I have noticed lately that as I am typing, the words will highlight and erase randomly. It makes it very hard and annoying to type when none of the words will stay. Do you know what the problem could be? This has never happened before to me.
View 2 RepliesI'm in the middle of revision for exams and I'd like to be able to highlight certain portions of text in pages documents. Bold won't do, nor underline (they already have purposes). Can I highlight in Pages (say set a yellow text backgrond as I don't want to do print runs on my notes until I have to (and have reduced them down as much as possible).
So I am running Firefox version 3.0.8 and when I go to highlight anything with my mouse (Like moving from left to right while holding down the button on my trackpad which should highlight the text) it highlights, but the whole window for Mozilla Firefox moves too, even if I have the text box in use, it does happen with other programs.
View 2 Replies View RelatedIn safari for macbook pro, I can't seem to highlight text while scrolling down through to the end of a page. (Start at the top, click, hold, drag down). The highlighting stops at the bottom of what I see on the screen and can't go past to the bottom of the page. However, it works going upwards (start at the bottom, click, hold, drag up. I don't think it's a problem with the computer because, the highlighting works with all my other programs. It's just safari that's not doing it. I'm aware of the hold shift and click method, but I'm just used to the other way.
Info:
MacBook Pro (15-inch Early 2011)
Lets say I'm writing a search into text field on google. I then want add some previously written text from elsewhere. So I find the text and highligh it and copy. Then I return to google, right click to paste and then the previous text in the google text field is highlighted.h
Here's what I mean : [URL]....
Info:
Mac mini, OS X Mountain Lion (10.8.4)
For a while I can highlight text and mark, etc but after I save the PDF it sometimes no longer allows me to highlight any text, even text I have already highlighted..
View 1 Replies View RelatedI'm running into a odd issue in "preview." I'm currently looking at a long PDF document and I frequently use the "search" function to pinpoint specific sections of the doc. However, I noticed that the "search" function does not highlight (or find) any section that's highlighted in grey within the document. Does anyone know what I'm referring to and has anyone else run into this issue? I cannot find a setting for this. If anyone has any idea how to remedy this issue, please post the solution.
View 2 Replies View RelatedThe other thing is this light brown highlighting that jumps all over the place. Along with the twitcy mouse, it too appears suddenly, browning sometimes a whole page.Â
Info:
MacBook Pro, OS X Mavericks (10.9.3)
How do I send email addresses in an email? I wanted to send my family some addresses so they could email more family in an evite invitation. I'm not using my mighty mouse anymore. I use a Targus one as I have arthritis and it's scrolls much easier. I don't think that makes a difference does it? I thought it was a right click and it would highlight the address, and the person who receives it can just click on it.
I use Hotmail and Roadrunner email. I have accounts in Gmail and Yahoo as well, but rarely use them, unless one of my main ones aren't working. What do I do, or what do I have to have in order to click and high light the address? I tried sending links as well and can't get them sent so others can click on them and open it as well. I've used the insert link box and it hasn't worked. I could do this on my pc I have sitting over there collecting dust but not on my IMac.
As much as I love the tight integration of Spotlight, I miss one feature: I want to immediately have a look at the document that is found and be able to locate the search terms within (going from one place to the next). I am using Copernic Desktop Search on my PC and it immediately provides a preview of the search term in the document. Is there a similar free program for the Mac? I found Foxtrot, but it is 29$ just for the Personal Edition [URL:..]
View 8 Replies View RelatedMy perfectly wonderful Mini has started doing the following, in this order:
First, I could no longer double click on a word but the right button functions still worked (and yes, I did try another mouse and had the same problem, then I switched the mouse preference to double click with the right button, but had the same problem). This started two evenings ago.
Second, the next morning, I suddenly couldn't drag the cursor across a word, or a sentence, etc. Now it was really getting annoying, because in my work I paste and copy a lot, and this caused me much, much extra work, so it's not a minor gripe.
