I have a lacie firewire external hardrive. It's not showing on my mac when I plug in the firewire cable. When I put the usb cable in it shows right up. Now, when i connect the firewire cable to a friend's mac it shows right up.
View 1 RepliesI have successfully connected a couple of times to a firewire external hard drive connected to my dad's iMac over the internet (AFP server) for the purpose of backing up some files, but now it doesn't show up at all as a volume when I connect to his iMac through finder/go/connect to server. I don't believe that any settings were changed, so don't understand why it isn't showing up. Currently when I get info on the drive 'shared folder' is checked, everyone has permission to read and write and 'ignore ownership on this volume' is checked and file sharing is enabled in system preferences/sharing.
View 2 Replies View RelatedI have a Western Digital External HD and am using an emac computer. I left my hd plugged into another mac for a week while I was on vacation, it was working fine. When I got back it was not showing up on the computer, and would not show up after I unplugged it, restarted, etc. I thought maybe it was the computer, but it will not show up on mine either. I cannot be sure the hd was not dropped, but I was told that it was not dropped. Anyway, it turns on when plugged in and makes noises like it's working, and the lights are on. It just does not show up on my computer. My friend said this is probably a case problem, but I don't know what to do in general about it.
View 10 Replies View RelatedWent and did the bootcamp thing and installed Windows 7. I tried to connect my HD external via firewire, but it would not show up in Windows. This is after I did a backup of my mac to time machine. Will it work after time machine backup?
View 1 Replies View RelatedI'm not sure if this qualifies as a hardware issue or a software one. I recently swapped out from a PC to a iMac. I wanted to keep all my old files so I pulled out the internal HDD and placed it in a HDD Enclosure and connected it via USB 2.0. Now the Mac recognized it and all seemed well, but a hidden folder I need access to doesn't show up on my drive. If it helps, this drive was the master drive on my old PC and the file I'm trying to locate was on the desktop.
View 24 Replies View RelatedI recently purchased a 500gb LaCie hard drive to use as as extra storage for media, not necessarily for back up purposes. I cannot seem to find it either under disc utilities or in the finder window. Has anyone had this issue with a hard drive and if so any suggestions?
View 12 Replies View RelatedI have a Macbook (blackbook) running OS X 10.5.3 and a 160GB Firelite HD that connects via USB. It use to show up and run just find but lately it hasn't been showing up on the desktop or in Finder. However, it shows up in Disk Utility, which shows that nothing is wrong with it. How do I get it to show back up on the desktop/finder?
View 2 Replies View RelatedWoke up my laptop from sleep with the 400 port connected to a video deck and the 800 port connected to a raid and a simple external. Power was 'off' on the video deck, power was on for the raid and the simple external HD. Running snow leopard, my externals weren't showing up, no matter what I tried, including power cycles, reboots, unplug/plug, etc. Then for some reason I removed the cable in my 400 (connected to the unpowered deck) and with all else being an original configuration, both my of externals showed up in the finder.
View 1 Replies View RelatedCan I boot to an .iso on a firewire drive? I've been having trouble with my disc drive lately, so this is how I'm trying to work around it
View 1 Replies View Relatedim looking for an external enclosure that provides a firewire option for my macbook pro. The reason i am doing this is because my macbook will randomly eject my usb powered one for no reason. I have been reading that firewire does not have this problem. Im only looking for an enclosure as I replaced my stock 320gb hardrive with a 64gb ssd for my main drive. Preferably something in the 30$ range because im a poor college student . Anybody know of a good enclosure to go with?
