Windows On Mac :: Blank Screen When Trying To Install XP SP2?
Oct 29, 2009
I am trying to set up boot camp on my new mac mini. The primary reason is that 10.6 intel macs don't support my version of mac photoshop (Photoshop 7). I have an XP version of photoshop installed on my old laptop, and want to boot XP on my mac and move it over. However, when I tried to install Boot Camp, and re-started with the windows CD in from Boot Camp, I had a gray screen for a bit, then a blank screen.
I have a brand new Mac Mini, with OS X 10.6, and I set up the boot camp partition successfully. My windows CD is XP with SP2 as apple claims is required.
Additionally, I have an external hard drive with a .bkf file on it from a backup of my old PC laptop that has photoshop in it, but I can't extract that to my BOOTCAMP drive, at least without windows already installed on it.
I tried some other windows CD's, and a windows DVD that are supposed to be bootable borrowed from friends, using the boot camp application, with the CD in, at least XP SP 2, and I still got a blank screen as it re-started, and thus have been unable to install windows.
Is there another way I could install windows? Perhaps from my .BKF file? Is there something I might be doing wrong? I do have an older monitor, a viewsonic 17 inch, and I'm using an apple adapter. Could it be that windows install CD's don't support my graphics card? If so, how am I supposed to install windows? Also, my keyboard doesn't seem to be recognized either. It is a macally ikey extended keyboard, and I can't even get the caps lock light to turn on while it is trying to load of the windows XP disk with boot camp.
My bootable drive is a JBOD (concatenated array) of two internal disks. Therefore I cannot use Bootcamp. I have placed a third blank drive in the third hard drive bay. I have my download of the Windows 7 beta, which I burned to a bootable disk using Disk Utility (.cdr file). Now, might any of you in the audience be able to inform me of what I should do to get the Windows OS from the bootable disk onto the completely blank internal drive?
Ok guys, so here is the story, i just bought the 500 GB Blue Scorpio, ran the Time Machine back up on an external hard drive and wanted to install the 500 GB on my macbook, inserted the Mac OS CD and in the section where it asks where you want to install the Mac OS, i didnt see anything it was blank and it didnt give any options or anything.so now i installed the old hard drive and i am using that one, what am i supposed to do ?
My problem is taht when i installed windows xp, which im thinking is SP1 cuz its so old, i think i partioned mac os x and now when i try to turn on my MBP all that happens is a white screen. and if i press option key no hardrives or systems show up even Mac OS X please im stuck:/. Also windows xp or mac os x is not loading up so im stuck on a white blank screen
Just got the new iMac quad core i7, purchased Windows 7 Home Premium and having trouble getting it to install using Boot Camp it goes through all the steps I partitioned 350 gig then formatted went thorough the install steps, it reboots and finishes the install, then reboots but nothing happens its just a black screen
I have an aluminum Macbook from late 2008, model A1278. I just had to replace the hard drive, and need to install an OS on the currently blank HDD. Problem is, my CD drive doesn't work, so I can't just install from a disc. I had installed Mountain Lion on my old hard drive, but the original OS was Snow Leopard. I haven't succeeded in getting any of my information off my old HDD. Is there another way to install either Snow Leopard or Lion onto my new hard drive?
Running with 10.5.8 version. This problem that I get, and can't pass beyond it, is that I get black screen with a little white line in the left-upper corner of the screen. I have tryed to let it hang for 20 min, but nothing happens.
What have i done:
1. Boot Camp 32GB space.
2. Disk Util -> inspect the memory, reparing the harddrive, analyzing alle the things I can in Disc Util.
3. Format the partation og make new.Nothing has halped me.. I'm stuck and can't do anyting.
I have a Mac Mini (2.55GHz intel duo core) and I trying to install windows xp with sp2 (downloaded from MSDN, burned to boot able disk). I created a 100GB partition with boot camp assistant, and started the installation. When I reboot the Mac Mini, and I select the windows CD icon, the screen goes black, and the Mac Mini just stops reading the disk, and stalls at the blank screen.
my Boot Camp install of XP—I successfully partitioned the disk in my new Mac Pro to install XP, but my problem occurs when re-booting to install XP itself. When the machine rebooted the first time to install, it stopped at a black screen with a blinking white cursor, old-school DOS style. Second time when I rebooted and held down Option, it spit out the Windows CD. When I put it back in and it appeared and I tried to select it, it spun up, looked like it was going to work, and then spit it out again, whereupon I got a DOS prompt asking me to put in a bootable volume and press any key. When I inserted the CD, it spun up, but pressing keys on the keyboard did nothing. I tried rebooting again. This time holding option yielded both the Mac HD and the Windows CD (no spitting out!). Taking this as a good sign, I selected the CD and waited. Same black screen with blinking white cursor as last time, no other response, no prompts, never progesses to an installer, pressing keys didn't help.
