PowerPC :: Won't Work With G4 Temp / Can't Work With Average

Sep 21, 2006

Just had to replace the logic board on my PMG4 DP 1.25GHz machine. For the life of me, I can't remember the operating temperature before I swapped the board. Currently it's running at 130F - 140F. This seem about right for the other folks running these machines?

View 6 Replies


OS X :: Won't Work With CPU Temp / Can't Work With Average

Mar 2, 2010

Is it normal for my CPU to be averaging 75�C? sometimes 80�C. I've a 3 windows from FireFox open, Thunderbird and the finder window.

iStat says the following:
HD 34�C
CPU 74�C
Enclosure Base 33�C
Enclosure Base 2 33�C
Enclosure Base 3 30�C
Enclosure Base 4 35�C
Heatsink B 60�C
Northbridge 47�C

View 13 Replies View Related

MacBook Pro :: Won't Work With CPU Temp / Sending Warning For High Temp

Mar 19, 2010

I downloaded a program to monitor my late 2008 unibody Macbook Pro's temperatures. Just a few minutes ago while playing music/playing an ONLINE game real briefly it warned me that my CPU temperature was too high. (167˚ F) Is that too high of a temperature? What should the "range" be?

View 4 Replies View Related

OS X :: Unable To Work With CPU Temp / Can't Control Temp

Nov 1, 2009

I was just adding some Quicklook plugins when my temps started to soar. I have restarted, repaired permissions, removed said plugins, and tried other accounts. Nothing is lowering the temps. Weird thing is is Activity Monitor is showing NOTHING using the processor nearly enough to jump my temps to 85 C with nothing running.

I'm "controlling" the issue for now by ramping my fans to full speed. Even with this I am hovering around 70 C...a good 10-15 C above what I am normally at (and was at 30 minutes ago).
*Note: Normally running fans at 6000rpm would give me temps in the mid to low 40 C range

View 2 Replies View Related

MacBook Pro :: Won't Work With Temp / Temp Rise After 10.6.3

Apr 6, 2010

I have a MacBookPro5,4 2.53GHz with one fan and only the 9400M. After updating to 10.6.3 the operating temperature seems to have risen from about 43 degrees C to about 48. It has been getting warmer here in Japan so the ambient temperature is different but I still think this rise in temp. is due to the update. I have smcfancontrol installed and set to 2500rpm instead of the normal 2000, but it seems to be not enough to keep the temp. under control, as it did before the update. Any relatively hard use of the cpu and the temp goes up to 60 degrees.

View 2 Replies View Related

Mac Pro :: Won't Work With CPU Temp / Goes Up To 65

Jul 5, 2009

I've just been watching something on BBC Iplayer (using opera) and the CPU temp is up to 65 (with ambient temp 33). Is this normal? (finished watching and it's now at 60.) Also, the last few days I noticed the mouse button not working properly, sometimes I need to click twice for it to actually work, and if I was holding down the left button to drag, it kinda lost it's connection (so while dragging and moving things around the desktop they'd stop while the cursor still moved as I was still moving the mouse... and the mouse button was still pressed in all that time). I'm thinking it could be to do with temps as it has been really hot here lately (but then shouldn't the fans kick in?).

I've done an archive and install but it was still the same last night (mouse 'click' seems to be working ok right now). I 'think' the temps have been going up to 69, but I didn't make a note for sure. Should I do a clean wipe and install in case one of the programs is conflicting or something?

View 24 Replies View Related

MacBook Pro :: Won't Work With Temp / 165+ F

Sep 14, 2009

I just started using the aluminum MBP 15" and used to have 13 Macbook aluminum. and as far as i can tell the 13" did not get as hot as my 15" I just installed a fan and temp controller and even with running the fan higher then default os 10.6 temps reached 165 F I freaked out and cranked up the fan to 5000 RPM and temps dropped so far. So, How hot are these MBP supposed to get until it no longer safe?? And its not even close to being where the MBP is: sitting in my office on a desk where its cold and i have to drink tea to stay warm.

View 15 Replies View Related

MacBook Pro :: Won't Work With Temp And Fan Rpm

Feb 10, 2010

im running at cpu temp of 82C with my fan running around 2000 rpm with the mbp in my sig. Is this a normal temp to fan rpm ratio? Why is bothers me is that im use to my Mb flaring up its fans every time it got hot.