Then, by that afternoon, I had a complete system crash. The whole screen froze. I tried turning off my Mini with the power button (which I hated because I know you're not supposed to), but the screen remained frozen.
At that point, done disk repair thing from my original instal DVD. Well, it unfroze the screen, but did not fix the mouse/cursor problem. Clear the PRam. That still didn't work. The next morning (today), it crashed almost immediately. Again, totally frozen. This time, I reinstalled the entire system from the instal disk. No luck.
I came across an app I'd bought the last time I'd had bad Mini problems (and had forgotten), called Disk Warrior, so I tried that. Well, it did find three unfixable, corrupt .plist files that it said could cause system disruption. I thought I'd found the problems. So I deleted all of them AND their apps, downloaded fresh copies of the apps, and restarted. Still same problems.
So, I ran Disk Warrior again, and it reported those same three corrupt plist files. Then I realized it was reporting the ones in the trash, so I emptied the trash, ran Disk Warrior again, and it said NO problems. Restarted and tried to highlight some text, and it worked! But it still wouldn't double click.
Info:
Mac mini (Mid 2010), Mac OS X (10.6.8), Mac lover since the SE
in my calendar, I have a list of 'categories' with different coloring but I am wanting to remove the colors/highlighting but can't find how to do that.
Info:
iMac (21.5-inch Mid 2010)
Mac screen resolution is getting higher and higher, which is nice, but the downside is that we seem to have lost "what you see is what you get." I have set the default document size of Text-Edit to about the size of an 8 1/2 x 11 document, which fits easily on the screen. I have what appears to be a single page of text. It all easily fits in the document window. The headline fits across the width of the page. But when I choose Print, the print preview shows that the text is going to spill out onto two sheets of paper.  I exit out of the print document and reduce the text size so that it all prints out on one sheet of paper. The problem is, the size of the text onscreen is now TINY! It looks like it's about 6 point while the printed text looks like it's about 12 point! No WYSIWYG!  When I revert the document to the way it was originally, where it was going to print out on two sheets of paper, and then hold my printed document up next to the screen, the printed size matches the onscreen size almost perfectly, even though, if printed out at this size, the text would spill out onto two pages and be huge. In other words, 18 point size text prints out at about 12 points and 12 pt text prints out at about 6pts, so there's about a 6pt difference in how text looks onscreen and how it prints out. Again, No WYSIWYG! My older Macs had much lower-resolution screens, but text printed out at about the same apparent size on screen. I know the original Macs had 72dpi screens so that they would closely match the printed size of text, and I like the fact that monitors keep getting better, but is there a way around this problem of printed text not matching the size of onscreen text?
Info:
iMac, Mac OS X (10.7.2)
So I found the lost project in FCPX. It has a music tract, text and video. When I pulled the project down for editing, I am able to separate the music from the video, but the text bubbles do not appear above the video allowing me to change the misspelled words that need editing.I've searched all of my backup drives for the original footage in case I have to re-edit the whole thing, but I'm unable to find the original footage. Every event in my libraries appears as a finished project.
Info:
Final Cut Pro X, OS X Mountain Lion (10.8)
Safari keeps changing the text field on input, do you know how to correct this issue?Â
Here is an example:
Let's say I load www.google.com, it appears in the safari window as usual.
Suppose I begin to type a search in the google search field at the top right of the safari window (not the one on the google page)
if when doing this the sentence is long for the search, at some point randomly, the rest of the text will be entered this time in the google search text field on the google page! (which is the very next text field) So when I hit enter it makes google search half of my request...
Safari changed the text field I was into with no warning. I want to say I do not press tab at any moment. This is annoying really, and this does not appear anywhere else than in Safari. It seems the issue is not systematic, but appears quite often.
I have no universal access setting except "enable access for assistive device" I had to check this box upon installing a software in the past but I can't remember what it was.Â
I have designed a corporate letter head for a friend and it is still in jpeg format after using photoshop. Now I want to import it into a pages document so that I can give it to him in PC format so he can type over the watermark and put his letters onto his letterhead... now I can do that quite easily on my PC but not so on my Mac...
