PowerPC :: IBook G4 Disk - MacPro's Wont Work On It
Sep 13, 2009
I have an iBook G4 14" 1.33 768mb 60HD with 10.4.11 installed as it has previous users, i want do to a total clean up on it, but I dont have the original disks, where could I find them? or find a way to do a restore on it?
I have a MacPro(2006-07) which came with Tiger also but I Tried on the macbook thinking it would work, but it doesnt, when it boot up shows like a black log screen saying that Drives for powerbook 5.6 havent been found something like that, and asks t turn it off.. tried like 3 times, all the same, so I quit.
All I want is reinstall tiger in it, since Leopard probably will slow it down too much, im upgrading to 1.25gb soon also...
1) Can I take my secondary drive in my Powermac G5 and install it into my forthcoming Mac Pro ? Or is the SATA interface different on the new machines.
2) Ordering extra memory from Crucial to save $, what's the situation with 'fans' and things on the memory. I'm confused, totally. Does the mac pro's require additional heat cooling on the memory, does the memory from crucial come with this, is it easy to install like the powermac or am I going to be left floundering like a fish out of water....
I have a G3 iBook and just the other day the display stopped working. There were no signs of the display going bad, it's just went. Am I able to boot the iBook via Target Disk Mode on my PowerBook and run the iBook Hardware Test CD on it? Also, can I reboot my PowerBook and choose the iBook as the startup volume?
I know how to do Target Disk Mode but the latter I'm not sure about.
Quick (hopefully!) question: Will RAM from a G4 Powerbook 1.33 GHz (PC2700) work in an iBook G4 1.2 GHz, which normally takes PC2100?
Reason for the question is that I have one of each, and am going to sell the iBook. I'd like to transfer one of the 256 Mb sticks from the PB to the iBook and then replace that stick with a 1 Gb stick.
I have a white g3 ibook dual usb. I put in a bigger hard drive and can't install tiger which is a cd not dvd that boots fine in my imac. Cd drive will not eject with eject (f12) key or fn f12. I have to pull it open manually. I can reset the nvram by booting into firmware and typing reset all. I can't boot up to a screen with a refresh arrow and a right arrow that I can click on but nothing happens. All I get a start up is a folder with a blinkin face question mark.
I just got an apple ibook g4 from a pawn shop. But it did not come with a recovery disk. The master password is still on there and I don't know it. What should I do? Who ever had it before me did not clear everything off of it.
I am changin my iBook G4s hard drive. I am referring to a well written guide published on [URL]. But I am stuck on a step. For removing the front panel, there is screw hidden under a magnet. Somehow I can not remove that magnet. I have tried using L end keys, screw drivers, nose pliers and even a powerful magnet. This disk would not come out!
broken ibook. after starting it up for the first time the internal harddrive and the touchpad dont work. when i attach an external usb mouse i can boot from cd. is this a logic board failure and i am out of luck or could it just be a loose connection or something else repairable?
I have a iBook G4 with a broken backlight. The iBook was custom painted Maroon (Only the back part of display and around the keyboard), and I don't like it. Will an iBook G3 12" display work on the G4?
The last time I tried to insert a disk it would not go in, something (not a disk) was stopping it once it had traveled about half way in.
I then noticed that when waking from sleep or turning on, the normal noise was very different, cut short, and sounded like it was struggling against something.
I believe the mechanism of the drive has somehow failed. Does anyone have any solutions?
It is a iBook G4 1.33GHz with 1.25GB ram installed if that helps.
I'm trying to zero the data on an iBook hard drive before selling it. When I connect it to my Powermac via firewire in Target Disk Mode, it shuts down completely about 30 minutes into the proceedure (and yes, the power adapter is connected).
I've got an early '08 MacBook and an iBook G4. The iBook will only work for a few minutes before freezing completely.
I want to use my MB to get info off the iBook, but when I follow the instructions to start the iBook in Taget Disk mode, the MacBook asks if I want to 'initialise' the harddrive. What's that about?
How can I get the data off my iBook (ideally without re-installing the OS)?
This iBook G4 will not boot. I can boot it into safe mode, but that is about it. I have tried resetting the PRAM, to no avail. It cannot even boot off of an OSX disc. When I try to boot it normally, it just shows the Apple symbol, but no progress wheel thing spinning. When I try to boot it normally, it appears as if the hard drive is not being read from/written to, because it is dead silent, but when I boot into safe mode, you can hear the HDD noise. When I booted into safe mode, I checked the HDD's SMART status, and it says "Verified," so I do not think that the HDD is at fault. However, it still has its original HDD from 2004.