View 16 Replies View Related

MacBook Pro :: Won't Work With SSD Temp / Running Hot

Sep 10, 2009

Does the macbook run cooler with an SSD instead of a traditional hdd? My 13" is running quite hot so I'm looking at ways to reduce the heat.

View 4 Replies View Related

Hardware :: Won't Work With SSD Temp / After Installation

Mar 10, 2010

So I just installed the new 200GB OWC Mercury Extreme SSD (SandForce Chip) in my 2008 Penryn (non-Uni) MacBook-Pro.

Seems pretty fast and all, but iStat is displaying a temperature of 263 degrees?#!#$%@@#

I know this thing can't be operating at 263 degrees, though I placed the temp monitor at the exact same location it resided on my prior 5400 RPM hard drive. Not sure what the problem could be.

View 13 Replies View Related

OS X :: Won't Work With Temp / Overheated And Shutdown

Mar 20, 2010

Alright I am wondering what temperature the computer has too get too in order to shut itself off. what I mean is, at what point will the compute shutdown or crash before it overheats? I think my mac mini (07 model) is getting too hot and it shut off a few mins ago (not gracefully shut down more like someone yanked the powercord out ) and I think that the shutdown may be related to heat problems.

idle temps: (celsius)
CPU heatsink:60

Fan RPM:5100rpm

Load Temps (celsius)
CPU heatsink:64

Fan RPM:5500rpm

View 8 Replies View Related

IMac :: Unable To Work With Temp / Frozen

Apr 27, 2009

It just froze on me about 20 min ago. All I was doing was listening to iTunes and browsing the music store. I looked at the temp of the computer and it seems kinda high, I don't know too much about this.

View 2 Replies View Related

MacBook Pro :: Unable To Work With CPU Temp / Shutdown

Nov 22, 2009

screenshot taken while converting movie to ipod/iphone format*

View 20 Replies View Related

MacBook Pro :: Won't Work With CPU Temp 100C / Fan Still At 2000RPM

Mar 14, 2010

I've notices a really strange behaviour with my 13" MBP. The fan simply doesn't go faster on high loads, which results in a CPU temperature that is far beyond the operation specification Intel provides.

Seems as if the SMC controller is kind of broken. I tried to reset it, but that didn't change anything. A PRAM reset also didn't work.

View 9 Replies View Related

MacBook :: Won't Find Recommended Temp / Can't Work With Settings

Feb 7, 2009

I was wondering wat the recommended temperature for the macbook 13". I've got SMC fan control and it shows mine it 56C but i set it to Higher setting but it doesn't stay onto the minimum speed i set it.

View 3 Replies View Related

MacBook Pro :: Won't Install Firmware Update / Can't Work With Fans And Temp

Feb 8, 2010

I'm nervous to install the Firmware update 1.3. As I've heard from a lot of people the update has crashed their mac. I know it has to do with the fans and temp. My Mac book pro is running at 135 F at 2000rpm is this ok? Is it too overheated. Should I install the firmware I'm so nervous to install it just in case it breaks. Here's the rest of my specs...

Model Name:MacBook Pro
Model Identifier:MacBookPro3,1
Processor Name:Intel Core 2 Duo
Processor Speed:2.2 GHz
Number Of Processors:1
Total Number Of Cores:2

View 2 Replies View Related

PowerPC :: Average Battery Cycles With Reasonable Charge Time?

Jan 1, 2006

I was just looking at the battery info for my PB which is about 1.5 years old. It says that my cycle count is 59. I was wondering how many cycles the average battery will do with a reasonable charge time? My absolute max capacity is 4400. I found the information with the following command:
ioreg -l -w 0 | grep IOBatteryInfo

View 12 Replies View Related

PowerPC :: Slow Internet Downloading Speed / Download Speeds On Average Around 405kbps

May 2, 2010

i've got a 6 year old 12 inch powerbook G4 1.33 ghz that has internet speeds around 5177kbps, but overall its a bit dated sooo I wanted something a bit more new. I recently picked up a white 2.4 ghz Intel Core 2 Duo Macbook, HOWEVER the internet wireless speeds on it is dismal in comparison. I'm getting download speeds on average around 405kbps and upload speeds are pretty much non-existant! I've matched both of them to the same internet settings and they are both running 10.5.8. So again I'm stumped and if anybody can give me some idea as to what to do, Id greatly appreciate it!

