I have AT&T, and recently ordered high speed internet service from them. I have a Macbook Pro (circa 2006) and a 2Wire 2701HG Gateway. I can connect to the internet with my ethernet cable no problem. When I go into System Preferences->network, Airport recognizes my network, but says "AirPort is connected to the network ___. Airport does not have an IP address and cannot connect to the Internet."
View 1 RepliesI'm staying at a hotel for an extended period and they said if I gave them my wireless mac address and they could allow me to not have to login every time I opened Safari.
View 1 Replies View RelatedFor specific reasons, I needed to connect my Synology DS211 NAS to my iMac directly via its ethernet port. I discovered that if I share my wireless internet connection (coming from my cable modem/wireless router) from wireless to ethernet, then the NAS would get the IP stuff it needed to show up. did that, voila, NAS is acting like a glorified external hard drive. BUT, when I did that, I lost all internet connectivity on my iMac. Still have full wireless signal. preferences pane says I'm fully connected to my network with an IP address, but safari always fails to pull up any webpages, saying I'm not connected to the internet.As soon as turn off the ethernet PORT, it all starts working again. And to make it even crazier, I discovered that if I leave sharing my wireless internet via my ethernet port ON, but turn off the ethernet port (in pref pane), I can STILL access the NAS just like before. That makes no sense - I'm sharing my internet via a port I have turned off, but it works? Anyway, why would Iose my airport wireless internet connection when the ethernet port is on - configured manually?
Info:
eMac 1.25GHz & iMac Intel 2.0GHz Intel, Mac OS X (10.5.8), 80GB external FW, 1GB RAM, Superdrive(DL)
I have downloaded windows onto Bootcamp and i have wireless connected, but still wont load onto wireless for internet via intenet explorer.
Info:
MacBook
this is a major problem for me. I just installed ubuntu on my mac via boot camp, and I can't find how to set up wireless internet! Once, after installing windows, the same problem occurred. I'm not sure whether this version doesn't support airport (ubuntu v10.04.1) or I need the snow leopard drivers (but I can't because it's a .exe file).
View 5 Replies View RelatedI just bought wireless for my room, but it obviously just uses my Mac address and therefore I cannot get wireless on any of my other devices. Is there a way I can get my Xbox to connect to the wireless? Can I make my computer become a router and give it a MAC address for anything connected to it?
View 3 Replies View RelatedWhen I try to connect to a wireless network. It says there is no IP address? I know nothing about computers. The mac shoppe told me I needed to erase everything and re-install my software. I did this, and it still doesn't work. I'm very frustrated because I lost everything when I did this!
When I connect directly to the modem, it works fine.
When both computers Beige G4 (os 9,2,2) and an eMac (os x Tiger) are connected to the internet with wire cables, there's no problem. I can hook up to the eMac from my Beige G4 (os 9.2.2)using Chooser/Appletalk/and inputing the IP address of the eMac (from Network preferences); which lets me connect.
When I'm hooked up to Internet- wireless with Afterthemac n300 usb internet adapter on eMac, my problem is that I need to have an IP Address of the wireless computer (eMac 750mhz) so that I can connect to it with a G4 Beige Mac os 9.2.2) which I can't find. I get the following in the Network preferences: Configure IPv4: Using DHCP (drop menu); IP Address 192.168.2.11; Subnet Mask 225.225.225.0; Router 192.168.2.1 The optional boxes for DNS Servers and Search Domains are empty.
These numbers were suggested by the Internet provider, which I entered in anticipation and before I received the n300. The router which I rent from the service provider is a SIEMENS GIGASET567. So- is there a way that I can change the numbers from above so that I can connect both computers. I tried the IP 192.168.2.11 but eventually a message comes back telling me it can't find the server. Another reason might be if I would want to hook up to the eMac from another office to get information on that particular computer.
Where I work there is a "free, pubic" wireless network. I can access it with my PB G4, and it will show two or three bars of connection. But, I'm informed that my computer is not connected to the internet and when I check the Network control panel I'm it shows that my PB has a self assigned IP address. Meanwhile, someone with a Windows laptop sitting right next to me can connect without issue.
View 6 Replies View RelatedFirst off I'm not very literate in security issues or computer terminology so I'm sure I am going to come off as a complete moron but can anyone tell me what the security risks are if someone has my IP address. Can they access my computer? Can they access my internet based email? Can they find out who I am? If I access a forum through a link from my internet email can the administrator of the forum (or anyone else). Hack my internet email? Hack my computer? Find out who I am? I have a Powerbook G4 and I'm running 10.4.11.
View 2 Replies View RelatedI just found an old mac in my room, I think it is a power mac g4, it is running OS X 10.3. I am trying to get it connected to the internet using a cable straight from it to my router (netcomm), the same way i do with my other mac. However, no matter how many different variations i use of my various settings, it wont connect. I have come down to needing a subnet mask, IP address, and router address.