Has anyone else run into this problem? This is a brand new Mac Pro with the Radeon in it, I have a USB keyboard and mouse hooked up, and it has the latest firmware update.
EDIT: Seems the CD was bad. Slipstreamed SP2 into my original CD and went. Now I just need to get those ATI drivers.
My brother got an iMac and yesterday he tried to install windows xp with boot camp. But unfortunately he made a mistake and the iMac shut down. Now the mac is stuck with a windows xp in it, and when he tries to start up the computer, it says "the start-up sound" and just stays with white screen. It sounds like the mac reads from the xp cd when it starts, but I can't get the cd out.I have looked everywhere and tried everything:
Hold down the primary mousebutton while it's starting, Hold down "fn" and the "eject" button while it's starting, and hold down "alt" while it's starting
I can't find any "pin-hole" to a paperclip or something.
New to Mac computers. When trying to open computer after being in sleep mode, I clicked the mouse to open the password screen, & a blank blue/black screen appeared & the mouse timer( colored circle) appeared, as if to be waiting. I had to unplug the computer to reboot it. This has happened twice in 2 days.
Just bought a new (2012) mac mini and the hard drive is blank. I don't own any other mac's so I'm lost about how to install an OS. What do I need to do and No, it didn't come with any discs.
iMac 27" i7 with OS X v 10.6.x when I create the bootcamp partition for windows 7 and I install from my original DVD of Windows 7. I format the partition during the install of windows 7 and on the first reboot after windows 7 first part of the install, the screen shows the Windows 7 logo and says continuing installation and then a black screen and then nothing.
I have to hard power off the iMac and then it starts over says the thing about the system didn't shut down properly and gives me the option to start safe mode etc. and does the same thing each time.
I am new to the site, and a new macbook owner as well. My macbook only has a 120gb hard drive and I have already upgraded the ram to 4gb so before I start using it daily I want to get a bigger hard drive in it and the new Leopard OSX because I currently have the Tiger.
When I get my 320GB Scorpio Black SATA 7200rpm hard drive and I install it (which seems very easy to do, almost like the same as taking out and replacing the ram), what steps do I need to do when I boot up the laptop with the blank hard drive? Do I need to put the CD in before I boot it up? Will it prompt me to do anything as it boots up?
I've got a problem with my harddrive, it's on its way out. The Mac will still start, but after a while, the HDD gets stuck and so it's time to replace. I have a full backup on my time machine external hard drive - my question is, how do I get this on the new blank hard drive?
I'm using 10.5.8, but I don't have an installation disk. THe HDD was replaced once before under warranty, and the people in the shop were kind enough to stick on the new system, upgrading me from 10.4, so no disk available. I MIGHT have an installation disk for 10.4, but as far as I understand, I would not be able to restore my system because my backup is on 10.5.
Also, I'm pondering installing an SSD which would be 125GB (financial reasons prevent me from buying a bigger one).
My current HD is 160GB, i.e. the backup will be bigger than the capacity of the SSD. I presume if I somehow get to install Leopard (or Lion) on it, I can restore selected folders, thereby circumventing the problem?
Info: MacBook, Mac OS X (10.5.8), 2GHz Intel Core 2 Duo, 1GB, 667 mhz, ddr2sdram
I recently picked up an iMac G3 with a 600 MHz G3 Processor and a slot-loading CD-RW drive. It had 10.2.8 and 9.2.2 installed. I went into the startup disk menu in system preferences and tried to restart in 9.2.2 and be adventerous. But it would just flash a floppy disk with a ? mark. No matter what I did I could not get back to Mac OS X. I also have a MacBook with Tiger restore CDs. I tried to install that on there but could not and decided to see if it would work if I erased the drive. It did not. So now I have an iMac G3 with a blank hard drive and a Cd drive and a mind that is completely clueless about what to do!
I tryed to install windows xp on my mac and my disk was too scratched so the install failed. So i held down the power button on my mac until it turned off. Big mistake. Now whenever it boot up, it says press any button to boot from cd. I tryed installing rEFit, it installs but doesn'ty boot into the boot loader.
