PowerPC :: PowerBook G4 - Turn The Fans Off?
Sep 30, 2006
I'm trying to record something through the internal mic (and I'm too cheap to go out and buy a proper mic) and I was wondering if there is anyway through Terminal,or an external program, to force the fans to shut off for a certain period of time? I don't want to turn them off to find they can't turn back on and suddenly the computer is 1000�...I just want to keep them off to have a minimal amount of background noise. (And, yes, I'll be running it in a moderate climate so the computer doesn't overheat).
View 7 Replies
ADVERTISEMENT
Oct 18, 2007
My fans are constantly going on my g4 powerbook and the noise drives me nuts. I do all sorts of work - graphics (CS2), music recording, multimedia... but even when I am just not doing anything intensive the fans are on.
The fans are at full speed now and the temp reads 37C / 98F. I've used an icurve since I got the machine.I've put up with this noisy sound for a couple years now. One person said I need to clean the air vents, like dust is causing the noise. Does anyone know about this?
its a g4 titanium powerbook 867 mhz 768 RAM (ancient I know but it still works!)
View 1 Replies
View Related
Sep 7, 2007
I've upgraded my HD two days ago. Today my PB suddenly turned off and won't turn back on. All the connectors are in the right places and nothing looks wrong inside. I have no idea what's happened.
View 3 Replies
View Related
Aug 1, 2009
It just started getting really hot quickly for about a week before it didn't turn on. I would have it tilted so that its not flat, hoping that it would give it more air but it didn't do anything. I don't even need to do much to get it really hot. And I shut it off every night, so it should get to reset itself. I haven't done anything different that I haven't before. Any fixes please!? Also what's really weird is that it gets hotter and hotter even when it is off and not even plugged in.
View 4 Replies
View Related
Oct 14, 2009
I have a PowerBook G4 1.67 that shut itself down sometime during the day yesterday, and will not power back up. It's completely unresponsive to the power button, with no signs of life whatsoever.
I've tried resetting the PMU. There has been no new hardware or software installed. This has been tried with 2 batteries, and 2 AC power supplies.
There is inconsistency with the color of the AC power supply tip, as it doesn't seem to indicate the strength of the battery. Regardless of which battery or how much charge is left, the tip is Green, and will flicker Yellow very quickly once, when plugged in. It was Green following the initial shutdown, Yellow when I placed a dead battery in it, and then eventually turned Green. Now, it seems permanently in the Green / flicker Yellow state.
It did fully charge one battery while like this.
View 3 Replies
View Related
Nov 26, 2008
Does anyone know if there's anyway to turn on an aluminum powerbook without the power button? I mean is there any keystroke combination that can turn a powerbook on?
View 5 Replies
View Related
Oct 16, 2009
I recently purchased a Powerbook G4 1.5Gz 12" but it will not turn on unless it is plugged in. once turned on, i can unplug it and it runs on its battery just fine though?? it also can't seem to remember the date and my internet connection each time i turn it on.
View 2 Replies
View Related
Jun 26, 2008
Got a 4 year old 15" PowerBook with a small history of battery issues. Its on its 3rd battery that is on its last leg. It can't be unplugged for more than 5 seconds or it shuts off...been this way for months. Well today it shut off and won't turn back on. Do I buy yet another battery or is my pb dead?
View 8 Replies
View Related
Aug 12, 2009
I bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
View 2 Replies
View Related
Mar 8, 2007
I just aquired a PowerBook G4 (500Mhz) and it is dead. It will not turn on no matter what I try and when I plug in the power adaptor it glows a bright orange (almost red)...what does that mean?
View 15 Replies
View Related
May 22, 2007
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies
View Related
Nov 11, 2009
I have a late 2009 Macbook Unibody that get extremely hot. From using SMCFanControl it tells me it's at 80-90 degrees celcius which to me is extremely hot. The fans also do not kick in at all when it gets at this level. When using skype, it skyrockets over 100 degrees celcius which causes my computer to slow down.
Is anyone else having this issue? Do you think it's a hardware malfunction?
View 15 Replies
View Related
Jun 12, 2012
How do I turn on the fans on my iMac to keep it from overheating? I used to be able to turn them on when I plugged in the computer and turned the computer on simultaneously but that stopped working.
