PowerPC :: G5 Not Booting - Fans Are Spinning
May 25, 2009
I opened up my G5, to install more RAM, and saw that one of the hard drives was unplugged (I just got it used), and so I connected that, blew some compressed air into it, installed the RAM and closed 'er up. Then I tried to power on and it didn't work (No Chimes, just fans spinning, no video, not even the start up chime). So, I disconnected the hard drive, took out the RAM I put in, and closed it, and it still doesn't boot. Same thing. My keyboard is wireless, but the wireless dongle thing doesn't get any power when it is "powered on". The fans are spinning all the time. (Except when it's powered off, obviously)
View 23 Replies
ADVERTISEMENT
Aug 21, 2008
I'm running a Dual 1.8 GhZ PowerPC G5, with 1.5 gig of RAM. I recently replaced the power supply, as the one that came with the machine died. I left the machine running last night, and this morning I found the fans ramped up as high as they could go, and the screen telling me that one of the external devices had been disconnected improperly. (This had happened once or twice while I was using the computer before I went to bed. Couldn't figure out what the problem was.) I shut down the machine by holding down the power button. When I turned it back on again, it wouldn't boot. I get the startup chime, and the main HD spins up, but the screen remains blank (the light on the display still works the way it should).
I was somehow able to get the machine to start from my backup drive once, so I verified and repaired the main drive. It checked out fine. I tried another restart, and the machine wouldn't boot again. It has since refused to boot, getting no farther than the startup chime. I've tried pressing the power management button. I've tried booting from the Leopard disks, and I've tried zapping the PRAM. However, it appears that the keyboard isn't having any effect, as the last two didn't work either. I've removed and reseated one of the RAM cards, but haven't had a chance to try the rest yet.
View 6 Replies
View Related
Oct 2, 2006
I have a 1.8Ghz dual processor G5, 1GB Ram, 80GB HDD, with OS X 10.4.7 installed and all current updates, and today I was working on it and the fans on it slowly started speeding up, and then everything on the screen disappeared and a mesage appeared stating that a restart was required. After restarting everything seems to be working fine, but I'd like to know if this is a fluke or if I have a serious problem.
View 12 Replies
View Related
Aug 10, 2008
i have an ibook g4, and was using it just fine the other night, then when i came back to it a few minutes later it had shut off completely. now when i boot up, the computer freezes at the spinning gear startup screen or at the blank blue screen immediately after the spinning gear. it will boot in single user mode, but it won't boot up with my os x install disc. does anyone know any unix i could try to use to get my mac up and running again, or has anyone had this same problem and knows a fix for it?
View 8 Replies
View Related
Jul 12, 2009
Ok, so I got a Mac Pro I believe it's a 2007 model or some where along those lines, it's 2.63 ghz quad core.None the less here is what happened.Came home one day to find my USB not working at all it would charge but not connect to the computer.
So I reboot still not working. I turn it off and take a look inside nothing, reseat the ram just to be sure. Ok, turn it on, nothing happens, no screen I hear the fans spinning and the hd spinning.So I take out each card and try one by one to see if any one them are causing a problem nope.As a side note the computer light comes on, but if I like the power button it just shuts right off. Also the computer power up when I put the plug in the back without pressing the on button.
today i took the computer apart to see if I could find any blown caps... hmm nope. Went to the local computer store but they don't test for anything mac so he said I could try out their power tester nothing would light up on the tester but it may have been wrong pins. CD drive showed all voltages but 3.3v.Now im not sure if it's the MOBO or the Power supply is there any way to test this out? or if I toast something else? I have no clue.
View 3 Replies
View Related
Jul 1, 2009
Just been having some pretty big issues with my late 2007 Macbook Pro.Basically, the other day I was playing World of Warcraft, when my Macbook ran out of juice. I plugged in the charger, left it for a few minutes, but no, it wasn't going to wake up again.