I am almost certain i have the subnet mask and router addie correct, but there seems to be no way for me to find the g4's IP. I have been in system preferences, but all the 'IP' bits are just blank and unclickable. I don't know if it makes a difference, but the G4 was connected to the internet in the past before we upgraded, so it should have an IP somewhere, right?
I have just bought a macbook, my internet connection at home is wireless however it requires the IP address of each computer using the wireless network to be entered into my wireless account, just an extra security measure. My new macbook has never been connected to the internet as I can not find the IP address I have tried applications/utlities/network utility and there is just a blank space where it says IP address. I have also tried System prefences/network and there is no IP address there either.
View 3 Replies View RelatedI have a Linksys WRT54G wireless router (v. 6), a brand new iMac (Intel, OS 10.5.4), and an older iBook (G3, OS 10.3.9). I can configure the router using the iBook with no problems. Afterwards, the iBook shows an IP Address, Subnet Mask, and Router under the iBook's Network Preferences. The iMac detects the wifi network I set up using the iBook (for example, "mywifi") but cannot obtain an IP address or other configurations. Sometimes the iMac says Airport has a self-assigned IP address but can't get on the Internet, sometimes it says it has no IP address. I have removed all WPA securities/encryptions to simplify the process, but the iMac still can't see the router. I tried to ping the router from the iMac and no packages were received, 100% loss.
View 1 Replies View RelatedI have a problem with my macbookpro and connection to internet.
1 week ago my computer as stopped to connect to internet.
I was used connecting with my airport express, but at one point my macbook pro stopped receiving ip adress from interenet.
the message on the network connection is Airport is connected to the network. Airport is does not have an IP address and Cannot connect to the internet
I have try everything...:
the Airport is working becouse all the others computers inside on my office are working well with airport.
If I connect my computer with a cable I have the same problem.
I have reset and restart Airport and computer.
I have let my connection and computer disconnected and switched off for 24 our.
I have verifyining that is not an hardware problem because I have installed a fresh OS on an external drive and when I boot from the external drive everything working well.
The OS is on boot installation 10.4.9
the machine is a Mac book pro 17 2.16 GHZ intel core duo with 2gb 667 Mhz.
My problem is that on the old installation I have a lot of software installed and will be take a lot of time doing all the new installation. I wondering if there is a way to recover the situation.
I usually have no problems hooking my Xbox up to XBL wirelessly to the interent, but I recently moved and now it wont connect to XBL. It shows the SSID but when put the passphrase in it begins to connect and then it says there is a problem. it says it is "connected" but there is no IP. All the setting as are put to Automatic.
I have tried shutting the router off and my Xbox and I even tried connecting an ethernet cable to my MBP and Xbox. I got an IP when I did this but it still didnt connect. so that's one problem. Another problem is that I dont know how to share my MBP with my Xbox...Like I said, I have the wireless adapter thing but maybe I have been going about all of this wrong.
has an "!" over wireless display. When I go to network settings it says... "AirPort has the self-assigned IP address 169.254.20.213 and will not be able to connect to the Internet."it is happening on both my new macbookpros one is a 17' one is a 13"
View 1 Replies View Relatedairport connected but has no IP address and no iternet connection
Info:
MacBook
Pro, Mac OS X (10.7.3)
my family just switched from Verizon Fios to Comcast and we don't know how to set up our wireless routers. A long time ago we had DSL so the routers we have are Linksys wirless-G WRT54G both of these routers are already password protected. The bigger issue when is when I plug the ethernet cable from my modem to the router and click the router's name in Airport it says failed to open page any ideas
View 12 Replies View RelatedFor some time now, I have noticed that my Mac's internet is running super slow. I am saying slower than what I see on my PeeCee (Used for gaming such as CSS and Half-Life)! So, I set out on a Google journey to find that a lot of people have been having the same problem with they Airport. It seems that in some Apple updates, the Airports are having issues. So, I tried to fix it and I came up with this wonderful guide. My internet now loads Facebook in 3 sec instead of the 30 sec it was before and I can watch my good old YouTube videos in a flash.
First, Open your "System Preferences";
Next, go to your "Network" settings;
From there, make sure Airport is highlighted and click "Configure";
Click the "TCP/IP" tab;
Type 4.2.2.1 into the blank DNS Servers box, hit return and type 4.2.2.2 then click the "Apply Now" button like so;
Your internet may restart, but it will come back on right after you hit Apply! And your internet should now return to speeds like it used to have. I am running 10.4.10 and I am proud to say my Internet is fast as hell.
So I got a PowerBook G4(1.5 GHz, 512 MB RAM, a superdrive, and an airport card) for Christmas. Before I opened it as a present, my cousin did a clean install of Leopard. My wireless internet goes out every time I try to go to a new page or even refresh it. It's extremely annoying. In order to get it back on, I have to turn my airport card off, and then on again. I was thinking it was my airport card, but then the other day, I went out of town to a friends house.
My internet didnt go out once. I just got back today, and it keeps going out. My home internet is locked with a password, but my friends internet wasn't. However, I previously had a PC laptop and the internet was fine, my cousin has a MacBook Pro, and my brother just got a MacBook. All of them connect to the internet wirelessly and they don't have any problem with their internet. I don't know what to do.