Info:
iMac (20-inch Late 2006), Mac OS X (10.6.4)
View 1 Replies
View Related
Nov 15, 2006
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies
View Related
Jan 25, 2007
My parents recently bought an iMac. Yesterday my mom was playing a game when the computer froze. Neither force quit or holding the power button was doing anything so in her frustration she unplugged the system. Today, after plugging in the system again, it won't turn on.
I press the power button on the side of the wireless keyboard and the green light on the keyboard turns on for about 3 sec and then starts flashing. No fans start up and the screen does nothing.
Information:
iMac and Macbook Pro
Mac OS X (10.6.3)
View 14 Replies
View Related
Jul 15, 2010
I got a powerbook G4 for free and the power button is missing, just wondering is there any way to power it on without the power button? i just wanna see if it works to see if it is worth getting a new topcase
View 2 Replies
View Related
Mar 6, 2008
I'm having a MAJOR difficulty with my Powerbook G4 17" (1.67GHz) after replacing the Hard Disk...
I replaced the hard disk with a new 250GB one, and after putting everything back in place I put the OSX install CD in the harddrive and tried to turn the computer on...it wouldn't turn on so I left it for about 10 minutes. When I came back I tried again and it worked this time, and booted into the Open Firmware... then it suddenly turned off again. Then, about 2 minutes later again, it turned on again, and it went into the OSX installer. I partitioned the hard drive and was about to start the installation process, but before I could press the install button the computer turned off again. Now it has been like this for over 2 hours and refuses to turn on at all. I have tried resetting the PRAM but it makes no difference. I've tried taking out the battery and all sorts of things but nothing works. I'm at my wits end now
View 2 Replies
View Related
Jan 4, 2009
Had (used) iBook G4 several months now & thoroughly enjoy it, even tho' I live in the sticks where there's no hi-speed/wireless available; I connect to internet & power, which is fine.
This weekend I went to turn off my iBook & it wouldn't turn off. It's now permanently on, with opening info barely visible (like I need to click on F2 to brighten up, except nothing happens).
Currently using my "back up" computer, my iMac Grape, which is pretty much an antique by now.
View 1 Replies
View Related
Mar 7, 2008
I just upgraded from a Powermac G3 (1st rev.) to a Powermac G4 DP 1.25 ghz... so much faster! Any other fans here? Any cool stories to tell about it?
View 17 Replies
View Related
Oct 15, 2008
My 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies
View Related
Jan 4, 2011
My PowerMac G5 fans hardly ever speed up. I mean they certainly never go full speed or ever close how they sometimes behave on start up. I never get the jet speed noise. Even when I am rendering a movie in FCP, I hardly hear the fans. Right now on idle, iStat pro reports CPU A being 58C and CPU B being 56C. Yet, the fans are still only 400RPM both CPUS Intake/Outake.
View 4 Replies
View Related
Oct 26, 2006
I have a strange problem with the powermac G5 1.8 SP, yes the one with the hardware bug. It was my first mac, what a dissapointment. The bug was partly solved with the firmware upgrade, but after that it still behaved strangely. The fans suddenly go up to maximum speed every hour, then quikcly return to normal. There still have been lockup's / beachballing with USB, and overall slow performance.Now I am running the latest mac osx Tiger version, about a few weeks ago, the fans start revving up almost to maximum, all the time, regardless of cpu load. The cpu temperature reads about 60...65 degrees centigrade when idling (minimum cpu load), cpu setting is already on "reduced speed". After switching-on, cpu temperature is already 60 degrees centigrade. The cpu heatsink is stonecold, as is the exhaust airflow. The cpu 2 fans roar like mad and keep revving up and down. When I remove the plastic transparent cover, the photocell is activated and a red LED comes on, now the fans immediately return to normal speed. Anybody else had similar problems wit the powermac G5 SP 1.8Ghz ?
View 12 Replies
View Related
Apr 24, 2007
I have this Power Mac G5 and every now and then it'll freeze up, the fans will go full blast, and the screen will go black. It's not even when I put a heavy load on it.I usually just hold the power button down and do a hard shut down. Does anyone know why this G5 keeps doing this? Should I re-seat the ram and GPU?