So I turned it off, and that was basically it. It wouldn't turn on again, regardless of whether or not the charger was plugged in. Eventually I got it to boot by doing an SMC reset, but now the fans run at 6000RPM and it says it's at 0C and the fans are running at 0RPM.Which is making me believe that the temp sensor is screwed.
Also, it no longer detects my battery, and Windows simply doesn't boot. Mac OS does, but again, I get these issues. System profiler says that my battery has 0 capacity, 0 charge cycles, it is not charging, and it's essentially dead. However, if I unplug the charger, the Macbook continues to stay on, though I can't say how long this is for.
I'd also like to make it clear that the fans start running at this speed from the second it starts up, right before the grey screen appears.I've tried PRAM and SMC resets multiple times with no luck, and I'm wondering if the logic board is just partially fried or something.Hopefully you guys can help me, and no, it's not under warranty, though I do have home insurance which has covered this Macbook before after it got sat on and the screen was crushed.
View 1 Replies
View Related
Jul 31, 2009
For the last couple of days my fans have been going crazy, spinning at 6200RPM non stop. I installed fan control last month but the issues just started. When I open up fan control it says my fan should be spinning at 4000RPM. I had smcFanControl installed before and its still installed. My bluetooth module over heated yesterday so I used SMC to rev up the fans. I don't know if that is the issue because it isn't running now. I'll try uninstalling that now.
View 2 Replies
View Related
Nov 20, 2010
I have a 2007 Intel 24" iMac (Last of the white plastic editions) and I've recently had troubles with the 7600GT Graphics card. The computer would get strange artifacts all over the screen, before crashing. Unfortunately, it is out of Applecare, so I took it into a shop and had the card replaced. Upon receiving it back, they told me that they replaced the graphics card, but still found problems with it booting up inconsistently. After some testing, they realised it was the Hard Drive controller at fault, and put my harddrive in an external USB enclosure and booted it off that instead. This was an easier solution than replacing the entire logic board, they told me. (and they gave me the enclosure for free).
Now I've brought it home, and set it all up, only to find that the HDD fans are constantly spinning at 5600 RPM, which is deafeningly loud, even so over my room fan. I presume this is because there is no longer any hard drive controller/hard drive in there. I've installed SMC Fan Control, but to my dismay you can only set the minimum fan speed, and not the max. If possible, i'd like to set the max fan speed at a much lower rate, without needing to open up the iMac. So my questions are:
Is there a way I can set the max fanspeed for the HDD, or disable it since there isn't one in there anyway? And is there a better solution for booting my iMac OS onto an external HDD? (i.e. Should I look into buying a firewire 800 drive enclosure instead of this USB 2.0 one?)
View 6 Replies
View Related
Feb 16, 2012
Exactly the same issue on Macbook Air and new iMac both running Safari 5.1 and Lion 10.7.3
When I open Safari it does not open a page, it just shows a spinning beach ball and shortly after the fans kick in and the activity monitor shows 1 webprocess at 99 - 100% or sometimes 2 web processes at 50/50% all coming from the User. When I inspect the process it says it's "Parent Process (Safari 450)"
When I quit safari the web processes stay at 100% and will only stop when I quit them in activity monitor. I have reset Safari but no joy. Firefox etc works fine. The only update I ran was a 1Password update but they say it's not them.
View 1 Replies
View Related
Feb 4, 2009
My parents have an older 20-inch white Intel iMac that has run great through the years. But about a week ago it just started spinning the CPU fans up to 3500-4000 RPMs and it won't bring them back down. Istat shows that the CPU temp is around 90 degrees and the computer remains cool to the touch.
So it isn't overheating. My parents keep it off most of the time because they don't want to ruin it, but they're planning on using it in their business they're trying to start up. We've done some web searches and nothing seems to fix it.
View 7 Replies
View Related
Sep 8, 2009
I'm currently using Win 7 on my partitioned drive since I can't get OS X to boot. Here's what I did to screw everything up: Installed SL awhile back without performing what people here are referring to as a "clean install" (I had lots of third party apps installed). Things seemed to be working fine, though Finder seemed to lag more in 10.6 than it did in 10.5. Today, however, I tried updating Parallels 4.0. It required that I reboot in order to finish the installation.