View 5 Replies View RelatedI recently bought a VANTEC NexStar 3 NST-360FBSU-BK. In the exclosure, I have a SATA drive capable of 3.0Gb/second. It's attached to my Late 2009 Mac Mini via FireWire 800. Based upon my understanding and in this situation, the FireWire should be the bottleneck. Therefore, I should be enjoying bandwidth somewhere shy of 800Mb/second. nfortunately, I'm not getting any where near that speed. I can transfer a 726MB file in 18.6 seconds. According to my math, that's ~5808Mb/18.6 seconds = ~312 Mb/second. This is not even FireWire 400 or USB 2.0 speed.For completeness sake, I also just upgraded from 2GB of ram to 4GB (both PC8500) but nothing seems negatively affected (in fact the computer is much, much more snappy!).
View 7 Replies View RelatedI have a few macs running Tiger and Leopard and do not have a hard drive that is filled to more than 20GB of the capacity. Looking for external hard drive solutions. I have found a couple of very good drives that only have FW 400 and USB 2.0, one in particular is a older model G-Drive 500GB for $50 that is supposed to be quite reliable. These drives are being blown out due to newer ones have esata and fw 800. Would I see a difference in speed cloning or backing up to a a fw 400 drive even if I get a newer mac that only has fw 800 ports and I use a 400-800 adaptor? The better drives are faster 7200 RM vs the slower 5400 drives, mostly portable that I have been looking at. I have been reading posts that for applications such as mine I would not see a difference. For the most part I use the computers for office related tasks including Word, Excel etc with not much else, although I have some different utility programs. I just want a bootable drive should my hard drive fail. I use Carbon Copy Cloner to clone my drives. My main comp has two drives where the primary is cloned to a secondary, but want a external that I can easily plug into a new mac and clone the hard drive in that Mac to my external drive!
View 2 Replies View RelatedAfter one of the security updates to OSX 10.3 my OWC Neptune firewire external harddrive quit showing up on the desktop and I can't find a way to access it.
View 1 Replies View RelatedI am having a heck of a time trying to get either a brand new Lacie d2 Quadra OR a G-Tech G-Drive (both 2TB desktop models) to work on my iMac via the Firewire port. Mac is running 10.7.3, 2.8ghz Intel Core Duo.
Both drives are brand new out of the box.
When I connected them using Firewire they look like they mount, but they are unusable. They won't unmount if I try to reformat. Get error messages if I try to reformat, verify or disk repair. Messages say something about not being able to read some information. Keep in mind there's nothing on the drives. I have tried getting them to work with Time Machine with no luck. A few times it would backup for several hours only to give an error message and crash. Something is clearly wrong when I use Firewire.
But when I connect using USB? Voila! No problems at all. Repair, formatting, storage, etc. all work fine.
What the heck is it with Firewire? I am dealing with slow transfer speeds for now, but I'd really like to have them connected via Firewire and off my USB ports.
I have zapped the PRAM and permission module to no avail. Not sure what else can be done.
Have late 2006 iMac 24'' and I can't boot from external FireWire drive. If I connect the same external drive via usb2 I can boot from it but it is slower than FireWire800 would be. The external drive is in i-tec 3.5 External Case.
Info:
iMac, Mac OS X (10.7.3), iMac 24'' late 2006 intel DualCore2
My external firewired hard drive is 250 GB. There is at this time approximately 189 GB remaining unused free space. How can i create a special partition of approximately 20 GB ? Can Disk Utility do that or do i require a commercial version ? And if Disk Utility can do that how is that done ?
View 9 Replies View RelatedI recently purchased an external hard drive (firewire 400) and I want to move my home folder there. When I hold down the option key and click on the folder, it just copies my home folder to the hard drive. Is it possible to move my home folder to the hard drive? I'm using OSX 10.3.9.
View 7 Replies View RelatedI am in need of an external hard drive for backups of my new 24" iMac due to arrive on Wednesday March 25. I am moving from the PC works (old Dell) and will need something larger than the old one I have for the long term. I have an old external hard drive case and a 250GB ATA hard drive inside I can use for the time being with the new Mac if I reformat it.
