PowerPC :: Will This RAM Work On Imac G3?
Aug 2, 2008i recently upgraded the hard drive in my imac g3 to a 40GB and installed tiger, is currently has 256mb. i want to upgrade it to 1gb, will this be compatible?... [URL]
View 2 Replies
ADVERTISEMENT
PowerPC :: Will IMac Internal Modem Work In G4?
Oct 10, 2007The iMac is a G3 Slot-load SE, and the PowerMac is a G4 450MHz AGP. I happen to have an AGP that only came with the telephone jack, but no modem card connected inside. Both modems look the same in photos: 661-2213 (slot load) & 661-2186 (AGP). Is the only difference that the newer one has flex K56?
View 2 Replies View RelatedPowerPC :: IMac G3 Left Speaker Doesn't Work
Sep 23, 2010Ok so my iMac g3 has a left speaker that doesn't work. The right one works fine and when I turn the volume up the left speaker kind of buzzes. Is it even worth replacing the internal speaker? (IIRC it looks pretty difficult)
View 6 Replies View RelatedPowerPC :: Older G5 Versus IMac Versus MacBook Pro For Work
Oct 25, 2007So I have a 1.8ghz dual G5 with 3gb of ram for work. I mainly work in Adobe CS and do a far amount of Photoshop work. At any given time I may have all of Adobe CS plus Office and a few other apps running -- and a gazillion fonts. Went to the store and saw the new 24" iMac. How would a new iMac compare to my late '04 1.8DP G5? On that same note, how would a new MacBook Pro compare to the above?
View 5 Replies View RelatedPowerPC :: Won't Work With G4 Temp / Can't Work With Average
Sep 21, 2006Just had to replace the logic board on my PMG4 DP 1.25GHz machine. For the life of me, I can't remember the operating temperature before I swapped the board. Currently it's running at 130F - 140F. This seem about right for the other folks running these machines?
View 6 Replies View RelatedPowerPC :: Will This RAM Work In A G4 1.33
Jan 17, 2008I know that the powerbook G4 takes PC2700 333MHZ DDR, But I thought that this RAM on newegg may be backwards compatible.
Will this RAM Work in a Powerbook g4 1.33??
[URL]
PowerPC :: 4gb Ram To Work In 1.8 G5?
Sep 6, 2008I'm trying to install 4GB of RAM in my G5 1.8. This would be max ram, but I can only get 2 sticks of my 1GB ram to work at a time.
View 9 Replies View RelatedPowerPC :: To Work With Final Cut Pro On G4
Nov 19, 2006is it possible to work with final cut pro on Powermac g4 1,25 ghz.2x with 80+80 gig hard??i going to buy that,and don't know if it's worth!
View 3 Replies View RelatedPowerPC :: Will PB G4 1.33 RAM Work In IBook G4
May 5, 2007Quick (hopefully!) question: Will RAM from a G4 Powerbook 1.33 GHz (PC2700) work in an iBook G4 1.2 GHz, which normally takes PC2100?
Reason for the question is that I have one of each, and am going to sell the iBook. I'd like to transfer one of the 256 Mb sticks from the PB to the iBook and then replace that stick with a 1 Gb stick.
PowerPC :: Using G4 TV / Can't Work With Videos
Jan 30, 2008So i bought a 3.50 cable from ebay that plugs into the back of my Powermac G4 and allows it to be put on a tv via svideo or composite vga to svideo/composite so i plug it in and i get nothing on the TV so like idk what i did wrong i adjusted the video on the Powermac to 800 x 600 (or the smallest it would go) and i still get nothing except for a black screen?
POWERMAC G4
DUAL 500 MHZ
PowerPC :: Will G4's Drives Work In New Mac Pro
Feb 2, 2008In my current dual 800mhz PowerMac G4, I have two 80gb hard drives which were ordered from Apple (didn't know better at the time). Will I be able to put them in my Mac Pro when it comes in a few weeks, or are they too old to be compatible?
View 5 Replies View RelatedPowerPC :: Will This RAM Work In A Powerbook?
Feb 26, 2008Im pretty sure it does but I just wanted to check that this would work in my 12" 1.5GHz powerbook?