But, when the Apple logo appeared, that damned spinner just wouldn't stop. [Perhaps Parallels is "tainting" the kernel?] First, I tried reinstalling from the SL Install DVD. No luck there. I tried downgrading to 10.5 (archive and install). Still didn't boot. I even tried several volume repairs. Those didn't help either. So, now I've heard that some users are having luck booting in safe mode. But, if I try that, will I be able to transfer data to a backup drive?
View 6 Replies
View Related
May 20, 2010
I put in a samsung 500gb drive, and since yesterday this one is also doing strange. I was browsing the internet and it started launching itunes and going really slow although i wasn't doing anything, then it showed a force quit window telling me there was not enough memory on the startup disk for applications, althoug i still have roughly 340gb of free space. I just thought of restarting it maybe that solved the problem. But no, since then it doesn't startup in mac os x, bootcamp works fine with windows 7 installed. But starting snow leopard just gives me a grey screen like the safe boot screen with the progress bar and the spinning wheel. the progress bar dissapears after a while and the wheel etternaly spins.
Tried single user mode and fsck -fy but it only gives me some dislocations, it gets till the repairing Tree and then says that the volume Macintosh HD could not be repaired. Also tried to reset Pram but that neither. starting up with a bootable usb with the mac os x install dvd on it gives me the prohibitory sign after 2 minutes. I still have to try with my original disc, but that one is at home and I'm not gonna be there till next month.
View 6 Replies
View Related
Mar 18, 2010
My imac has just all of a sudden stopped working out of the blue. It was working fine yesterday and then just froze with the spinning wheel of death.
After a long long time it still was frozen so i held power button for 4 secs to power down.
PS: i am running snow leopard up to date on both macs.
I tried to power up and it has random start up issues.
1) It sometimes has the flashing folder with question mark and grey/white screen
2) It sometimes has the plain blue screen
3) It once out of the last 30 attempts to boot goes to the desktop and i noticed my wallpaper had been reset to default mac one. - Every move i made had the spinning wheel and i did not get past loading
Firefox and it froze again.
I have tried resetting the PRAM from boot disk but did not help. I ran Disk Utility from boot disk and repaired permissions and disk. No change in imac..
I have also tried pulling out one o the 4gig rams and booting and still the same problem so im guessing the ram is ok??
I have tried connecting imac to my macbook pro via 6 pin firewire cable and booing the imac into Target mode but the imac never appears on the macbook pro desktop to access files. The cd-rom appears showing the disk in the imac and i could eject it from the macbook pro. So looks like the target mode boot works, kind of..
I am running out of options and found out today my imac is not under warranty anymore.. !!!!! $%#%$#%
Any chance i have a virus of some sort?
View 5 Replies
View Related
Aug 7, 2009
My father owns one of the original G5s, so its power pc not intel. Today while browsing an excel spreadsheet he says part of the screen turned black, then the monitor shut off, then the monitor came back on but not video. Mean while the fans started spinning out of control. Now when he tries to turn it on, he gets power, but all that happens is the fans spinning faster and faster and faster until he turns it off. No video or anything. Just speeding fans. He fears the CPUs died since they control the fans. Any suggestions? He also says the fans were spinning unusually fast these last few days.
View 4 Replies
View Related
Mar 7, 2008
I just upgraded from a Powermac G3 (1st rev.) to a Powermac G4 DP 1.25 ghz... so much faster! Any other fans here? Any cool stories to tell about it?
View 17 Replies
View Related
Jan 4, 2011
My PowerMac G5 fans hardly ever speed up. I mean they certainly never go full speed or ever close how they sometimes behave on start up. I never get the jet speed noise. Even when I am rendering a movie in FCP, I hardly hear the fans. Right now on idle, iStat pro reports CPU A being 58C and CPU B being 56C. Yet, the fans are still only 400RPM both CPUS Intake/Outake.
