We have a saving printer at our office that will not print no matter what I do, the OS is version 10.5x on a iMac. It sees the printer as a IP or ldf but it won't print! I know the printer works cause we print with windows PC's? The iMac is on a windows domain running a Mac OS.
View 7 RepliesBeing the only Mac user in my house -however streamlined it is-, does hold a few problems. I have set up my iMac, and have happily joined my Windows home network, file sharing does work easily and neatly but as I found out the other day, printing from a Mac that is connected to a Windows based network can be very difficult. So for a long time now, I have been trying to set up my iMac (connected via WiFi) so that it prints over my home network. The printer; an EPSON TX100 is connected to the USB port in a Windows XP desktop and I have set up Printer sharing. The desktop is connected to my D-Link G604T.
I have added the printer through System Pref: Print & Fax:+:Windows tab: 'network':'computer':'printer' and have tried using both the Generic Postscript driver and the specified printer driver.
When I go ahead and print, the printer icon appears in the dock and then quickly disappears without a printout. I have replaced the ink and paper but still no luck. I have tried the methods suggested on some other threads, but none have succeeded. I would be happy to provide any extra information and try anything. Networked printing works with all Windows computers in the house including a NEC laptop, so why wont it work with a Mac?
I have a Windows XP Desktop with a Epson Stylus S21 connected to it with bonjour downloaded onto it. Using the step-by-step guides, I've managed to connected my MacBook Pro to the printer over the system and have managed to print. The only problem is, when I do send a document to print from my MacBook it only prints out a blank page with nothing printed on it. I know that the two are connected as I can send things to print, and it's not an issue with the printer as my desktop is able to print fine.
Info:
MacBook Pro
I just bought a Toshiba satellite laptop with Windows 7 and am trying to set up my printer. I have a Canon Pixma MP500. I'm using my airport express for the router. I have no trouble connecting to the internet. It works perfectly. The problem is trying to get my printer to work with the airport. I've tried creating a new port with the ID address but my printer does not show as an option. Of course I can't find the installation cds (figures!). I have been able to add the printer under the local printer, but then I have to go back into the set up network/blue tooth option and it recognizes it. But then when I try to print it says that something is in the print queue blocking the current printing, but there is nothing there.
View 4 Replies View RelatedI have a Canon MX310 hooked up via a USB hub (shared with a HD) to an gigabit AEBS. Everything works fine under Leopard but no Windows boxes (either bootcamp or otherwise) can see the printer as being online. I have the latest Bonjour and even tried manually installing the printer. I checked the port/IP and everything is as it should be. Airport Utility says that printer is being shared over Bonjour and the Bonjour Print Wizard has no problem finding the printer for me to set up but the printer appears offline and won't print. I have rebooted the AEBS. All boxes are running Windows 7.
View 3 Replies View RelatedMy mac is connected to a windows computer and printer. Its always printed ok but now any document it prints appears in a mirror image. The print preview page shows that it should be printing normal but its not.
View 1 Replies View RelatedI have a new 27" i7 iMac with OSX 10.6.4 and need to connect it to our work place network that runs a Windows 2003 Domain Controller etc. I've never touch an Apple/iMac before and I don't know much of anything about them. I'll tell you this much, I LIKE THIS MACHINE! WOW! I really like it! So I'm pretty sure I have it on the network... maybe. But the biggest problem I have is when I log on as the user (and it indicates "Network" under the user name), I can see the network resources, the user folder is available down on the Dock but when I make changes to the Desktop, Dock etc. they don't save when I log out and log back in. So I hope someone here can help point me in the right direction. I have done a lot of Google and other forum search but I'm not really finding my answer.
View 3 Replies View RelatedGot a iMac running OS 10.6, and am wanting to print from a Samsung ML-1710P printer connected via serial port to a XP PC. Everything seems to all be communicating with each other, except I eventually get a print error on the XP machine in the print manager. Can anyone help with this?
Notes:
- the computer and printer can be seen by the mac.
- when a print job is sent, the mac spools and sends it "ok"
- the XP print manager status changes to "printing" then after about 1 min changes to an error.
- the latest driver for that printer is installed on the XP machine.
- I have tried to use the Generic Postscript Printer driver, the Generic PCL Laser Printer driver and an old Mac OS10.3 driver from the Mac end. There are no newer drivers available. I have shared this successfully printer before, but only from another windows machine.
I have an HP 8000 hooked up with a USB cable. I've tried disconnecting everything, restarting, trying different ports, nothing is working. I also tried resetting the print system in system prefs, reinstalling the drivers as well. When I try to print the printer just sits there. Its always stuck on sending print data. I don't use this printer often but it used to work and I would get this problem once or twice every few months. I solved it just by restarting but now it wont go away.
