I want to install windows XP on my macbook. I have a license key but I lost the install disk. Anyone know how I can just get the software without buying another copy?
View 4 RepliesI tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
View 3 Replies View RelatedI searched for a while trying to find the answer but did not find it. I just installed Vista Business via Bootcamp. I am not able to access the internet or anything. If I read the help stuff right I need to use the OSX install disk to install the drivers. The problem is, I don't have the install disk. Is there any other way to get the drivers? Or am I just missing something easier?
View 5 Replies View RelatedI want to clean install windows 7 after formatting disk. This doesn't sound like a great idea, but I need this for couple of engineering softwares to work. I don't want to spend my nights in computer cluster or at friends pc...
I have heard, I will encounter following issues:
- battery will drain faster
- graphics driver for x64-bit version
- camera
- iPhone backups and syncs (music, video, cal, contacts and apps)
- I would need a external mouse for right click.
I can live with all of the above problems except graphics card drivers. Can anyone provide feedback or useful links they have refered to installing Windows 7?
Is it possible to install Windows 7 on an internal disk via Boot Camp and then remove this disk and use it as an external drive? I have two drives for my mini, one in use and one in an external case; unfortunately, neither have room for everything plus Windows. If the answer to this question is no, then I'll buy a bigger drive. I'd just like to avoid this if possible (I already have a ton of external drives and not enough ports to plug them into).
View 4 Replies View RelatedI have a 2010 15" MacBook Pro 2.4 i5 that I am trying to install Windows 7 on using BootCamp. I have installed a partition using BootCamp of 45GB but once it prompts me to insert the Windows disk, I insert it but after a few seconds the machine ejects the disk without ever mounting or seemingly recognizing the disk.
I am trying to install Windows 7 Ultimate 64bit from a disk.
Can anyone offer any insight or help me figure out what the problem is? I have already tried rebooting and that doesn't work.
I am looking to install Adobe CS5 from a disk for a windows pc onto my macbook pro. Can this be done?
View 2 Replies View RelatedI have seen other posts and I'm concerned that I didn't have all the info that I need. I would like to install Windows Server 2003 R2 64-bit on my IMac at home using VirtualBox. VirtualBox is like Parallels or VMware and is free. Where is the best place to get a Windows Server install disk and is there anything that I should look out for when installing it on my IMac?
View 4 Replies View Relatedso i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
View 2 Replies View RelatedDo I? If so where the hell is the disk. Just got my Macbook a couple days ago.
View 2 Replies View Related- First Disk named Applications install DVD
- Second Disk Mac OS X install DVD
I'm new to macs. Which one it would really help.
I have just installed Windows vista onto my Mac but when using boot camp it only gives me the option of creating a Windows 7 install disk.where I can get a Windows Vista install disk?
Info:
iMac, Mac OS X (10.7.3)
I have a macbook pro 13 " and I shall like settling on an external hard disk ( SSD) Windows 7 not to split up the main disk.
View 1 Replies View RelatedIS there anywhere else i can get the windows drivers for mac hardware other than the leopard install disk?
View 3 Replies View RelatedI've successfully installed XP on my Macbook (Late 2009) and now need to install the drivers to get Network connectivity etc. However I don't have my mac disc at hand as I am away travelling at the moment. Can I download the drivers either from my mac or from the internet to USB, then transfer and install them into XP? I have the latest version of OSX and am up-to-date with everything afaik. Running XP Pro SP 3.
View 15 Replies View RelatedCan you install XP/Vista on the MBA using remote disk during the bootcamp installation process or do you have to have the external super drive attached?
View 6 Replies View RelatedI've tried to install the network drivers via the original disk that came with my computer, the bootcamp 2.1 disks, and even the HP Broadcom drivers, where none of them worked, does anyone have any ideas on how to solve this problem, Ethernet works perfectly btw.