Also does anyone else know of anywhere else cheaper in the UK or have any suggestions/observations at all?
PowerPC :: How To Get PS3 Eye To Work With EMac With 10.5.6
Mar 28, 2009Trying to get the ps3 eye to work with my emac. OS X 10.5.6. I have downloaded the latest macam and installed it, dragged the component over to the folder, and copied the component into the library/quicktime folder. When I open macam it recognizes that I have the ps3 eye hooked up, but the screen is black. Skype and yahoo also recognize the camera, but the cam monitor screen is black. I really want this to work, and have seen many posts from people with the emac/eye/macam combo and a lot of people have said it works.
View 2 Replies View RelatedPowerPC :: Will My Emac Work With 10.6?
Jun 3, 2009I have an eMac 1GZ with 1GB Ram and G4 PPC will 10.6 work?
View 2 Replies View RelatedPowerPC :: G4 Backlight Does Not Work
Jul 22, 2009I have a powerbook g4 17 in a1107. The back light does not work. I am not at all sure what the display resolution is. If I install an lcd screen with anything other than the original resolution, will the notebook be able to support it?
View 1 Replies View RelatedPowerPC :: G4 12" And 2gb IT's WORK?
Aug 10, 2009So I posted a thread about this a week or so ago. So me and my buddy Matt were discussing and he finally ordered the 2gb stick off Amazon. Let the pictures speak for themselves. Theres an odd thing where it displays 1gb at the bottom but 2gb at the top in system profiler. But activity monitor confirmed the 2gb does in fact work. EDIT: Added the activity monitor. Wala. 2gb in a PB12"
View 23 Replies View RelatedPowerPC :: Should/Will A PCI Card Work In PCI-X
Jul 25, 2010I asked this earlier but, never a decent answer and a few people asking if I have PCI-X and PCI-Express mixed up which made no sense for what was being asked.
I have a PCI USB2.0 card rev2.2 that I removed from my old G4 MDD.
I upgraded to a used G5 2ghz DP (M9032LL/A) system which has "three open full-length PCI-X slots: one 133MHz, 64-bit slot and two 100MHz, 64-bit slots" from what the specs on [URL] says.
I was told that a PCI rev2.x card will work in a PCI-X slot but when I tried the system didn't even power on.
So... should it work? does it matter which PCI-X slot? or was that guy confused between PCI-X and PCI-e?
Hoping it will work because 3 USB ports isn't enough when you have a WACOM, Scanner, Printer, Mouse, Keyboard, USB Drive, etc...
PowerPC :: CD-RW / DVD Drive Doesn't Work
Mar 20, 2006I'll put a CD in, the drive makes some noises, and then it just ejects. Is my drive screwed?
View 11 Replies View RelatedPowerPC :: Looking For N Wireless Cards To Work With G4
May 17, 2007I just finished upgrading my 1st gen macbook to an n card and have a N airport extreme router so the only thing that is going to drag down my network, especially disk access, is my Powerbook G4 1.67. I've searched the boards and found mention to cardbus cards for N, but all I can find online is G type cards. Are there N wireless cards that would work on my Powerbook? And are any of these 5 ghz?
View 3 Replies View RelatedPowerPC :: What Hard Drive Will Work In G4
Jan 11, 2008I have a 40gb drive and i want to get a bigger one? What will fit and work. Will this? [URL]
View 8 Replies View RelatedPowerPC :: Boot Up Disk Does Not Work With Mac
Jan 23, 2008Today I accidentally turned off my iMac by mistake (pressed off button twice while in sleep mode). And when I try to boot it when it comes to the little mac logo it says "this boot up disk does not work with this mac please restart I press restart and it says the same thing, also when it turned off with an os 9 in it and when I booted it I definatly did not press down c. I think it maybe the hd or is it possible to change boot priority?
View 16 Replies View RelatedPowerPC :: 3,e,d And C Keys Of My Powerbook Won't Work?
Jan 28, 2008Suddenly the 3,e,d and c keys of my Powerbook won't work. They were working fine earlier today, and I didn't drop the machine, spill anything on the keyboard. Any idea of what may be going on and how to fix it?
