I have decided to use my old desktop iMac G5 in my office just for mailing things out (I work from the home and my office is in the basement-easier to leave the iMac down there and leave my MacBook Pro upstairs)...Problem is, I'm using the printer that got with the MacBook down there (ip4300) and, good news is is that it's printing, BUT...the print is really small.
View 6 Replies
I am trying to print mailing labels but they print too small. When I use my PC they are fine. The print settings are the same on both machines?
View 1 Replies View RelatedMy friend gave me his ibook 900mzh that was not displaying because he did not know how to fix it so I took a stab at it. I am not new to fixing computers as it is my profession but I'm new to Apples. Anyway, the first time I turned on the laptop the lcd displayed without any problems, every time after that it turns on randomly. After taking it apart about 3 times for various reasons and mistakes the laptop now displays every time I turn it on, but if I apply any type of pressure to the lower left side if the laptop the screen either goes black or gets small lines running through it. From what I have learned the only possible conclusion that I could come up with is the magnet that tells the ibook if it is open or closed has something wrong with it. It feels almost as if whenever there is any pressure around the hard drive the screen goes black. Any ideas, or tests I could do to fully determine the problem?
View 2 Replies View RelatedI have a MDD quicksilver with a bad power supply. I have done some research and have found that the MDD psu does fail more than most. One of the biggest problem is cost. As most of you know replacements run $125 and up What I would like to know is has any one found out what actually goes wrong in these psu's? With the amount that have failed I would guess it is a few components that are commonly going bad on each unit. If I cant figure out whats wrong with the unit, maybe a replacement? I have seen the standard atx power supply mod for the mdd but I was thinking something along the lines of the same form factor as the factory psu. the guts could fit in the factory psu enclosure with rewired new 24pin plug. Again I am just throwing this out there maybe some one all ready did this.
View 8 Replies View RelatedWe're hunting for a small printer for a crowded office space. There's a not much desk space or shelf space.
Only need something to print. No scanning, faxing or other functions! Hoping we can get Canon that is compatible with the inkjet 40 and 41 cartridges as we already have a printer that uses those.
Requirements:
Text documents
Photo printing
I have the iMac 24 desktop and I print to an Epson RX600. No matter what I try to print and where it is coming from the page always prints out so little. There is a "shrink to page" box on the print preview that I always make sure in not checked. Why does everything print so little?
View 1 Replies View RelatedI have a device that captures music from my old cassette tapes and converts it to MP3 format via my Imac. The problem is that the software is on one of those miniature CDs and I don't want to insert it in the slot on the Imac because there is no way of knowing if it is centered.
View 2 Replies View RelatedThere are a few very small specs assumably under the glass of my iMac. Its white when the screen is of but it changes colors according to what is showing on the screen. What is it? And how can i get it out?
View 8 Replies View RelatedSo if the new iMacs don't come out soon, I'll be getting a refurb. Now my question is about the keyboard. Is it possible to get a bigger keyboard with number pad instead of the smaller ones? I know you can edit it in the cart on a new mac, but you can't on refurb. Any chance that you can take it to the Apple Store and get the small keyboard exchanged with the larger one?
View 6 Replies View RelatedI just recently purchase the larger iMac and and I was told I can make things on the screen larger so that I won't have to strain my eyes. I just can't figure out how to do so. I know how to work it for Safari but the text on the left side of the Mail is way too small. Also where it says File Edit View Etc at the top also needs to be larger. My eyes hurt after 10 minutes because I am straining to see.
Info:
MacBook Pro, OS X Mountain Lion (10.8.3)
The small slot under the cd/dcd slot, is that for picture cards? Just noticed it. Is there someplace I can go to read up on general things about this computer, seeing as it came with little info?