View 4 Replies View Related

PowerPC :: Will This RAM Work In A G4 1.33

Jan 17, 2008

I know that the powerbook G4 takes PC2700 333MHZ DDR, But I thought that this RAM on newegg may be backwards compatible.

Will this RAM Work in a Powerbook g4 1.33??


View 2 Replies View Related

PowerPC :: 4gb Ram To Work In 1.8 G5?

Sep 6, 2008

I'm trying to install 4GB of RAM in my G5 1.8. This would be max ram, but I can only get 2 sticks of my 1GB ram to work at a time.

View 9 Replies View Related

MacBook :: Caps Lock Will Not Work At All On 2008, Still Won't Work When External Keyboard Is Connected

Feb 22, 2012

I have a 2008 black macbook with 10.7.2 installed (2.4 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM). When I press caps lock, no green light turns on and letters remain in non-capital form. Even when I hold Caps lock for a few seconds, nothing happens. If I physically connect an apple keyboard via usb to my computer, caps lock doesn't work. 

View 4 Replies View Related

PowerPC :: To Work With Final Cut Pro On G4

Nov 19, 2006

is it possible to work with final cut pro on Powermac g4 1,25 ghz.2x with 80+80 gig hard??i going to buy that,and don't know if it's worth!

View 3 Replies View Related

PowerPC :: Will PB G4 1.33 RAM Work In IBook G4

May 5, 2007

Quick (hopefully!) question: Will RAM from a G4 Powerbook 1.33 GHz (PC2700) work in an iBook G4 1.2 GHz, which normally takes PC2100?

Reason for the question is that I have one of each, and am going to sell the iBook. I'd like to transfer one of the 256 Mb sticks from the PB to the iBook and then replace that stick with a 1 Gb stick.

View 3 Replies View Related

PowerPC :: Using G4 TV / Can't Work With Videos

Jan 30, 2008

So i bought a 3.50 cable from ebay that plugs into the back of my Powermac G4 and allows it to be put on a tv via svideo or composite vga to svideo/composite so i plug it in and i get nothing on the TV so like idk what i did wrong i adjusted the video on the Powermac to 800 x 600 (or the smallest it would go) and i still get nothing except for a black screen?


View 6 Replies View Related

PowerPC :: Will G4's Drives Work In New Mac Pro

Feb 2, 2008

In my current dual 800mhz PowerMac G4, I have two 80gb hard drives which were ordered from Apple (didn't know better at the time). Will I be able to put them in my Mac Pro when it comes in a few weeks, or are they too old to be compatible?

View 5 Replies View Related

PowerPC :: Will This RAM Work In A Powerbook?

Feb 26, 2008

Im pretty sure it does but I just wanted to check that this would work in my 12" 1.5GHz powerbook?

Also does anyone else know of anywhere else cheaper in the UK or have any suggestions/observations at all?

View 1 Replies View Related

PowerPC :: Will This RAM Work On Imac G3?

Aug 2, 2008

i recently upgraded the hard drive in my imac g3 to a 40GB and installed tiger, is currently has 256mb. i want to upgrade it to 1gb, will this be compatible?... [URL]

View 2 Replies View Related

PowerPC :: How To Get PS3 Eye To Work With EMac With 10.5.6

Mar 28, 2009

Trying to get the ps3 eye to work with my emac. OS X 10.5.6. I have downloaded the latest macam and installed it, dragged the component over to the folder, and copied the component into the library/quicktime folder. When I open macam it recognizes that I have the ps3 eye hooked up, but the screen is black. Skype and yahoo also recognize the camera, but the cam monitor screen is black. I really want this to work, and have seen many posts from people with the emac/eye/macam combo and a lot of people have said it works.

View 2 Replies View Related

PowerPC :: Will My Emac Work With 10.6?

Jun 3, 2009

I have an eMac 1GZ with 1GB Ram and G4 PPC will 10.6 work?

View 2 Replies View Related

PowerPC :: G4 Backlight Does Not Work

Jul 22, 2009

I have a powerbook g4 17 in a1107. The back light does not work. I am not at all sure what the display resolution is. If I install an lcd screen with anything other than the original resolution, will the notebook be able to support it?

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved