My external firewired hard drive is 250 GB. There is at this time approximately 189 GB remaining unused free space. How can i create a special partition of approximately 20 GB ? Can Disk Utility do that or do i require a commercial version ? And if Disk Utility can do that how is that done ?
View 9 RepliesI need to partition an external hard drive because time machine requires its own partition. How would i go about this without deleting the entire drive and doing it that way?
View 3 Replies View RelatedI have a 250GB Lacie HD. I want to repartition it from five 42GB drives to two. (I can delete everything in present HDs, as have copied over to new mac) Despite a Google cannot find info.
View 1 Replies View RelatedI used Boot Camp to make a Windows partition. Since then, I have run out of space on my OSX partition. How can I resize the thing without having to reinstall Windows or lose any of its data?
View 6 Replies View RelatedCan I boot to an .iso on a firewire drive? I've been having trouble with my disc drive lately, so this is how I'm trying to work around it
View 1 Replies View RelatedI'm having problems installing OS 10.6 on my iMac. I had to replace my hard drive with a new 1TB drive and in trying to install the OS I get a message saying I need to use Disk Utility to repartition the hard drive using GUID Partition Table but I don't see any such option in the Disk Utility menu!
View 2 Replies View RelatedI was repartitioning my hard drive in Boot Camp prior to installing windows xp, but changed my mind after I had chosen to partition in fat32 and did not complete the process. Now my hard drive sees itself as partitioned and I cannot use Boot Camp to install Windows XP. When I try using Boot Camp again, I get the message :
"the startup disk cannot be partitioned or restored to a single partition. Backup the Disk and use Disk Utility to fromat as Mac Os..... Restore your info to the disc and try using Boot Camp again...."
My question is: is it even possible to reformat the hard drive from fat32 to nfts? I am new to MAC switching from Windows and wanted to install an embroidery software.
I have a 2008 MacBook Pro, and last night, it suddenly restarted. When starting it again, it stayed on the grey screen with the Apple logo. Following a support page provided by Apple, I tried the following:
1. Start the Mac in safe mode
2. Reset the PRAM
To no avail. Then I restarted it, and held Command and R, and it went into disk utility. There, when Repairing my hard drive, Dis Utility told me to back-up the drive and repartition it.
I tried to back the disk up to a flash drive, but I got the error "The Source Could not be validated"
Then I proceeded to repartition the disk anyways, but I am confused on how to. I'm scared that if I erase the disk, Mac OSX will be gone, and I won't be able to use my computer.
I have two questions:
1. How can I backup my disk
2. How can I repartition it?
im looking for an external enclosure that provides a firewire option for my macbook pro. The reason i am doing this is because my macbook will randomly eject my usb powered one for no reason. I have been reading that firewire does not have this problem. Im only looking for an enclosure as I replaced my stock 320gb hardrive with a 64gb ssd for my main drive. Preferably something in the 30$ range because im a poor college student . Anybody know of a good enclosure to go with?
View 5 Replies View RelatedI recently bought a VANTEC NexStar 3 NST-360FBSU-BK. In the exclosure, I have a SATA drive capable of 3.0Gb/second. It's attached to my Late 2009 Mac Mini via FireWire 800. Based upon my understanding and in this situation, the FireWire should be the bottleneck. Therefore, I should be enjoying bandwidth somewhere shy of 800Mb/second. nfortunately, I'm not getting any where near that speed. I can transfer a 726MB file in 18.6 seconds. According to my math, that's ~5808Mb/18.6 seconds = ~312 Mb/second. This is not even FireWire 400 or USB 2.0 speed.For completeness sake, I also just upgraded from 2GB of ram to 4GB (both PC8500) but nothing seems negatively affected (in fact the computer is much, much more snappy!).
View 7 Replies View RelatedI have a few macs running Tiger and Leopard and do not have a hard drive that is filled to more than 20GB of the capacity. Looking for external hard drive solutions. I have found a couple of very good drives that only have FW 400 and USB 2.0, one in particular is a older model G-Drive 500GB for $50 that is supposed to be quite reliable. These drives are being blown out due to newer ones have esata and fw 800. Would I see a difference in speed cloning or backing up to a a fw 400 drive even if I get a newer mac that only has fw 800 ports and I use a 400-800 adaptor? The better drives are faster 7200 RM vs the slower 5400 drives, mostly portable that I have been looking at. I have been reading posts that for applications such as mine I would not see a difference. For the most part I use the computers for office related tasks including Word, Excel etc with not much else, although I have some different utility programs. I just want a bootable drive should my hard drive fail. I use Carbon Copy Cloner to clone my drives. My main comp has two drives where the primary is cloned to a secondary, but want a external that I can easily plug into a new mac and clone the hard drive in that Mac to my external drive!
View 2 Replies View RelatedAfter one of the security updates to OSX 10.3 my OWC Neptune firewire external harddrive quit showing up on the desktop and I can't find a way to access it.
View 1 Replies View RelatedI have a lacie firewire external hardrive. It's not showing on my mac when I plug in the firewire cable. When I put the usb cable in it shows right up. Now, when i connect the firewire cable to a friend's mac it shows right up.
View 1 Replies View RelatedI am having a heck of a time trying to get either a brand new Lacie d2 Quadra OR a G-Tech G-Drive (both 2TB desktop models) to work on my iMac via the Firewire port. Mac is running 10.7.3, 2.8ghz Intel Core Duo.
Both drives are brand new out of the box.
When I connected them using Firewire they look like they mount, but they are unusable. They won't unmount if I try to reformat. Get error messages if I try to reformat, verify or disk repair. Messages say something about not being able to read some information. Keep in mind there's nothing on the drives. I have tried getting them to work with Time Machine with no luck. A few times it would backup for several hours only to give an error message and crash. Something is clearly wrong when I use Firewire.