View 4 Replies
View Related
Jan 19, 2009
My PowerMac's (G5 Dual 1.8GHz procs) fans seem to run at a solid 4k rpm's regardless of what I'm doing, even with CPU usage set to low. I've taken the whole machine apart, cleaning it with canned air and such, but the problem just won't leave me be. The air coming out of the machine is ice cold, and the temperature readings I'm getting are about 86 degrees F for the CPU's and 70 for the HDD, so I'm not sure what gives.. Slot and Backside fans are running at 255 rpm, but the others are all 4k.
View 8 Replies
View Related
Apr 26, 2009
I just picked up a G4 MDD off ebay. Everything seems to be working fine, and it passed tech tools tests for whatever that is worth. The only thing I noticed is that for about 2 or 3 seconds during boot the fans seem to rev up pretty high, then settle back to normal. Does anyone else with this computer have this issue or has anyone heard of it?
View 3 Replies
View Related
May 25, 2009
I opened up my G5, to install more RAM, and saw that one of the hard drives was unplugged (I just got it used), and so I connected that, blew some compressed air into it, installed the RAM and closed 'er up. Then I tried to power on and it didn't work (No Chimes, just fans spinning, no video, not even the start up chime). So, I disconnected the hard drive, took out the RAM I put in, and closed it, and it still doesn't boot. Same thing. My keyboard is wireless, but the wireless dongle thing doesn't get any power when it is "powered on". The fans are spinning all the time. (Except when it's powered off, obviously)
View 23 Replies
View Related
Jul 28, 2009
The fans on my G5 Pro are running at close to 3000rpm most of the time. I have read other forums and do not think this is normal at all. I started looking into the fans because I am getting frequent kernel panics (black screen crashes) and thought it might be the machine over heating. My CPUs are at about 50C to 52C and the fans are constantly running that fast.
View 5 Replies
View Related
Sep 17, 2009
My CPU fans for proc.A are near-constantly capped at 300rpm(system minimum), no matter how damn fast the B-fans spin to compensate.I have: Kept it clean inside. Kept CPU settings on Highest, as usual, but tried Reduced/Auto Repaired permissions Reset the PRAM Reset the PMU Booted into single-user mode Reinstalled Leopard
Obtained & ran Service Diagnostic CD and passed all tests Re-calibrated the CPU's only to notice the speeds now hover around 400rpm now What more can I possibly try? I don't believe a re-seating of CPU's is in order. They work great. All my fans & temperature sensors passed their diagnostics tests, too.I am very irritated by the noise of 2/4 fans overcompensating and getting very loud, from 2000rm-4000rpm, and hey, my Mac is screwed up, and I really need to fix this.
View 17 Replies
View Related
Sep 3, 2010
My step-son works for a company that uses a variety of computers in their test dept. and when they upgraded the test equipment they gave the old stuff to employees.My step-son is a dyed-in-the-wool PC guy who doesn't care for Macs so when he saw a G5 PPC sitting there he took it home and gave it to me.
It's a 2.0 GHz dual-processor with 8x AGP video. I checked it out and the only thing "wrong" with it is that someone has set up the fans, all of them, to run full-speed all the time.First, how did they most likely do that and, second, how can I return the fans to their normal operation. This can't be good for the computer and it's so loud and annoying that I'd rather use my G4.It's a great computer otherwise, I hope they didn't do something permanent that would require a new motherboard, that's not in my budget.
View 5 Replies
View Related
Sep 1, 2006
My iBook just fell of the table, and now refuses to power up. Never again will i say the magSafe is pointless. I (was) running a 800mhz, 640mb G3 iBook, 10.3.9, bought in 2003. The laptop landed on a connected usb cord, which has damaged the usb socket, with the white plastic bit inside the port now broken off, leaving exposed connectors. The laptop did power up initially after the fall, but upon connecting another usb into the remaining usb port,the iBook's fans came on, louder and faster than ive ever heard, before dieing. I simply cannot afford a MacBook right now, and had just upgraded the RAM and OS (10.2.8 - 10.3.9) so that it would last me another year.
View 11 Replies
View Related