View 5 Replies View RelatedI'm very new to macs and I've been able to purchase most of the applications I need to use in mac formats (quickbooks, office etc.) but there are some things that still need windows like all of the software for my Garmin units as well as some marine navigation software. My question is rather then having to purchase more software, and give more money to MS, can I use a copy of windows that came with one of my old dell or vaio laptops to run windows on parallels so I can run those few programs i need?
View 4 Replies View RelatedOk so after going through 400 issues on the install I now am succesful. I used 32GB Partition. 12GB = Windows folder. Logically I should have almost 20GB left. But no! I have 6.89GB left! Donde esta 20 GIGS? My programs folder has only A few hundred MB in it. I have to get this space back or I know I have to go threw the whole parition/install/configure process again.
View 1 Replies View RelatedI have a late 2008 uMB and my friend has a late 2008 uMBP. Is it possible to use my restore disk to install the bootcamp drivers on his computer after he installs windows? Are the drivers all the same, or are they hardware specific like they are with the OSX install? Any help is appreciated,
View 1 Replies View RelatedI noticed that in disk utility in the install disk, you can drag to change a partition size. Does this erase data?
View 2 Replies View RelatedI would like to install windows 7 ultimate 64 bit on my mac on a partition created with bootcamp to play many MMOs that are not compatible with mac. It 's safe or need a safety backup ?
Info:
MacBook Pro (15-inch Early 2011), Mac OS X (10.7.3)
I am trying to install Windows 7 Home Premium 64-bit on my MacBook Pro purchased late 2011 and running Lion. The Windows software was purchased online and downloaded. I then copied the .iso file to a dvd. When I try and install Windows through Boot Camp it doesn't recognize that there is a disk in the drive to install Windows. I sure hope I didn't waste my money. Has anyone installed Windows 7 from a OEM download?
Info:
MacBook
Pro, Mac OS X (10.7)
I'm looking to install a Windows partition on my MB to revisit my Counter-Strike days. Does Boot Camp require a physical disk or can I use an ISO image for the install?
View 5 Replies View RelatedHow do I launch disk utility from the Snow Leo install disk?
View 2 Replies View RelatedI have a dual 2ghz G5 that i wanted to clean off and start fresh. I wiped the drive with disk utility and tried to install os from tiger install dvd. G5 keeps hanging at install and also at disk utility. I've swapped both the osX install dvd disk and the entire dvd drive, but still hangs at os load or utility.
View 3 Replies View RelatedI got tiger install discs for my emac but I cant get it to run the install. I tried putting the disc in and clicking the restart button on the screen that says "Welcome to Mac OS X 10.4 Tiger", but when I click it it just restarts my computer and does nothing. I then tried the alternate install it did the same thing it did nothing but restarted my eMac. I then tried restarting my computer while holding c key nothing once again. Then I tried holding down apple, option, f , and o keys and then typed in cd boot and also tried cdrom boot nether of them worked so i restarted and tried dvd boot/dvdrom boot nothing worked on all the occasion i got a grey screen with a circle with a line through it. What do I need to do to get these install discs to work?
View 9 Replies View RelatedSearched the archives but no luck so far. My old PB G4 is running 10.4.11. When I installed the OS, I chose not to install iPhoto and iMovie because I didn't think I'd need them on this machine. I'd now like to add them, but am not sure how to do it without wiping the hard drive and starting completely from the beginning. There's got to be an easier way...right?
View 4 Replies View RelatedI need to do repair my disk on my 10.6.4 machine but am wondering if I can do so with my 10.5 Install DVD or if I need to wait until I get home and do it with my 10.6 upgrade dvd?
View 2 Replies View RelatedI have recently done a Time machine back up of my MB Pro 15" then wiped my hard drive trying to clean it up so I could install Windows 7 with Boot Camp. I had my original Install Disk which I forgot was Tiger, Having used one of my brothers company licenses to upgrade to Leopard but that disk is now with him in another country. So now I can not restore from my Time Machine backup. I have a Leopard Install disk for a Macbook Pro 13" which I also own. Is it possible to use this disk to re-install Leopard on my 15"?
View 3 Replies View Related