But when I connect using USB? Voila! No problems at all. Repair, formatting, storage, etc. all work fine.
What the heck is it with Firewire? I am dealing with slow transfer speeds for now, but I'd really like to have them connected via Firewire and off my USB ports.
I have zapped the PRAM and permission module to no avail. Not sure what else can be done.
Have late 2006 iMac 24'' and I can't boot from external FireWire drive. If I connect the same external drive via usb2 I can boot from it but it is slower than FireWire800 would be. The external drive is in i-tec 3.5 External Case.
Info:
iMac, Mac OS X (10.7.3), iMac 24'' late 2006 intel DualCore2
I recently purchased an external hard drive (firewire 400) and I want to move my home folder there. When I hold down the option key and click on the folder, it just copies my home folder to the hard drive. Is it possible to move my home folder to the hard drive? I'm using OSX 10.3.9.
View 7 Replies View RelatedI am in need of an external hard drive for backups of my new 24" iMac due to arrive on Wednesday March 25. I am moving from the PC works (old Dell) and will need something larger than the old one I have for the long term. I have an old external hard drive case and a 250GB ATA hard drive inside I can use for the time being with the new Mac if I reformat it.
That said, I would like to get a drive that is at least equal to what is in the iMac with is 1 TB. I have read a lot of postings and believe I will get a Western Digital MyBook for Time Machine backups (unless someone has a better alternative). Is there any reason to get the Studio 1 or II (FW 800) over the Essential (USB 2.0) for my purposes - backups only? The price difference is $40-80 for equivalent drive space with connections being the difference.
If I connect my Western Digital 500 GB external hard drive up to a computer using the USB port, then can I daisy chain a firewire camcorder to the hard drive and use it with the computer? Or is that impossible?
I hate the fact that the Macbooks don't have firewire, other then the white one. or the Pros.
I just got a new hard drive for my Black macbook 2,1 and no i need a good external hard drive to put my old hard drive. Do you guys have any recommendations, I'd like to get something that has firewire and usb.
View 3 Replies View RelatedI recently bought both a new MacBook Pro running Snow Leopard (10.6.2) and a 500 gb Western Digital firewire drive to back up my files. I copied a large amount of files to the external drive, but when I try to move those files into a different folder on the same drive to organize them, it tries to copy the files instead of just moving them. I can't figure out how to just move them into a new folder for consolidation without creating a duplicate file. Am I missing something basic here?
View 4 Replies View Relatedim trying to install Mac OS X 10.5 on to an external drive. I want to run Leopard off of an External Hard Drive which will connect via Firewire of USB 2.0. I have booted up using the install DVD that i bought a couple years ago to upgrade from Tiger. However each time i install i get an error saying that it cannot be installed. It allows me to start the install and is almost complete before i get this error. I have it partitioned using the Apple Partition Map so i can boot up on a PowerPC computer.
What should i do to install 10.5 on an external drive?
I have the 2007 intel mini and I am looking for hard drive options. Was thinking of installing a 320 gig 7200 drive in it but they are about the same price point as an external 1 TB 7200 3.5 drive. Is it possible to just run the mini off the external drive via firewire or USB2? Would that be slower than using the internal drive?
View 7 Replies View RelatedI have a Firewire 800 external hard drive and need to connect to my new MacBook Air. Where can I get the correct cable?
View 1 Replies View RelatedMacBook Pro - Time Machine won't backup to firewire external drive?
Info:
MacBook Pro
I have a 2010 macbook pro with snowleopard on it & have a 7 port ac powered usb hub hooked up to it. If I plug in 1 or more external hard drives into the hub & have them working together/transferring files, will there be a big slowdown?right now my hard drives are in just usb 2.0 enclosures. Would it be worth upgrading their enclosures to firew wire - esata? would I feel a performance difference?
View 4 Replies View RelatedI am looking for a eSata expresscard for my MacBook Pro. I have a problem with looping my G Drive external through my firewire soundcard due to the single bus on the mbp. It just doesn't like it. What eSata expresscard adaptor would you recommend so i can hook my G Drive upto it?
View 4 Replies View RelatedI'm looking for a way to connect an external bus-powered Firewire 800 hard drive (Glyph Portagig 800) to an iMac which only has Firewire 400 ports, and still powering the drive through just the Firewire connector.
All I've found are Firewire 400 to 800 adapters, allowing Firewire 400 peripherals to be connected to computers having only Firewire 800 ports. I need the opposite of course.
Where can I get such adapters, and without sacrificing bus-power?
So here is my bright idea. I still may want to have Windows on my iMac for work projects *sigh* I think I came up with a solution, I rather not partition my iMac (when I buy it) 1TB drive for Windows. Don't want Windows on my main disk - I need the storage for Mac things, personal stuff etc. Is it possible to boot from a Firewire connected external HDD to run Windows?
View 4 Replies View RelatedI wanted to do a clean install and repartition my iMac running 10.8. It has 2 partitions. I booted from the recovery disk, went to Disk Utility and erased the two partitions. However, when I tried to change to a single partition got the error message "cannot unmount disk."
Info:
iMac, OS X Mavericks (10.9.4)
I am Running a 2.8Ghz Intel Core 2 Duo 24" iMac running Mac OS X 10.7.3. I run time machine to backup to an external Seagate 3TB, FreeAgent GoFlex Desk, FireWire Drive. When the Mac goes into sleep mode, the Seagate drive un-mounts. When the Mac wakes up, I get an error that the drive was not properly disconnected and the drive is no longer mounted. The only way I can get the drive to remount, is to remove power from the drive for several seconds and then reconnect it.
View 1 Replies View Related