View 7 Replies View RelatedMy printer won't stop printing in duplex mode. I have disabled all duplex settings and it's still printing double sided.
Info:
iMac, OS X Mavericks (10.9.1)
I looked for a introduction forum but couldn't see one so hello guys and gals. Great forum you've got here..Right my issue is as follows.I have a new iMac Pro on snow leopard 10.6.4 and it is linked to a Windows SBS server 2007 but i don't think i've done it properly.When i switch the machine on all i get on boot up is 1 local user Sometimes i can leave it and it will offer me the 'Other' option which i can then login to the server But most times it doesn't to that... I have to logon as that local user and then unbind the windows domain and rebind it then when i logoff it shows me the 'Other' user Also another thing thats annoying is it doesn't map anything automatically i have had to create a alias icon on my desktop to go to my server space and it can take up to a minute to connect to the server..
View 3 Replies View RelatedI attached my Imac to the Airport and the printer to the Airport. It's a Canon Pixma MX700. The airport utility sees the printer but when I try to print, the Imac does not see the printer. I hardwired the Imac to the Airport because I assumed the connection speed woud be better. Could this be the problem? I am able to get on-line from my laptop PC so I know the thing is working. I have not tried to print from the laptop.
View 2 Replies View RelatedI have bucked the household Wintel trend and bought an iMac. I'd like to use our Kyocera printer which everyone else connects to via our WiFi (linksys) but my iMac doesn't see the device (internet yes). I installed bonjour for windows on the primary machine and it doesn't see the printer either. I have checked printer sharing everywhere to no avail. I am running OS X 10.5.6 and the rest of the machines in the house are Windows XP.
View 3 Replies View RelatedWhen i try to migrate my windows account with the Windows Migration Assistan, in OS Lion 10.7 i only see local accounts like Administrator, but not domains account... I run the migration assistant from the domain account that I want to migrate...
Help me!
Info:
MacBook Air, Mac OS X (10.7)
I wondered if it was in anyway possible to print wirelessly from my MacBook. Seems simple enough right? Well, the thing is I don't have a wireless printer. It's a normal inkjet Epson and it's connected via USB to my desktop which is running Vista Home Premium. Is there anyway I can somehow forward the document to my desktop and it'll start printing? Oh yes, my router is standard, it doesn't have any USB ports. Also anyone know any wireless HDDs? Time Capsules rather pricey especially in the current climate.
View 3 Replies View RelatedI have been trying everything I can think of to get 2 PC's on our home network to print on my Canon MP610 which is connected via USB to my MacBook Pro and the two PC's recognise the printer and add it as a device but when I try to print, the message "access denied, unable to connect" is displayed. If it's of any relevance, I cannot get the PC's to access the Public folder on the MBP over the network either.
View 8 Replies View RelatedI have already done this successfully with one PC laser printer using the built-in OS X System Preferences utilities. I have tried the CUPS method. I do not know what uname/pword combo it wants. There is only one account on this machine and no password. That combination is unacceptable to CUPS. Give me this info and I'll give CUPS another shot. Through the OS, when I get to the step of selecting the driver from the list, the driver is not listed even though. I just installed it with the original driver disk from the mfr. Is there a way to get the printer driver I installed to show up on the list of available drivers I am offered? My other printer was in the list, connected just fine, and I can print to it with no problems.
View 1 Replies View RelatedI have connected my Macbook pro to the printer and all looks connected, except when I print error message reads not connected?
View 2 Replies View RelatedI have always used Postscript laser printers to print EPS (vector) graphics - eg from Illustrator or Quark. We recently added to our network an Epson colour photo inkjet printer.
Much to my surprise, I just successfully printed straight from Quark a document that included some text and a (resizeable) EPS graphic. This was from a PowerPC in Classic running OS 10.4.11. A further document with a series of differently sized EPS graphics printed correctly too. There is AFAIK no Postscript engine in this printer.
I now rather gather this may all be down to the post OS 10.4 operating system which is fielding the print file and interpreting it - thus causing my photo printer to successfully do what I thought impossible.
Is there no need ever to buy a Postscript printer again? (The printer is an Epson PX730Wd - US name Epson Artisan 730.)
Info:
MacBook Pro (10.7.2) Power Mac G5, Mac OS X (10.5.8), OS 10.4.11 - Classic rules!
i have a machine in a workgroup called 21. the machine name is icey.i have a domain called avery. i am able to access files on the domain from icey but when i try to connect to a printer it says i dont have sufficient access. the printer in question is a resource on a machine called marble. and the printer itself is called new_printer and yes its being shared. actually i cannot connect to any printers on the domain from icey.
everyone on the domain can access the all printers however no one from 21 can connect to it. it was necessary for me to build 21 but it is still important for 21 to be able to use avery resources. is there any way i can get this to connect?
