PowerPC :: SSD Raid 0 In Powerbook?

Jan 23, 2009

I was wondering if I could install 2 ssds and raid 0 on my 12'' powerbook/ 15'' MBP 2007 - taking out the superdrive and installing the MCE optibay I very rarely use the optical drive so I won't have much use for it. Regarding the powerbook, I'm having trouble finding a good IDE SSD so I'm looking at this transcend model

View 7 Replies


ADVERTISEMENT

PowerPC :: Internal RAID Card To Create RAID 1 Mirror Of System Drive For G5

May 16, 2007

I have a PowerMac G5 and need to purchase an internal RAID card to create a RAID 1 mirror of the system drive... one that will allow me create a Hardware RAID 1 mirror, not software RAID through OS X.

View 2 Replies View Related

PowerPC :: Powerbook Battery - Significance Of Levels For Powerbook G4 15''

Nov 15, 2006

I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?

View 8 Replies View Related

PowerPC :: 12 Inch Powerbook Not Starting Up / Using Install Disk From A 15 Inch Powerbook G4

Oct 15, 2008

My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?

View 3 Replies View Related

PowerPC :: Make RAID Setup In G4

Dec 20, 2010

I have a PowerMac G4 I'd like to use as an "experimental" backup machine. I am looking to try and make a RAID setup in it, and I'm no expert with that. I'm wondering if this is even possible, first. I'm also wondering if I can do this with 2 40 gb drives and a 20 gb drive. I want to make it so it appears as 1 drive. I'd be using tiger and a software RAID if that is of any relevance.

Specs:
500 MHz PowerPC G4
640 MB SDRAM
No hard drives currently

View 6 Replies View Related

PowerPC :: Raid 0 On G5 - Increase Performance?

Jan 30, 2007

I was thinking of installing a second 500BG hard drive in my powermac G5 and setting it up for raid 0. Will i notice any major increase in performance? (i'm planning on running Windows XP x64 on the system through Parallels Desktop)

specs:
dual 2.5GHz processor
2.5GB ram

View 7 Replies View Related

PowerPC :: Using G4 Quicksilver With SATA RAID And 6800?

Aug 21, 2008

My SATA RAID card is conflicting with my 6800 GT Graphics card in my 2002 Quicksilver.

View 7 Replies View Related

PowerPC :: Combine Disks With JBOD RAID On G3

Oct 27, 2008

I own a PowerMac G3 with 2 hard drive disks. One is a 20gb and the other is a 40gb. I would like to combine the disks with a pseudoRAID type called JBOD. JBOD stands for 'just a bunch of disks.' It's not really RAID. What I'm after is to see these two drives as one 60gb drive. Is that possible? I'm running Mac OS X Tiger.

View 9 Replies View Related

PowerPC :: RAID 0 On Dissimilar Hard Drives On G5?

May 2, 2010

I have read that it is "a shortcut to disaster" if I do a RAID0 (or any other RAID for that matter), if the Hard Drives are dissimilar. I have the original HD 149GB (now 5 years old), and have bought a new 1T HD, and was planning on setting them up as a striped RAID0. Is this a bad idea? Should I purchase a second 1T HD and do a RAID0 or RAID1 setup instead?

View 10 Replies View Related

PowerPC :: Boot G5 Dual 2 GHz Using Built In Software Raid 0?

Aug 31, 2007

Is it possible to boot a Powermac G5 Dual 2 GHz using the built in software Raid 0? I know that this can be set up using disk utility but wondered if it was possible to boot from the RAID set.

View 4 Replies View Related

PowerPC :: Setting Up A RAID On G4 / Don't Have Original Install Disc

Nov 20, 2008

I wonder if anyone can give me the basic steps to setting up a RAID array on a Powermac G4 (I think I mean a Raid 0 ie one extra hard drive).I have looked up a couple of articles but they advise to use the original install disc during the set up process. Unfortunately I don't have the original install disc. I have available one extra internal hard drive and one external hard drive.

I would like to set it up so that there are two internal hard drives with one replicating to the other one.

View 4 Replies View Related

PowerPC :: Can't Delete - Change Type And Update RAID In G5

Jan 29, 2009

I just bought a second hand powermac G5 with the hard drives 'RAIDED' The two 250GB drives are mirrored, but I want to make them concatenated so that I will have more space. I went into disk utility and I can't do anything, everything is greyed out. I can't delete RAID's, I can't change the type of RAID and I can't update the RAID. I've been sitting here for a while trying every possibility, but to no success.