So...I just got my new MacBook Pro yesterday for graduation and I've been trying to connect to the internet wirelessly.
We have a Belkin 54G Wireless Router, which was private but I reset it so I don't think the wireless network is private anymore. So...my Mac now connects fully to the "Belkin54g" wireless network but I can't seem to get on the internet. We also connect through a Motorola modem.
I don't really know the difference between the DCHP and PPOEthingy....and network diagnostics apparently can't help.
I've tried putting in the IP address/subnet mask/etc but that doesn't work either. Sometimes it says its connected, other times it tells me there's no IP address.
If I need to call anyone, who should I call? The Mac people or the Wireless router/internet people?
I have wireless on my macbook but thats cuz it has a wireless connection/Airport.But my emac doesnt Is there anyway I can get wireless connection on it?
View 9 Replies View RelatedI am a new mac user and have bought a ibook g3 10.1.5 from a friend...i figured i would start with this. I have never used one before.
Wireless internet??? what do i need, where do i start?
Will it run all of my non mac programs? bible software, webcam, skype??
How do i change the name of the computer to my name????
I'm brand new to Mac. I just got a MacBook Pro, and I've been having some troubles connecting to the internet at home. I have a LinkSys WRT54GS router with Firmware Version: v1.50.9. I'm unable to access the internet through both ethernet and wireless. Concerning wireless, I have tried connecting using WEP, and have tried entering passcodes both with and without an "$" and "0x" preceding the 10 digit WEP passcode. I have also tried switching the encryption over to WPA2, and still nothing. I have even disabled the security to see if it's able to connect -- it's not. I had some error regarding not being able to find it's IP or something along those lines.
View 4 Replies View RelatedI need some info if this is possible, is there any means software wise other then changing the WEP password on my wireless modem to block someone from using it? This person of interest is using a windows laptop with xp and has some kinda of WEP crack program that can find out the password. So hence changing the password is a lose, and I'm not to sure if there are similar programs to WAP based (if not I go and buy an apple airbase with WAP2 password). I was thinking of some means of knowing the I.P. number of the laptop and preventing the modem from having it connect to it.
View 24 Replies View RelatedI get internet from my neighbor next door, and where exactly about 18 ft. apart. I know that having a repeater or an external antenna can solve the problem but i cant afford those things right now. I know that on pc you can go to task manager and conentrate your bandwidth percentage to internet explorer, but is there anything like that i can do to my mac? also any other free way would be good too.
View 5 Replies View RelatedMy parents are taking a much needed vacation. I suggested to my mom she take the laptop i bought them a few years ago (a rarely used 17" PowerBook). And of course they will need a mobile internet card. But its not like they are jet-setters or use that laptop outside of the house very often, if ever. Their mobile phone carrier is Sprint. But it looks like all their internet card options are for a 2 year contract. I'm looking for something for either a very short or no contract. I even checked through AT&T, which is what i have, but everything seems like a 2 year contract. They get a vacation once every two years . Ideally, i was hoping for a one month data cost and either "renting" (??) an internet card, or buying one if they had to.
View 1 Replies View RelatedThis is my first ever mac that I've owned given to my by a friend, so excuse my simplicity. It's a G4 and I have a wireless internet access at home through Time Warner Cable. It doesn't seem to have an airport card. What is the easiest way to connect to wireless? What additional cards would I need to buy?
View 2 Replies View RelatedI have a 2 GHz MacBook3,1 with Intel Core 2 Duo.
My router is 2Wire.
My firewall allows all incoming connections.
My wireless card type is AirPort Extreme (0x14E4, 0x88) -- not sure if that matters.
And of course, I use Leopard.
Anyways, my internet connection has been shaky ever since I bought the computer (January). I always assumed it was my NETGEAR router, because everything worked fine when I was at my university. However, I found out that if I used my computer for too long at the university, my internet went out again.
I just moved to a place that uses 2WIRE as a router, and voila, even though it worked fine for the first day/night, everything went downhill after that.
What internet problems am I having? Here are some examples:Browsers claim I'm not connected to the internet:
Images don't load:Pings don't work:
I already used IceClean to clean up my Mac, as well as Safari specifically. I looked at the DNS servers page for a while (because a few message boards said that clearing up the DNS servers would help things, but only one is listed). I restarted the router. I restarted AirPort.
I recently got wireless internet. Before, the Mini worked fine connected by cable. It has never been connected to a wireless before. The wireless router works correctly, my $250 PC connected to it instantly. There is a yellow light on Airport and it automatically populates an IP address, whatever that means. I haven't installed any new software since it worked with a cable, no funky setup or third party anything- it's just a mac mini plugged into a TV I watch Netflix on and that's all.
My ISP said it's a problem with the computer, the Mac free support could not fix it. I really don't want to pay for an extended warranty or phone support on something basic that this computer should just automatically do. I haven't tried typing in a manual IP address- I don't know what that address would be. If all else fails, I will just run a cable to it again.