View 9 Replies View Relatedwhen trying to print to ANY printer whether it be a network printer or a locally attached USB printer. The machine is as stated, an iBook G4. The OS is OS X 10.4.1. The printers involved are a Sharp ARM450n, a Sharp MX 2300 both networked and a Brother hl5150d, connected via USB. All printers show up in the printer dialogue box as installed, all of the latest drivers are installed and when I attempt to print, the system claims it printed, no matter what printer I send the print job to. I just don't get any documents. The print jobs just vanish! I have searched on this forum for a solution, not to mention googling Mac printer issues on the internet. I have searched high and low for a solution with no luck. I've tried stripping out all of the drivers and starting fresh. I've tried resetting the print system, I've tried appletalk/ethertalk, I've tried bonjour, I've tried tcp/ip printing, all to no avail. All of the other computers (an assortment of approximate 35 different Macs can ALL print to the printers with this one exception. The computer is hard wired to the network and can access the internet, I can ping the printers, ping other computers and I can also ping the computer that is having the print issues.
View 1 Replies View Relatedwhen I open pages, numbers, etc. that when they open they open big? In other words whenever I open a file it always opens small and they I have to drag the lower corner to make it cover the scree,.
View 1 Replies View RelatedSince to switching to an iMac from a PC, I have noticed that all of my images while looking great on my monitor print out way too dark. I had to actually record an action in Photoshop to adjust the images prior to printing. I could not understand why and just figured well it is what it is and not much I can do about it. However, on reading the June issue of Shutterbug magazine, there was an article in there in which they specifically mentioned the iMac,and the problem that was being experienced by everyone, professionals and amateurs alike with the "dark" prints, and put it down to the fact the iMac monitor was too bright ergo the issue with the dark prints.
Has anyone found a way around this rather than having to adjust the image way out of range in order to get it to print correctly and then revert to a prior state? Please.
PS - I am using an EPSON R220 and an EPSON 1400, both of which printed fine with my PC. (OK Mac lovers, don't jump down my throat. I love my Mac. it just has a few quirks - like all computers - that need to be unravelled.)
I have set up the imac with parallels and loaded xp pro and some software, one of which is Publisher from the Office 2003 suite. I have a HP 8550n colour laser printer attached to the imac via the parallel port on a port replicator and this prints fine when printing from the imac side of the story. When I go into parallels and xp pro and Publisher and create a document it simply wont print. There is only one printer attached to the imac at the moment, the document seems to leave the screen (as such) but it never gets to the printer.
View 7 Replies View RelatedI have an iMac 2.4 GHz with 2 GB RAM. My printer is a Canon PIXMA iP5200, which is connected via USB cable to a Maxtor Shared Storage Plus external hard drive. The hard drive is on my home wireless network.
This setup has been working fine for two years with my Windows computers; however whenever I try to print from the iMac I get an error message saying "Network host '192.168.1.66' is busy; will retry in 5 seconds. That's followed by another message saying 10 seconds, and so on up to 30 seconds. Needless to say I never do get a successful print.
The computer can see the printer and says it is "idle" and "ready." There are no other jobs waiting in the queue. The printer was setup with Internet Printing Protocol. The driver is correct and the firmware for the Maxtor drive is up to date.
Got a iMac running OS 10.6, and am wanting to print from a Samsung ML-1710P printer connected via serial port to a XP PC. Everything seems to all be communicating with each other, except I eventually get a print error on the XP machine in the print manager. Can anyone help with this?
Notes:
- the computer and printer can be seen by the mac.
- when a print job is sent, the mac spools and sends it "ok"
- the XP print manager status changes to "printing" then after about 1 min changes to an error.
- the latest driver for that printer is installed on the XP machine.
- I have tried to use the Generic Postscript Printer driver, the Generic PCL Laser Printer driver and an old Mac OS10.3 driver from the Mac end. There are no newer drivers available. I have shared this successfully printer before, but only from another windows machine.
just converted and purchased a 21.5" iMac this weekend, he took advantage of that rebate offer on printers and picked up the black HP wi-fi printer. Anyhow he does not have an airport extreme or any type of wireless router since his iMac is right next to his modem, so he is using Ethernet.
So I tried setting up a wireless network using his internal airport card in his iMac and this worked out great i enabled internet sharing and printer sharing. For some reason when i try to connect his printer with his network it says that the network is not within reach even though the printer is right next to the iMac. Am I doing something wrong? is there something I'm missing? I know the wi-fi network is working properly because he is able to connect with his iphone and I was able to connect with my MBP.
i am having trouble printing to PDF from any program. i have an imac (OS X, version 10.4.11) and anytime i try to print to pdf the job starts to spool, and then the print job is stopped (it says "jobs stopped"). anytime i press the "start jobs" button it just stops the job again. do i need to download a new driver?
View 1 Replies View RelatedI have an Epson XP 610 printer on my iMac. This is a new printer but when I attempt to print an envelope from Contacts or an App I purchased some time ago which uses Contacts I get the address but also a rectangular black filled in box area towards the left of the envelope. It does not appear on the preview screen just on the printed copy. All other apps such as numbers or notes etc all print out fine. This has only appeared since I have used this new printer.
Info:
iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)
I have bucked the household Wintel trend and bought an iMac. I'd like to use our Kyocera printer which everyone else connects to via our WiFi (linksys) but my iMac doesn't see the device (internet yes). I installed bonjour for windows on the primary machine and it doesn't see the printer either. I have checked printer sharing everywhere to no avail. I am running OS X 10.5.6 and the rest of the machines in the house are Windows XP.
View 3 Replies View RelatedI have an HP 8000 hooked up with a USB cable. I've tried disconnecting everything, restarting, trying different ports, nothing is working. I also tried resetting the print system in system prefs, reinstalling the drivers as well. When I try to print the printer just sits there. Its always stuck on sending print data. I don't use this printer often but it used to work and I would get this problem once or twice every few months. I solved it just by restarting but now it wont go away.
View 7 Replies View RelatedWe have a saving printer at our office that will not print no matter what I do, the OS is version 10.5x on a iMac. It sees the printer as a IP or ldf but it won't print! I know the printer works cause we print with windows PC's? The iMac is on a windows domain running a Mac OS.
View 7 Replies View RelatedI am not being able to print address labels from Contacts with the correct salutation, e.g.
Mr & Mrs A Smith
Anyroad
Anytown
etc
All I seem to be able to do is print Adam Smith or A Smith which is fine if he wasn't married to a fireball who would be mightily upset not to be included in the address label particularly at Xmas - neither do I want to print Adam & Fireball Smith ...
Info:
iMac (27-inch Mid 2011)
My printer won't stop printing in duplex mode. I have disabled all duplex settings and it's still printing double sided.
Info:
iMac, OS X Mavericks (10.9.1)
What is happening to my computer. This is the 2nd time it does this: all of a sudden the screen becomes black with reverse fluo colors.
I have to force quite with the push button & restart it. I repaired the permissions & restarted it. It's working again, but I am wondering if I have an alien in it.
Specs details:
iMac, 3.06GHz Intel Core 2 Duo, 4Go 1067 MHz DDR3, running Os X 10.6.8
I attached my Imac to the Airport and the printer to the Airport. It's a Canon Pixma MX700. The airport utility sees the printer but when I try to print, the Imac does not see the printer. I hardwired the Imac to the Airport because I assumed the connection speed woud be better. Could this be the problem? I am able to get on-line from my laptop PC so I know the thing is working. I have not tried to print from the laptop.
View 2 Replies View Relatedcurrently i have a blackbook and imac core duo, 17 ". My macbook beats the imac in everything except graphics. Before i got my imac i seriously considered a g5 dual 2.0, but the money wasnt there. I see an apple refurb dual 2.0 for 1599, and im sure i cud get one a lot cheaper used here or on another board. How much of a performance increase will i see IN APERTURE going to the PM, if any? i would need a good increase to justify it, and eve then im not sure my parents would be ok with me spending a few hundred bucks to upgrade
View 5 Replies View RelatedI am doing a presentation for a class thingy in technology about new media and i'm trying to express how when macintosh youtubers started uploading video blogs when they switched to intel/intel made iMacs and about this media blah blah blah. In the pic attached is that a iMac G5 or intel. I see spot light on the top right so it's either running tiger or leopard. I thought I saw a apple remote magnetic thingy on the side. Did the iMac g5 have one?
View 21 Replies View RelatedMy intel 2006 iMac recently died, and I'm wondering if I could one of the 1GB RAM sticks into the a G3 iMac I own. And more importantly: If I could put the hard drive from the intel iMac into the iMac G3.
The intel iMac was made in late 2006 and the iMac G3 was made in 1999, 1998 or 2000.