View 2 Replies View Related

PowerPC :: What Step To Take Raid Two 300gb Drives And Move Everything Back

Nov 9, 2006

i am considering running a Raid 0 configuration on my Powermac 2x300gb drives. Right now i have duplicated everything onto a 250gb drive and have successfully booted with this drive. Does anybody know what steps i need to talk to Raid the two 300gb drives and move everything back onto them?

View 3 Replies View Related

Hardware :: Can A RAID 1 Guardian Maximus Rebuild Easily / Have Partitioned The RAID Set

Dec 2, 2009

I just bought a Guardian Maximus RAID1 kit and I have two 1TB drives in it. I'm using it over Airport Extreme as an airdisk (mac osx 10.6.2)

My question is simply: am I running a risk by partitioning it into two partitions? Should I ever have to rebuild the failed disk (which I understand is really simple with the Guardian Maximus) - will it have trouble doing two partitions? I'm using one 500gb partition for time machine and one 500gb partition as redundant itunes/media.

View 3 Replies View Related

Hardware :: Lacie RAID Shows Up As Two Separate HDs Instead Of A Single RAID HD?

Jan 28, 2009

I have a Lacie ext hard drive with 2 x 250gb HD that were one RAIDed into a single 500gb HD. I ran this update Lacie firmware update: http://www.lacie.com/support/drivers...r.htm?id=10053 And now my HD will only show up as two separate HDs of 250gb instead of a single RAID HD of 500gb.

View 6 Replies View Related

PowerPC :: New HD And RAM For Powerbook?

Nov 22, 2006

I have a Powerbook G4 1.5 w/ 1GB of RAM and the stock 80GB HD. I've run this puppy pretty hard for a couple of years now, and it's lately started to lag a bit - perfectly natural. I was considering buying a new notebook but I've decided to wait until after Leopard comes. So my question is:

1) How do I determine the max RAM I can put in this machine?
2) Are there are specific specs I need to be concerned with when swapping out the Hard Drive? Any type, size limitations, speed limitations, etc.

I'd love a little input as to how I find out this info. I think instead of taking the notebook plunge now, I'm going to put a nice new hard drive in this one and possibly bump up the RAM a little more if it will take it.

View 3 Replies View Related

PowerPC :: Is Powerbook G4 802.11g Or B

Mar 14, 2007

So is the is Powerbook G4 802.11g or b? it is the 1.25GHz model. Also, one thing I don't understand regarding the airport extreme or any airport for that matter: isn't the maximum speed going to be completely determined by how much the cable provider, Comcast, pumps out?

If this is the case, how do I determine what my transfers and speeds are looking like specifically for Comcast? And, how would an airport extreme improve upon this or any other performance aspect in this regard?

View 6 Replies View Related

PowerPC :: Old Powerbook G4 Needs More RAM

Jul 18, 2007

Powerbook G4 (Ti-book) 667 mhz, 512 mb RAM. I finally after YEARS upgraded my OS (10.4.10), yay me! Just bought Adobe CS3 (for the new IMAC we have yet to buy), but I would like to install it on my Powerbook. SO, it it time to bump up to 1GB RAM. I was told it was tricky, and I should take it in to the apple store to install, but then I took a look under the keyboard, and it looks pretty simple. i have installed new RAM on a G5 tower, and this looks way easier. So, I am planning on buying the RAM either online or at FRY's, then installing it. BUT, I know I have to be careful of what type of RAM to buy. I found what I think will be good at [URL] but I will have to buy 2 (512's) as mine currently has 2 (256). I guess I just want to make sure I am not going about this the wrong way before I drop about $200 for RAM upgrade...

View 3 Replies View Related

PowerPC :: Right RAM For Powerbook G4?

Sep 27, 2007

I have a 15' Powerbook G4 1.67, currently with 512 of ram....so i'm shopping for an upgrade, but not sure which specific type to go with. In my system profile it says i'm running..

Type: DDR SDRAM
Speed: PC2700U-25330

And these are the types i've been seeing to choose from.

G4 15-inch 1.67GHz (DDR M9676LL/A) Memory
G4 15-inch 1.67GHz (DDR M9677LL/A) Memory
G4 15-inch 1.67GHz Double Layer DDR2 (M9969LL/A) Memory

View 1 Replies View Related

PowerPC :: Using PowerBook And Ram?

Sep 3, 2008

I just bought a used 12" powerbook G4 1.5ghz and I want to add some ram to max it at 1.25Gb. Did anyone try to use ddr400 instead of ddr333 on powerbooks? In theory it will run at 333 like in any pc, but is this flawless in powerbooks? Because ddr333 is expensive nowadays.

View 3 Replies View Related

PowerPC :: How Much Could Get For Used Powerbook?