I'm trying to connect my leopard macbook to a Canon Pixma MP210 that his hooked up to an XP machine. Sharing is enabled in XP on the printer and I can successfully add the printer to the mac in system preferences. I've downloaded the proper drivers from Canon's website and selected them for the printer. The problem is that when I try to execute a print job, the print queue comes up and hangs on status "printing."
Also, on the XP machine, the print queue recognizes a job is being requested but the status hangs on "spooling." The document never actually prints. Finally after a couple minutes, the print queue in the mac has an error stating: "Error Number : 311 Printer is in use or an error has occurred. If an error has occurred, eliminate the cause of the error."
I recently bought a 2009 Mac Mini and now I need a printer. I've been looking at Canon and HP. Can anyone recommend a good quality printer, under $90, has cheap ink, and is a All-in-one printer? I will mainly use the printer to print reports and pictures.
View 4 Replies View RelatedNot sure that this problem is with my Mac or not, but suddenly my printer stopped printing and a window opens that says that the printer is "off line". I unplugged the printer and rebooted the computer and re-plugged the printer in thinking that might cure the problem, but same message came up "printer off line". The printer shows up in the finder and I am at a loss as to a possible cure without having to buy a new printer.
View 1 Replies View RelatedI was trying to set up my printer (HP 1515) so that I can print to it even when I am not on the LAN, but also using WAN. The airport extreme has now been set up for Bonjour and all that, but the HP printer is connected using an Ethernet cable, NOT USB. It seems the Airport printer sharing is made for connecting a printer to the Airport USB port, and NOT for any ethernet printers.
Is there any way I can print from outside - WAN - to my LAN printer, connected via ethernet to my airport?
I my printer connected to my airport express and am trying to print from a XP machine. I have installed bonjour and found the printer and set it up and everything. It is available as one of my printers from the print screen in XP. Everytime I try to print the job fails.
View 2 Replies View RelatedIn System Preferences > Print & Scan, double-click a printer and click on the Printer Setup button. Under the General tab, in Snow Leopard it used to list the printing protocol / url used to connect to a printer. In Lion it doesn't show that information anymore. Is there a way to still find out what protocol the print queue is trying to print via?
Info:
MacBook Pro, Mac OS X (10.7.4), 15" Unibody Mid-2009
I am trying to connect to a windows network printer through my MacBook Air. I can connect to the printer via the windows network and can send documents to print. The document goes through to print but at the last second it says there is an error. When looking on the network windows computer, in which the printer is installed, I can see the document has gone through to print using the printer dialogue box for microsoft, but it details there is an error and the document doesn't print.
It seems that they are connected but there is still an error.Both Windows and Mac computers are up to date currently and the printer is a HP Deskjet F4180.
My company has one mac user with a Macbook Air, we have a Windows 2008 r2 domain.I'm wondering if it is worth joining him to the domain, what benefits are there for a mac user? We use Exchange 2007 and change our passwords every 90 days.One concern is when the user is out of the office the cached password can become out of sync with the domain password.
Info:
MacBook Air, Mac OS X (10.7.3)
i have been given the task of trying to get mac machines printing on Ricoh printers on a windows network in a small private school. I have gone through the appropriate steps of installing the drivers for the printers through using PxlMono, Foot, Ghost, etc... to make it so I can work without the cards in the printers.
However, adding the printers to the mac is a whole new problem. The machines are added appropriately to the domain. The necessary printers are now showing up in the open directory portion of the adding printers window. However, upon trying to add them, it states the following: An error occurred while trying to add the selected device.
Bad device-uri "smb://****-DC1.****.loc/High School Workroom RICOH".
Are the spaces in the name creating issues? There is another printer on the network that worked with a different mac that appears to have spaces in the name as well. Adding with IPP doesn't, saying that there was an error with it and asks if i want to install it anyway. If I do install it anyway, it becomes unresponsive regardless. I've even gone through the CUPS menu in port 631 and tried adding with IPP that way, and it still doesn't work. I'm about to go insane trying to get these dang things to print. I have 5 different macs trying to connect for 4-5 printers each for this craziness.
I recently reinstalled my operating system (OS 10.4) from the original system disks in a vain attempt to stop a problem with Mail (it has started demanding my password repeatedly before it will send any mail). I then had to download and reinstall all the various upgrades since.
Since then it no longer recognizes my Epson SC740 printer. It won't let me install the driver from the original CD - it comes up with the error message "You cannot open the application 'Installer' because it is not supported on this system."