View 4 Replies View RelatedPowerPC :: Will PCI Fax Modem Work In Powermac G3?
Aug 1, 2008I have an old PowerMac G3, (Yosemite) and I thought about adding a 56k fax modem to it just for kicks. Question is: will a PCI fax modem work in the powermac g3? It's running Mac OS X and the modem is rather new.
View 1 Replies View RelatedPowerPC :: 3GB Of Ram In A G4 Quicksilver/work With Memory?
Aug 28, 2008I was hoping to install 3-1GB PC-133 168-Pin Non-ECC non-Reg SDRAM Memory in a Quicksilver G4. Would this memory work?
G4 Quicksilver 1.8 GHZ 2TB Sata Raid.
PowerPC :: G4 - Get Internet To Work Using Usb And Ethernet Only?
Sep 6, 2008so basically this powermac g4 quick silver 733mhz is giving me big problems connecting to the internet, its got built in ethernet and modem, also a ethernet card, and wireless usb dlink thing. so i install the driver for the dlink usb thing driver works etc, it says its connected but wont go to a page apple.ca (safari), so then i put the ethernet cord in the ethernet card lights flashing then goess to apple.ca so how can i just get the internet to work using usb only and ethernet only? im assuming the built in thernet isnt working on a case of that theres a card there i might just reinstall tiger off a imac g5 since i rember the internet setup was so much easier, wait nvm about the off a imac g5
View 2 Replies View RelatedPowerPC :: Will An AGP Card From A G5 Work In A Cube
Oct 28, 2008Just wanting to know for a friend if the stock 8x AGP card from my G5 Powermac would work in a G4 Cube? I didn't think it would but does anyone know for sure?
View 2 Replies View RelatedPowerPC :: Will Hardware Work With PowerMac G5?
Nov 16, 2008I wanted to upgrade the hardrives and change out the DVD drive for a bluray reader... Will these work? And if not what would?
View 2 Replies View RelatedPowerPC :: Ibook New Harddrive Cd-rom Don't Work?
Apr 24, 2009I have a white g3 ibook dual usb. I put in a bigger hard drive and can't install tiger which is a cd not dvd that boots fine in my imac. Cd drive will not eject with eject (f12) key or fn f12. I have to pull it open manually. I can reset the nvram by booting into firmware and typing reset all. I can't boot up to a screen with a refresh arrow and a right arrow that I can click on but nothing happens. All I get a start up is a folder with a blinkin face question mark.
View 3 Replies View RelatedPowerPC :: Can't Get Mouse To Work With My Emac?
May 27, 2009I got an eMac (short for educational Mac) from a friend. Anyway, I wanted to try to get some function out of it seeing as I'm a Linux guy and a windows guy, Apple is something new to play with.My mouse no longer works with the Mac and I don't know why and for the life of me with all my experience with Win. and Linux I can't fix it. I have two that I've tried, both of them were Microsoft mouses that had worked previously but then one day they stopped. I can move around with the keyboard but the mouse is a no go. Does anyone know what I might have done to screw up a perfectly functioning mouse? I know they are connected correctly because when I plug it into the USB port the laser light comes on, problem is the cursor in the screen doesn't move.
View 7 Replies View RelatedPowerPC :: PowerMac G5 Has 4 CPU Fans But Only Two Can Work?
Sep 17, 2009My CPU fans for proc.A are near-constantly capped at 300rpm(system minimum), no matter how damn fast the B-fans spin to compensate.I have: Kept it clean inside. Kept CPU settings on Highest, as usual, but tried Reduced/Auto Repaired permissions Reset the PRAM Reset the PMU Booted into single-user mode Reinstalled Leopard
Obtained & ran Service Diagnostic CD and passed all tests Re-calibrated the CPU's only to notice the speeds now hover around 400rpm now What more can I possibly try? I don't believe a re-seating of CPU's is in order. They work great. All my fans & temperature sensors passed their diagnostics tests, too.I am very irritated by the noise of 2/4 fans overcompensating and getting very loud, from 2000rm-4000rpm, and hey, my Mac is screwed up, and I really need to fix this.
