need the 40GB to make my already slow 160GB 13'' MBP faster!
View 2 Replies
View Related
Oct 13, 2008
I'm currently running Parallels 3.0 (XP Pro) off of a Boot Camp partition on my Macbook Pro. I'd like to give VMWare Fusion an audition, and am wondering if I can run it off that same BC partition that Parallels uses -- or if that will create some kind of conflict that might damage the partition. I'm not talking about having Parallels and VMWare running _simultaenously_ -- only installing them both to use the same partition.
View 8 Replies
View Related
Aug 31, 2010
So my iMac came with a 1TB hard drive and I installed Windows 7 x64 but only gave it some 93GB. I have a two-prong question:
Can I add a third partition to my drive after I partition for BootCamp? My main partition ("Macintosh HD" by default) is over 900GB large and I'd really like to cut that up into 2x450GB, for example, in addition to the 93GB BootCamp partition.
Second, once partitioned, is it possible to resize the BootCamp partition to make it bigger after it has been set up?
View 1 Replies
View Related
Nov 20, 2009
I am purchasing my first Mac this week (iMac 27" i7 8gb ram 1 TB ). I am new to the whole Mac experience. I have a few questions I hope someone can give me the correct answers.
I purchased VMware 3.0, but I would also like to use bootcamp (for when I am gaming). Would Windows need a separate installation copy for each? I was concerned about the Windows activation issue. I am not sure if need to activate twice or if Windows 7 will allow it, once for bootcamp and then once for Vmware?
I purchased Windows 7 64 bit upgrade. I am currently running on my PC Windows Vista 64 bit and I have a new OEM copy of XP home 32 bit (unused). I plan on using the already registered copy of Vista to install on my MAC then use the Windows 7 upgrade. Will that work? Will I need to activate Vista before I can use the upgrade?
Can I use an external drive to run windows from VMware (either firewire or USB) or should I invest in the 2 TB upgrade?
View 3 Replies
View Related
Jan 30, 2009
Used migration assistant to move my Blackbook apps and settings to the Air using a Time Machine backup from my Time Capsule - wirelessly. Two hours later (not terrible) and I'm using my Air with all my apps and setting - fantastic.
Question: My Blackbook also has a Bootcamp partition running Windows - is there a way to take that image and migrate it to my MB Air? I'd rather not have to purchase the Superdrive and re-install/setup the Windows OS on my Air....
View 8 Replies
View Related
Oct 26, 2010
I have windows 7 installed via Bootcamp. Then I installed VMware and had it point to my BC partition. I never noticed it doing this before, but now it keeps telling me that "this copy of windows not genuine" when I run in VM (not sure if the Bootcamp partition - version says this; I'll test it now) I was fairly confident that there was no licensing issue since the "point to BootCamp" option even exists.
View 16 Replies
View Related
Nov 11, 2010
I am considering getting my first mac (MBA) but I have an external hdd with NTFS format. I've read that OSX can read files from NTFS but cannot write to it. What if I run Parallels/VMware using the bootcamp partition? Can I then write files to the external hdd?
View 16 Replies
View Related
Feb 9, 2009
This will outline a simple and easy method to install the windows 7 build 7000 to a boot camp partition, using only vmware fusion 2. This is novel because it can be accomplished without a superdrive and without burning a dvd.
1. Use boot camp assistant to make a windows partition.
2. Mount the windows .iso file in fusion and set the bios (F2 during virtual machine boot) to boot from the virtual dvd-drive.
3. Run the windows install
4. When windows wants to restart the first time, shutdown the virtual machine.
5. Reboot the mac and boot the windows partition, boot camp style.
View 11 Replies
View Related
Oct 27, 2009
Which would be the best option? Bootcamp or VMware Fusion 3.0? and does bootcamp slow down the mac side of the OS ( such as boot up times etc ) What are the pros and cons to both?
View 13 Replies
View Related
Nov 23, 2009
I've been looking everywhere for an answer to this question and I'm really stumped. I've installed Bootcamp as I've realised Fusion is no good for gaming, however. I can't download all of my games again off steam due to a cap on my internet.
I've looked everywhere and is there anyway I can copy and paste the program files from my current virtual machine onto my new bootcamp machine?
View 1 Replies
View Related
Dec 26, 2009
I am an architect and I will be mostly using my new imac to work on Autocad 2010 along with a couple of other windows based applications. I understand the concept of the three methods of using windows but I do not know which would provide the best performance whilst working on Autocad, without it becoming a laborious task to load it up everyday.
I will be rocking dual monitors so I quite like the idea of Parallels or VMWare so that I can have Windows open on one monitor and Leopard on the other. But will this have a negative effect on the performance of Autocad? Also, which of these two is the better?
View 5 Replies
View Related
Aug 5, 2009
I have a 13" MBP with a 250 gb hd, I partitioned the HD 25gb for Windows XP shortly after I bought it. I was unable to install my copy of windows, contacted apple after exhaustive search as to why... Long story short, I now have Vista to install... When I went back to Boot Camp Assistant; partition was gone. Researched... ran disk utility, repaired and erased partition. Bootcamp HD now shows up in desktop, still not in bootcamp assistant. Since I am unable to locate in assistant; would there be any problems with just installing Vista off the install disk by restarting? Any ideas what to do if this is not a good idea (short of restoring)?
View 4 Replies
View Related