Sep 6, 2008

I know the powerbook is rather archaic now, but I'm trying to get a new Macbook and don't want to throw my old powerbook away. So.. I have a friend who wants to buy my old G4 Powerbook with 60GB capacity, 512 MB memory, 1.33 GHz cpu speed. It's extremely worn in, meaning, it won't last more than 20 minutes off the power cord, but someone could always replace that. So what would be a fair price to charge someone to take it off my hands?

View 1 Replies View Related

PowerPC :: Ram Of Powerbook G4

Jul 22, 2009

I bought a powerbook G4. The ram is 512 mb but i want to upgrade that. Is it possible to place two 1gb cards in each slot. That i have a total of 2gb ram? Me was told that the max of the powerbook G4 is 1 gb. Is that true? And when it is true, is it smart to buy a total of 1gb for the powerbook g4? Or doesn't make that any difference?

View 6 Replies View Related

PowerPC :: What HDD To Buy For Powerbook G4?

Aug 9, 2009

I believe the hdd is dead so I need to find a replacement but I've no idea which cause there are 93487534231 kinds. Only thing I can really find via googling is that it has to be a 2.5" ATA but there are several different kinds of ATA hdds... so confusing. I was thinking this? [URL]

View 7 Replies View Related

Mac Pro :: Get A Highpoint Raid Controller And Put Those 4 Drives In A Raid 5 Array?

May 1, 2008

I have a macpro with 4 x 1tb drives

Is it possible to get a highpoint raid controller and put those 4 drives in a raid 5 array (and then create partitions inside that array) - or do you need to have 1 drive by itself for the operating system, and then create a raid array using the remaining 3 drives?

Lastly, are the highpoint 3500 series a decent card? and fully compatible?

View 3 Replies View Related

Mac Pro :: RAID 5 Volumes - Create In RAID And Disk Utility?

May 20, 2009

I have a new Mac Pro Quad 2.93 with the Mac RAID card installed with four 1TB drives setup in a RAID 5 array. When creating the volumes in the RAID utility, you can not edit them, resize, etc. If one large volume is created in the RAID utility, you can then partition that one volume using the Apple Disk Utility, which then allows you to resize if needed.

View 1 Replies View Related

Mac Pro :: Move To A RAID Card / Will I Need To Recreate My Entire RAID?

Sep 13, 2009

I'm using the software RAID right now. Everything is set as RAID 10. I want to move to a RAID card� if I keep it as RAID 10 will I still need to redo everything?

View 1 Replies View Related

PowerPC :: Powerbook G4 RAM Beeps

Aug 26, 2010

Just replaced the logicboard on a 01' Powerbook G4 Titanium Onyx and I'm getting the no video/beeping sound after the chimes upon power up.

3 beeps
3 lights (1 long + 3 quick flashes)

I don't THINK it's the RAM though, I thought these cards were good before the computer fried. I've swapped the two 256MB cards with each other, also plugged just one RAM card in both slots one at a time--still no turn on and I get the 3 beeps. Unfortunately I don't have any extra 144-pin 133 Mhz SDRAM chips laying around or i'd just test them. It seems unlikely that both RAM cards would be broken, in addition to the logicboard frying, unless the two events happened simultaneously. Previous install had the 667 Mhz upgraded processor and when I took the logic board out it was fried on the bottom with lots of corrosion/leakage on a good 5% of the surface area. Anyways, I replaced it with a 550 Mhz board. Could the beeping be from installing the different processor or is it more likely that I simultaneously fried both RAM chips plus the motherboard?

View 1 Replies View Related

PowerPC :: Upgrading Ram In PowerBook G4?

Nov 27, 2010

Do you guys think it would be worth it to spend the $50 to upgrade from 1.5GB ram to 2 GB ram in this machine with Tiger on it?

View 7 Replies View Related

PowerPC :: Macbook Or Powerbook - Which Is Best

Jul 31, 2006

I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!

But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?

View 6 Replies View Related

PowerPC :: New PowerBook G4 RAM Not Being Recognized?

Sep 7, 2006

This is ridiculous. After I went out and got a new screwdriver to install my 1GB stick of RAM, which I got off of Newegg, it is now not recognized by my computer. So now I'm running with 256MBs of RAM. Beautiful, thank you Apple.

[URL]
This is what I ordered...Crucial Technology 1GB 200-Pin DDR SO-DIMM DDR 333 (PC 2700) Notebook Memory - OEM

I thoroughly made sure this was the right RAM, and even people with my same type of computer have said it works on their posting thing.. 1.5 GHz PowerBook G4 15". Anyone know how I can get this to work?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved