Reading on the microsoft support pages it says you need to boot from the startup disk to do the system re-install, but I can't seem to do this. I tried to just leave the disk in, then restart in windows, but it just spit the disk out. Then I tried leaving the disk in and holding down the option key and clicking on the startup disk, then all I got was the blank windows screen with the line in the corner. how to do the reinstall?
I have a Macbook Pro and I'm hoping to install Windows Vista via Boot Camp. Is it possible to do this with a Dell reinstallation DVD that came with my Dell laptop?
I just had to re install mac os x 10 but after I did I was not able to log in as it seems that my user details have been erased. So I started up from the cd rom again and navigated to the password utility there I tried to change my password but the only user option was system administrator (root) nothing else!.
I hv macbook pro 13 inch early 2011 with having maverick osx but it been booting slow since month or two, i already hv backup of entire hdd, I want to format hdd and reinstall same osx but i dnt have osx disc to install (i didnt get with mac).
I just did a restoree and reformat of macbook. I have installed all the programs that were on before but do not have teh Mac Office disk and product key to reinstall it. I saved the officepid.plist file from system before refromat. I thought I could just install the trial version and then replace this file in the system. It is not working though.
So I currently have a late 2008 MacBook Pro. I may be getting a new iMac for Christmas. My question is, is there a way to basically transfer all of my files/programs/etc. to the new Mac without having to reinstall everything? The iMac will become my primary computer, and the MBP will become kind of a sitting on the couch/travel computer. This is the first time I will be upgrading Macs, as the MBP was my first non-PC computer.
It looks like I have to reinstall my OS. Does anyone know if you 'must' erase your drive when reinstalling OSX? I don't even know if my drive is there still but want to know in case I can save all of my data that has not been backed up.
MacBook pro 2012. I had to reinstall ML due to extreme slowly ness. The bar has progressed and is stuck at 34 min ( the download completed though).It has been stuck for more than 3 hours now.
Info: MacBook Pro (13-inch Mid 2012), OS X Mountain Lion (10.8.5)
I have an old iBook that I just want to completely wipe clean and install windows XP on (I know...blaspheme). Before people start questioning why I would do such a thing...it's only because I need the laptop for DJing in which I have an external sound card that only works with Windows. The main problem is that the CD drive doesn't work so I am uncertain how to go about erasing my hard drive and installing XP via USB.
Is it better for me to buy the upgrade for windows 7, from vista to windows 7 or to buy the full copy? If i buy the fully version, should i get rid of my pardon, and re-do it with bootcamp, or should i just do it over my current pardon? (Vista) I just want the best way, less pain, less anger. Im willing to pay more for full IF IT IS THE BEST way to do it.
so i have a windows XP professional disk, SP2 and all. i am trying to install windows, i get as far as partitioning the disk, but once it says "please insert XP disk" i do that, and it will think for a few minutes, and make a loud noise [coming from the mac] then a message pops up and says 'please insert installation disk.' the disk is brand new, what am i doing wrong? should i be partitioning the windows side larger?
i have my aluminum 2.4GHz 4gb RAM aluminum macbook with the geforce 9400m. and i was wondering. is DirectX 9 better then DirectX 10?. even if the difference is only 8 FPS it still counts.(really the only game im going to play is elder scrolls 4 oblivion)
just trying to get back into Windows 7 after installing it via Boot Camp. Only thing is that holding down the option key during restart does nothing, and although the partition in which Windows 7 is installed under shows up in finder, I am unable to view it in system preferences so that I can boot from it. Any advice?
Ok, Here is the scoop. I am trying to get Wifi to work on my macbook while on XP. When I put in the disk and it says "The package requires a newer version of Windows Installer. Would you like to update?" I say yes and it says "The requires resoruce update is missing." and if I click no it says "The operation is aborted." or something.
I just purchased a new iMac (2.66 c2d & 4gb of ram), Parallels 4, and Windows XP. I would like to get great performance whenever I use Windows XP and would like to know which installation procedure would help accomplish that.
Would Parallels provide me with a better user experience by installing Windows directly via Parallels OR by having Parallels utilizing a Boot Camp Partition? Which is better and why? Also, how much memory should I allocate to Parallels/Windows XP?
Last night I installed VMWare Fusion and Windows 7 on my Unibody MBP running SL. When I use Fusion, my computer slows to a crawl. I spent a few hours getting Windows set up and installing software last night.
I would like to try using Boot Camp instead, but do not want to lose all of the software and files that I have installed. Is it possible to set up Boot Camp, and keep the same Windows setup?
A question about windows 7 and a Mac pro 3.1 edition 2008. I have installed windows 7 and all is fine and dandy everything works, except in the bottom right hand corner there the error flag showing on the tool bar.
This is the error.
Apple Memory Controller GPE event is not compatible with windows 7.
Im having trouble with VMware.. If I set the wireless network connection to NAT, the internet works, but my xbox 360 wont show up in the media streaming options in windows media player. However, if I change the network settings to bridged, I lose my internet connection (well.. sometimes it works.. 80% of the time it doesnt..) Connecting to bridged is the only way I can connect to my 360, and only some of the time where the internet will work. Is there a way to fix the problem with bridged or NAT so they both work together?
hi! i'm planning to install windows 7 64-bit in my mbp, problem is i looked at the requirements needed and it stated that i needed boot camp update 3.1. i checked my boot camp version and it stated that i had 3.0.1, tried using software update, but states that i had no updates available. what should i do? and what else do i have to keep in mind while installing windows using boot camp. thanks in advance!
I burned numerous dvd's with my old Toshiba laptop for all of my videos and such with Windows XP. Now after my Toshiba crapped out and I switched to a Mac I was wondering why when I put the DVD into the laptop (MacBook Pro Intel processor) why I can only see the name of the dvd and not the contents. I hope someone can help me since I hate having to boot up Windows in Parallels and then play using Windows or drag it to my mac partition since this takes time and I just really hate having to see Windows load on my Mac. Anyones help is greatly appreciated.
I had a Windows based PC a couple of years ago that had crashed. So recently i tried to put the files from my old hard drive from my Windows computer to my Mac. In order to keep track of what i have copied and what I haven't i thought it would be good to delete the stuff of my windows hard drive once it was copied. However, it doesn't let me delete anything of the Windows drive since it is set to read only. Is there a way around this? i've tried everything i can think of, but haven't found a soluti
i'm using macosx 10.6.4 and bootcamp assistant 3.1
now here is the problem my windows 7 is infected with virus (thats why windows suck big time) and i need to reformat my windows 7 and reinstall a new windows 7.
how am i supposed to do it? insert the installation disk and do like how we initially installed windows 7? just format the partition and reinstall again? i just want to make sure so i ask before doing anything.
or can i do this? i use winclone to restore? any1 have any idea? i'm new to all this i dont know how to do it. i have backup using winclone but how do i do it? do i still need to format then only use winclone?
If I migrate my W7 machine to my Mac mini, will Windows make me reactivate the license? Is that even a big deal? If I use the ethernet cable option, will I need just the regular ethernet cable or a crossover cable?
I've tried re-installing and updating every possible graphics related driver for Windows 7 i cannot for love or toffee get the bloody thing to even recognize my display. I am using a 26" tv as an external display, it works on OS X (very easily), windows XP (also very easily) and even Vista (also easily) and connecting through a DVI/HDMI connector. Why not windows 7? I've scoured the web for answers but can't find anything. Is anyone at least in the same boat as me? I really need this solved soon
I have a macpro with OSX on one drive and windows 7 on a partition of another drive. Both systems work fine and I boot into windows by holding the option key down. What is odd is if I go to the system preferences startup disk my windows install does not show up. I did move my windows partition a while ago to a new drive. I used bootcamp to create the partition and winclone to move the data. It's not a big deal not having the option in the preference pain but would be nice. If I am in windows and go to the bootcamp control panel both OS X and Windows are there.
I use to be able to select the vista partition to restart into from the configuration pages in leopard on my macbook pro, but now my bootcamp partition is missing. I have to hold the option button to manually select the windows partition and then load into windows. Some setting somewhere must be lost. Does anyone know how to restore it?
I'm running Windows vista ultimate on my Imac and lately the mouse started acting weird on Vista, it's jumping around and moving unpredictable,and also i use windows in spaces, and i can't switch to spaces anymore until i click control + command, please let me know what the problem is, ohh i'm running a USB G9 Logitech mouse.
Does anyone know or have the same problem where pressing the F7, F8, F9 keys (which are previous, stop/pause, and forward) doesn't work in iTunes unless iTunes is the "active" window? I know that in OS X that if i pressed those buttons, it would do it even if I was in another application, but in the Windows 7 version it won't do it if another application is "active." Also, the same applies to the Apple Remote.