View 4 Replies
View Related
Sep 30, 2006
I'm trying to record something through the internal mic (and I'm too cheap to go out and buy a proper mic) and I was wondering if there is anyway through Terminal,or an external program, to force the fans to shut off for a certain period of time? I don't want to turn them off to find they can't turn back on and suddenly the computer is 1000�...I just want to keep them off to have a minimal amount of background noise. (And, yes, I'll be running it in a moderate climate so the computer doesn't overheat).
View 7 Replies
View Related
Oct 26, 2006
I have a strange problem with the powermac G5 1.8 SP, yes the one with the hardware bug. It was my first mac, what a dissapointment. The bug was partly solved with the firmware upgrade, but after that it still behaved strangely. The fans suddenly go up to maximum speed every hour, then quikcly return to normal. There still have been lockup's / beachballing with USB, and overall slow performance.Now I am running the latest mac osx Tiger version, about a few weeks ago, the fans start revving up almost to maximum, all the time, regardless of cpu load. The cpu temperature reads about 60...65 degrees centigrade when idling (minimum cpu load), cpu setting is already on "reduced speed". After switching-on, cpu temperature is already 60 degrees centigrade. The cpu heatsink is stonecold, as is the exhaust airflow. The cpu 2 fans roar like mad and keep revving up and down. When I remove the plastic transparent cover, the photocell is activated and a red LED comes on, now the fans immediately return to normal speed. Anybody else had similar problems wit the powermac G5 SP 1.8Ghz ?
View 12 Replies
View Related
Apr 24, 2007
I have this Power Mac G5 and every now and then it'll freeze up, the fans will go full blast, and the screen will go black. It's not even when I put a heavy load on it.I usually just hold the power button down and do a hard shut down. Does anyone know why this G5 keeps doing this? Should I re-seat the ram and GPU?
View 4 Replies
View Related
Jan 19, 2009
My PowerMac's (G5 Dual 1.8GHz procs) fans seem to run at a solid 4k rpm's regardless of what I'm doing, even with CPU usage set to low. I've taken the whole machine apart, cleaning it with canned air and such, but the problem just won't leave me be. The air coming out of the machine is ice cold, and the temperature readings I'm getting are about 86 degrees F for the CPU's and 70 for the HDD, so I'm not sure what gives.. Slot and Backside fans are running at 255 rpm, but the others are all 4k.
View 8 Replies
View Related
Apr 26, 2009
I just picked up a G4 MDD off ebay. Everything seems to be working fine, and it passed tech tools tests for whatever that is worth. The only thing I noticed is that for about 2 or 3 seconds during boot the fans seem to rev up pretty high, then settle back to normal. Does anyone else with this computer have this issue or has anyone heard of it?
View 3 Replies
View Related
Jul 28, 2009
The fans on my G5 Pro are running at close to 3000rpm most of the time. I have read other forums and do not think this is normal at all. I started looking into the fans because I am getting frequent kernel panics (black screen crashes) and thought it might be the machine over heating. My CPUs are at about 50C to 52C and the fans are constantly running that fast.
View 5 Replies
View Related
Sep 17, 2009
My CPU fans for proc.A are near-constantly capped at 300rpm(system minimum), no matter how damn fast the B-fans spin to compensate.I have: Kept it clean inside. Kept CPU settings on Highest, as usual, but tried Reduced/Auto Repaired permissions Reset the PRAM Reset the PMU Booted into single-user mode Reinstalled Leopard
Obtained & ran Service Diagnostic CD and passed all tests Re-calibrated the CPU's only to notice the speeds now hover around 400rpm now What more can I possibly try? I don't believe a re-seating of CPU's is in order. They work great. All my fans & temperature sensors passed their diagnostics tests, too.I am very irritated by the noise of 2/4 fans overcompensating and getting very loud, from 2000rm-4000rpm, and hey, my Mac is screwed up, and I really need to fix this.