I am going to install a new SSD drive on my MBP mid-2009. After it is installed, can I then start up computer and then insert the DVD Install operating system disk, or do I install the DVD install disk, then shut down computer and swap the HD drive? I know that I will reformat the disk when Installer begins, but I want to know if the computer will recognize the install disk with a new blank HD in place.
I recently purchased an SSD and plan to do the upgrade to my Macbook Pro early 2011.
What I'm planning to do is the following:Remove old HDDInstall SSD out of the box (un-formatted with no data on it)Boot up Macbook and start OSX Internet recoveryInstall OSX Mavericks
My question is, doing Internet recovery will apple Store let me install Mavericks right away or will I have to install
the original OS that the system originally shipped with (Mountain Lion) first and then install Mavericks?
Info: MacBook Pro (13-inch Early 2011), OS X Mavericks (10.9.4)
"In addition, it is possible to completely erase a hard drive and install Snow Leopard without a pre-existing operating system in place, enabling users to bypass the possible headaches of an upgrade and go with a clean install instead."
I'm a newbie here but wonder if the above AppleInsider statement is true. I installed Snow Leopard over my existing Leopard w/out a hitch. Earlier OS X retail DVD versions clearly distinguished between "Install" and "Upgrade" - correct?. I'm confused where I read Snow Leopard required an existing OS (Leopard or Tiger) to install. It appears Snow Leopard is a "full install" DVD?
Every time I try to install a software program onto my computer (Mac OS X 10.6.8), a blank permission screen pops us, with NO TEXT appearing. When I try to type in the information i think it's asking me, nothing shows up, as if my keyboard has been disabled. BTW, I've been trying to install Photoshop Elements and Adobe Creative Suite 3 Design Premium, which I know are compatible.
When finished, I normally put my mac into standby mode instead of turning the power off. Last night, I did the same. When I tried to power on today it seems like my mac is working (the buttons beep when pressed and hear the hardrive), however, the screen is blank (never turned on). I believe if I can actually turn my mac off and on again it may fix it, however, I have already tried taking the battery out and putting back in to no avail and I think everytime I try by pressing the power button it goes into standby mode. Is there a way i can force my mac to turn off instead of going into stanby mode by pressing certain buttons since I can't see the screen?
Got this mac friday but haven't really played with it before yesterday. My problem is:
1) Yesterday I went for logging in to facebook, but suddenly the screen went green? Had to close the mac down and start it again. 2) After I had turned it on and was on the desktop the screen (with me doing nothing) went white, and I had to do the same again. 3) This morning when I wanted to turn the mac on, it wouldn't! But few hours later I tried again and there I could turn it on by pressing esc + start button.
Should I call for a replacement? (Already had two - 1 with dead pixel and 1 with creaking).
I was using it in my bedroom, it was plugged in. I went to make some food, and upon my return I am greeted by a blank screen, probably just a hiccup right? So I held the power button down expecting it to spring back in to life. But it didn't. It wouldn't turn back on. At all. Luckily, I thought, I have my old 2006 Macbook that I keep as a back up just for times like this. As it hasn't been turned on for a while, the low battery warning comes on, so I plug it in. 10 seconds later, it hibernates. I switch it back on, but it keeps hibernating for no good reason. So I think restarting it will solve the problem. It didn't. It too, now wouldn't turn back on. At all.
In the space of a few minutes, they both completely died. I've tried resetting SMC, PRAM, everything I've found on Apple's support page and forums like this. Nothing has worked. The light on the power cable glows orange when plugged in, so it is still charging, and the battery indicator lights on the side of the MBP work fine. Aside from that, they are both completely lifeless...........
I've got a 15in aluminium powerbook, a couple of years old. So far I've had nearly everything go wrong with it. replaced screen, knackered hd, ram port failiure, and a battery that lasts 10 minutes.
I recently replaced the harddrive, as the standard issue one packed up a few times. I followed the instructions on ifixit.com website. To my delight I actually managed to do it, and the pb worked well for a few weeks. Then suddenly, the screen froze and faded to white. So far I've tried everything -
Resetting the pmu. Resetting the pram and nvram. Opened it up to check I reconnected everything. and checked to see if the hd is still working starting it up from another computer, and it works fine. Everythings still there. Someone also said if you hold 'R' key down on start up it resets the lcd. BUT STILL BLANK!!!!!!!!!
The screen still seems to turn black after a little while, indicating the energy saver is still on. I'm thinking I may have dislodged an lcd connection or something?