I can add the watermark image into the Pages document but for some reason I can't work out how to modify the text from then... i can see how you move the text formatting but if i wanted to add a word into a paragraph etc i can't select the text. It's as if the watermark layer is the only layer I can select and the text is not longer selectable.... can anybody help me out with this please? I just need to be able to select the text layer and modify the text..
I've been using some cd-rw discs for music and backing up my photos. What are the capabilities of rewriting and erasing stuff that I put on the discs since I can't seem to erase or rewrite anything I've already put on them?
View 5 Replies View RelatedI couldn't find it on OS X. On windows I used to right click the CD/DVD and click erase, but I don't see a similar option on my Mac. Do I need any special application for this?
View 3 Replies View RelatedMy TimeMachine external HD is almost full, so I would like to erase a couple of iMovie projects that I don't need anymore and are pretty big. I did this once my opening a 'find' window and moving the files to the trash from there but this no longer seems to work.
View 1 Replies View Relatedtoday after long saving I bought my first apple product An imAc 24" (awesome stuff )
My mom asked me to put Vista on it because she has trouble with OS X, when I used bootcamp to divide my HDD I took to much space for windows (like 450gb ) Only leaving me, the biggest user of this comp with 100gb on my OS X lol)
Any way to make the Windows partition smaller and add the extra free space to my OS X partition without erasing any thing?
My iMac gives an error when trying to backup, so I'm trying to erase the sparsebundle and start over. Every time I try, i get an error saying "The operation cannot be completed because the item 'bands' is in use."
Any ideas on what "bands" is and how I can erase the TC? Is there a way to restore to factory settings instead of trying to erase the sparsebundles? (plural because I back up both my MB and iMac on it.
putting my Macbook up for sale and was wondering if there's a quick way of returning the Mac to the settings when it was new?
View 2 Replies View RelatedI'm signed in to my same iTunes account on my Macbook as my PC. But to sync with my Macbook it wants to wipe everything. How can i make my iphone syncable with my Macbook now without erasing everything?
View 5 Replies View RelatedWhen zeroing out my HD, do I select the one that says "Toshiba MKxxxxxxx" or the one that says "Macintosh HD"? What is the difference?
View 4 Replies View RelatedMy hard drive currently has 2 partitions, one for time machine and the other for everything else. I would like to repartition so that I can have 3 partitions but without erasing everything. Is this possible?
View 2 Replies View RelatedI follow the instruction to erase the hard disk and format my new imac os lion but i found some problem when i deleting the hard disk.I follow all the intrustion came to the DU part, click erase on top, select the hard disk thn click erase, but it show that erase fail " unmount disk" what does it mean?
Info:
iMac
I appear to be getting more and more available HDD space on my Mac despite not actually deleting anything.Â
Yesterday it looked like approx 30GB was freed up and today about another 25GB.
Info:
MacBookPro, OS X Mavericks (10.9.4)
I have an External 1 TB HDD where 250 GB of it is dedicated to Time Machine back-ups. I only have about 25 GB of space left but Time Machine won't update .. says there's not enough space. I thought that TM auto-deletes the oldest entry? Well it's not working. What should I do? Do I need to do into Disk Utility and just highlight my TM Partition and erase it then start over? There's nothing on it that I need.
View 1 Replies View RelatedIn the effort to use Time Machine, I want to partition my external drive. I have 500 gig external, and would like to have one partition of 480 and one around 20. This way, Time Machine will only back up onto the smaller partition, not endlessly backing up until all 500 gigs are used. The reason I need to partition without erasing is my 170 gig iTunes library. Its too large to transfer to my internal HD, and I have no other drive to store it on.
View 20 Replies View RelatedWho here has experience with this process? What are all the benefits, do I get back more space? I heard that a large file is created somewhere.
View 2 Replies View Related