View 17 Replies
View Related
Sep 3, 2010
My step-son works for a company that uses a variety of computers in their test dept. and when they upgraded the test equipment they gave the old stuff to employees.My step-son is a dyed-in-the-wool PC guy who doesn't care for Macs so when he saw a G5 PPC sitting there he took it home and gave it to me.
It's a 2.0 GHz dual-processor with 8x AGP video. I checked it out and the only thing "wrong" with it is that someone has set up the fans, all of them, to run full-speed all the time.First, how did they most likely do that and, second, how can I return the fans to their normal operation. This can't be good for the computer and it's so loud and annoying that I'd rather use my G4.It's a great computer otherwise, I hope they didn't do something permanent that would require a new motherboard, that's not in my budget.
View 5 Replies
View Related
Sep 1, 2006
My iBook just fell of the table, and now refuses to power up. Never again will i say the magSafe is pointless. I (was) running a 800mhz, 640mb G3 iBook, 10.3.9, bought in 2003. The laptop landed on a connected usb cord, which has damaged the usb socket, with the white plastic bit inside the port now broken off, leaving exposed connectors. The laptop did power up initially after the fall, but upon connecting another usb into the remaining usb port,the iBook's fans came on, louder and faster than ive ever heard, before dieing. I simply cannot afford a MacBook right now, and had just upgraded the RAM and OS (10.2.8 - 10.3.9) so that it would last me another year.
View 11 Replies
View Related
Jul 3, 2007
CPU cooling fans are running at strange different speeds. Powermac G5 early 2005, dual G5 (not dual core).This is at idle:CPU A 60 degree Intake 300rpm Exhaust 300rpmCPU B 63 degrees Intake 1125rpm Exhaust 1100rpm! I have not noticed this before. They usually remain identical.
View 4 Replies
View Related
Mar 13, 2008
I have posted a question on the Apple site, I would like to get some input from the people here as well.I wont bother typing out the whole thing, much simpler to let you go have a quick read at the questions and solutions I have tried.
View 2 Replies
View Related
Dec 3, 2008
I've cleaned all my components except the HDD bay fans on my G5 Powermac. I've searched google about 5 pages deep and no luck. I have the service manual but it doesn't show how to remove those fans either. Anyone know of a link that shows how to remove them? I'm very good at taking stuff apart but I just can't seem to take this fan assembly apart. Maybe it's my kryptonite?
View 1 Replies
View Related
Jul 8, 2007
What is wrong with this picture? The fans are running out of control constantly. This machine is sooo loud. The power supply was just replaced, which did little/nothing. Reset all ram/etc.
View 3 Replies
View Related
Jan 20, 2008
My menu icons kept flashing on and off for a while. I left the computer by itself for a bit and returned to find the fans blowing at full blast and the cursor wouldn't move. So I pressed the power button to turn off the computer and restarted
My console log showed this repeated about every 30 seconds for about 30 mins
I think the icon flashing was a result of having a film dvd in an external drive like in this thread [URL]
I've ejected a film DVD that was in a Lacie external drive and verified my internal and external hard drives to check for any errors. All were ok.
I'm not too worried about the menu icons flashing but I am bother about the fans blowing like this. The fans have blown at full blast and crashed the computer about 12 times in the last 4 months when I have been away from the computer. So i'm a bit bothered about leaving the G5 alone. I haven't been able to replicate this fan issue - its random. Erasing the HD and installing Leopard doesn't seem to have stopped if from happening (I had the same problem in Tiger)
I have attached a screen capture of my Stat widget below
The slots and backside fans are always stuck at 76rpm and 51rpm. Also CPU A is normally at a high temperature than CPU B. I think the highest i've seen that temperature at has been about 75 but i don't look at it often. These stats were just when I was importing a CD into itunes fans were quietish.
I'm thinking about getting Apple to have a look at my G5 while the Applecare is still valid (it should run out in May).
Can anyone look at their Stats and see if their slot and backside speeds are stuck at similar rpms.
View 14 Replies
View Related