I have a Logitech Mediaplay Mouse that will not work on my iBook: it reads the receiver, but nothing about the mouse works. At first I thought it was because it must use a non-standard driver (and OS X isn't officially supported in the documentation), but after a little experimentation I've found that it works perfectly on my Cube (running Panther), my dad's Powerbook G4 (Tiger), my brother's Sawtooth G4 (Tiger), and every PC I have. My dad and brother don't use USB Overdrive, but the mouse worked perfectly with USB Overdrive on my Cube and it doesn't work on my iBook whether USB Overdrive is installed or not. I have never had any problems with peripherals and my iBook before. I love this mouse, so someone please help me figure how to make it work!
i splashed some theraflu on the right side of the keyboard approximately 3 days ago. as many had mentioned, i removed the keyboard and carefully removed any liquid residue i could find and kept my computer off for a few days. today i went to figure out the damage and everything seems to work okay in terms of the computer turning on and stuff. the keyboard is still acting up though. the left side of the keyboard works mostly okay, but if i press certain letters, the number along with random number appears. the right side of the keyboard, on the other hand, several keys don't even respond at all. from these "symptoms" do you guys think the only thing that i may have to replace is the keyboard or could these "symptoms" i've described be related to some other damage also? how much does replacing a keyboard usually cost? i'm thinking this isn't going to be covered by my warranty. lastly, i've noticed that when i do turn the computer on, it automatically starts in safe-mode.
My mom's iBook G3 has recently started doing this thing where its screen goes dark if you bend it back far enough. Right now the furthest I can open it is so it's at a bit over a 90 degree angle, or else it'll go dark. Does anyone know what could be causing this?
I'm internal-HD-shopping for a friend, and want to make sure I know: What terminology will identify drives I can put in this iBook? I know it's 2.5"--what else should I make sure of? Also--any kinds that would be better than others? It's a 14" G3 with Firewire and DVD-ROM. "New" as G3s go.
I have a 24" dell external monitor that I use with my 17" MBP. My wife would like to hook up her 12" ibook to the 24" monitor. Is this possible, and what cables would I need?
I have been given an iBook G3 l2 in. laptop.It has mac OS X 10.4.11 operating system.I went to the site for downloading windows media player and was told to use the flip4 mac . It keeps telling me mac error-50 and will not open.I have downloaded it 4 times and each time I get the same results.
Today I accidentally turned off my iMac by mistake (pressed off button twice while in sleep mode). And when I try to boot it when it comes to the little mac logo it says "this boot up disk does not work with this mac please restart I press restart and it says the same thing, also when it turned off with an os 9 in it and when I booted it I definatly did not press down c. I think it maybe the hd or is it possible to change boot priority?
I am a student who is currently starting to work on some at home projects with cartoon animation (Toon Boom) and Video Editing (Final Cut/After Effects). I have a Dual 2.0 G5 with 1G Ram. Would there be a significant advantage in upgrading to a Dual 2.8 Mac Pro? I could probably get 700-800 dollars for the current computer so, would dropping 2000 on a new tower give me a huge boost in performance? (Money is kind of an issue but not if the difference is staggering.) Or should I just upgrade the RAM on my current tower, be happy with what I have and quit jabbering?
Colleague and I at work are swapping desktops as I need ot run VMWare and he no longer does so I will be having his MacPro and he my PowerMac - whats the quickest way to swap? He's suggested swapping the HD's over but I dont think that will work due to the PowerPC and Intel software differences... right? If that wont work then how can we do it as painless as possible?
I recently had to upgrade the graphics card in my Mac Pro, however it won't boot up because the OS isn't update which is what is required. I have a G5 which I have put the MacPro hard drive into so that I could boot it up, update the software and put it back in the MacPro. The G5 recognises the hard drive when it is acting as a 2nd Hard drive to the G5's original but it doesn't show it as a startup option. I have tried having just the MacPro drive in the G5 without the original hardrive but then it doesn't boot at all. Both are running 10.5 and I can't understand it won't find it.
I have tried it the other way around, the G5 hard drive in the MacPro and it works fine and when I put the MacPro hard drive in as second Hard Drive it shows up as an option for startup but doesn't work as it isn't uptodate.
Hoping someone can help me figure this out. I swapped HDDs between a G5 and MacPro this morning. The MacPro was connected to a large LCD TV via HDMI for it's display (using a DVI to HDMI adapter) and it worked great for just scrolling images of our projects (no audio). When I put it's HDD in the G5 and connected it to the display the same way, I got nothing on the screen. Thinking it was a video card issue on the G5 end, I plugged in a different monitor and rebooted the G5. This time I got the flashing question mark folder meaning it couldn't find an OS to boot. So now I can't tell what the issue is. I thought HDDs between G5s and MacPros were the same? If not does this mean the older G5 drive won't work in the MacPro tower? (I haven't tried yet).