That said, I would like to get a drive that is at least equal to what is in the iMac with is 1 TB. I have read a lot of postings and believe I will get a Western Digital MyBook for Time Machine backups (unless someone has a better alternative). Is there any reason to get the Studio 1 or II (FW 800) over the Essential (USB 2.0) for my purposes - backups only? The price difference is $40-80 for equivalent drive space with connections being the difference.
If I connect my Western Digital 500 GB external hard drive up to a computer using the USB port, then can I daisy chain a firewire camcorder to the hard drive and use it with the computer? Or is that impossible?
I hate the fact that the Macbooks don't have firewire, other then the white one. or the Pros.
I just got a new hard drive for my Black macbook 2,1 and no i need a good external hard drive to put my old hard drive. Do you guys have any recommendations, I'd like to get something that has firewire and usb.
View 3 Replies View RelatedI recently bought both a new MacBook Pro running Snow Leopard (10.6.2) and a 500 gb Western Digital firewire drive to back up my files. I copied a large amount of files to the external drive, but when I try to move those files into a different folder on the same drive to organize them, it tries to copy the files instead of just moving them. I can't figure out how to just move them into a new folder for consolidation without creating a duplicate file. Am I missing something basic here?
View 4 Replies View Relatedim trying to install Mac OS X 10.5 on to an external drive. I want to run Leopard off of an External Hard Drive which will connect via Firewire of USB 2.0. I have booted up using the install DVD that i bought a couple years ago to upgrade from Tiger. However each time i install i get an error saying that it cannot be installed. It allows me to start the install and is almost complete before i get this error. I have it partitioned using the Apple Partition Map so i can boot up on a PowerPC computer.
What should i do to install 10.5 on an external drive?
I have the 2007 intel mini and I am looking for hard drive options. Was thinking of installing a 320 gig 7200 drive in it but they are about the same price point as an external 1 TB 7200 3.5 drive. Is it possible to just run the mini off the external drive via firewire or USB2? Would that be slower than using the internal drive?
View 7 Replies View RelatedI have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?
View 1 Replies View RelatedMacBook Pro - Time Machine won't backup to firewire external drive?
Info:
MacBook Pro
I have a 2010 macbook pro with snowleopard on it & have a 7 port ac powered usb hub hooked up to it. If I plug in 1 or more external hard drives into the hub & have them working together/transferring files, will there be a big slowdown?right now my hard drives are in just usb 2.0 enclosures. Would it be worth upgrading their enclosures to firew wire - esata? would I feel a performance difference?
View 4 Replies View RelatedI am looking for a eSata expresscard for my MacBook Pro. I have a problem with looping my G Drive external through my firewire soundcard due to the single bus on the mbp. It just doesn't like it. What eSata expresscard adaptor would you recommend so i can hook my G Drive upto it?
View 4 Replies View RelatedI'm looking for a way to connect an external bus-powered Firewire 800 hard drive (Glyph Portagig 800) to an iMac which only has Firewire 400 ports, and still powering the drive through just the Firewire connector.
All I've found are Firewire 400 to 800 adapters, allowing Firewire 400 peripherals to be connected to computers having only Firewire 800 ports. I need the opposite of course.
Where can I get such adapters, and without sacrificing bus-power?
So here is my bright idea. I still may want to have Windows on my iMac for work projects *sigh* I think I came up with a solution, I rather not partition my iMac (when I buy it) 1TB drive for Windows. Don't want Windows on my main disk - I need the storage for Mac things, personal stuff etc. Is it possible to boot from a Firewire connected external HDD to run Windows?
View 4 Replies View RelatedI am Running a 2.8Ghz Intel Core 2 Duo 24" iMac running Mac OS X 10.7.3. I run time machine to backup to an external Seagate 3TB, FreeAgent GoFlex Desk, FireWire Drive. When the Mac goes into sleep mode, the Seagate drive un-mounts. When the Mac wakes up, I get an error that the drive was not properly disconnected and the drive is no longer mounted. The only way I can get the drive to remount, is to remove power from the drive for several seconds and then reconnect it.
View 1 Replies View Related