I got a powerbook G4 for free and the power button is missing, just wondering is there any way to power it on without the power button? i just wanna see if it works to see if it is worth getting a new topcase
View 2 Replies
I'm trying to record something through the internal mic (and I'm too cheap to go out and buy a proper mic) and I was wondering if there is anyway through Terminal,or an external program, to force the fans to shut off for a certain period of time? I don't want to turn them off to find they can't turn back on and suddenly the computer is 1000�...I just want to keep them off to have a minimal amount of background noise. (And, yes, I'll be running it in a moderate climate so the computer doesn't overheat).
View 7 Replies View RelatedI've upgraded my HD two days ago. Today my PB suddenly turned off and won't turn back on. All the connectors are in the right places and nothing looks wrong inside. I have no idea what's happened.
View 3 Replies View RelatedIt just started getting really hot quickly for about a week before it didn't turn on. I would have it tilted so that its not flat, hoping that it would give it more air but it didn't do anything. I don't even need to do much to get it really hot. And I shut it off every night, so it should get to reset itself. I haven't done anything different that I haven't before. Any fixes please!? Also what's really weird is that it gets hotter and hotter even when it is off and not even plugged in.
View 4 Replies View RelatedI have a PowerBook G4 1.67 that shut itself down sometime during the day yesterday, and will not power back up. It's completely unresponsive to the power button, with no signs of life whatsoever.
I've tried resetting the PMU. There has been no new hardware or software installed. This has been tried with 2 batteries, and 2 AC power supplies.
There is inconsistency with the color of the AC power supply tip, as it doesn't seem to indicate the strength of the battery. Regardless of which battery or how much charge is left, the tip is Green, and will flicker Yellow very quickly once, when plugged in. It was Green following the initial shutdown, Yellow when I placed a dead battery in it, and then eventually turned Green. Now, it seems permanently in the Green / flicker Yellow state.
It did fully charge one battery while like this.
I'm having a MAJOR difficulty with my Powerbook G4 17" (1.67GHz) after replacing the Hard Disk...
I replaced the hard disk with a new 250GB one, and after putting everything back in place I put the OSX install CD in the harddrive and tried to turn the computer on...it wouldn't turn on so I left it for about 10 minutes. When I came back I tried again and it worked this time, and booted into the Open Firmware... then it suddenly turned off again. Then, about 2 minutes later again, it turned on again, and it went into the OSX installer. I partitioned the hard drive and was about to start the installation process, but before I could press the install button the computer turned off again. Now it has been like this for over 2 hours and refuses to turn on at all. I have tried resetting the PRAM but it makes no difference. I've tried taking out the battery and all sorts of things but nothing works. I'm at my wits end now
Does anyone know if there's anyway to turn on an aluminum powerbook without the power button? I mean is there any keystroke combination that can turn a powerbook on?
View 5 Replies View RelatedI recently purchased a Powerbook G4 1.5Gz 12" but it will not turn on unless it is plugged in. once turned on, i can unplug it and it runs on its battery just fine though?? it also can't seem to remember the date and my internet connection each time i turn it on.
View 2 Replies View RelatedGot a 4 year old 15" PowerBook with a small history of battery issues. Its on its 3rd battery that is on its last leg. It can't be unplugged for more than 5 seconds or it shuts off...been this way for months. Well today it shut off and won't turn back on. Do I buy yet another battery or is my pb dead?
View 8 Replies View RelatedI bought a powerbook off ebay, it worked but on startup occasionally a folder icon would appear. I rebooted from the original discs which seemed to do the trick. However the original discs are too old for many of my apps, so I bought some newer install discs (osx 10.5) I put the install disk in and got the panic message 'panic: Im hanging here'
The answer seems to be to run a disk repair (am i right?) However to do that I need to eject the install disc, I can't get the install disk out and of course it keeps tripping up everytime I start it. There is no secret little button to eject the disk manually. I have tried holding down apple and S but the install disk over rides everything and trips the mac up. I think ill be okay if I can just get this disk out.
I just aquired a PowerBook G4 (500Mhz) and it is dead. It will not turn on no matter what I try and when I plug in the power adaptor it glows a bright orange (almost red)...what does that mean?
For the past few months i have been using an external display hooked up to my 12" powerbook g4. I have had it on a dual display mode so no mirroring. Recently i would open the laptop lid waking it from being in sleep mode and my internal display will not turn on. The apply system profiler does not even recognize that the internal display exists. My external display works fine and has always been set as the main display. If i go to detect displays nothign happens. I have tried restarting the computer, instering system disks, unplugging the external and nothing has worked. I simply cannot get my internal screen to fire back up. When i used to unplug my external display the internal display would switch back to being the main display and everything would be fine. Now i cannot get the internal display to function whatsoever. Please try and help me as a need this laptop working and i will be ordering a mac pro soon for use with my external display.
View 1 Replies View RelatedI've tried turning it ff and on via the power button several times, but it always goes back to the white screen.
Info:
MacBook Pro (13-inch Mid 2010)
I have a problem with my 17'' MBP unibody:
1) Bluetooth is ON:
I can't turn it off. The checkbox is inactive.
But I can turn it off, if I choose "Share my internet connection for other units". (I don't know, if this is the right text in english, because my OSX is in german)
2) Now Bluetooth is OFF:
But I can't turn it on, because the checkbox "ON" is inactive.
It turns only on, if I choose "New Unit"(?). Then there is a new window, that says, that this is only possible if Bluetooth turns on. If I say OK, bluetooth turns ON.
Back to 1)
What's the problem. Why is this f* checkbox for turning bluetooth on and off inactive?
This is not a hardware problem, because I can have stable bluetooth connections.
I did a smc and am pram reset. But it doesn't help.
I am leaving for a week long trip and many parts of it will not be able to run the computer off of the powercord, which is a problem because I get about 40mins of wordprocessing use out of it when I run the battery alone. Can someone explain what the significance of these levels are for my Powerbook G4 15'' (Alm) 1.25GHz, namely the cycle count and full charge/remaining capacity?
View 8 Replies View RelatedHow can I transfer files to powerbook 540c
View 7 Replies View RelatedMy 12 inch powerbook does not start up. Instead it loads to Darwin. I have an install disk from a 15 inch powerbook G4 and I would like to know if using this would work on my 12 inch powerbook G4?
View 3 Replies View RelatedHad (used) iBook G4 several months now & thoroughly enjoy it, even tho' I live in the sticks where there's no hi-speed/wireless available; I connect to internet & power, which is fine.
This weekend I went to turn off my iBook & it wouldn't turn off. It's now permanently on, with opening info barely visible (like I need to click on F2 to brighten up, except nothing happens).
Currently using my "back up" computer, my iMac Grape, which is pretty much an antique by now.
I was playing around with my mac g4 logic board... ( yes, i know... ) anyways, i press the power, the light turns on, and the fan spinns up then everything just turns off... http://docs.info.apple.com/article.html?artnum=95035
^ my tower, (agp graphics, ftw)
I am kind of new to the MAC world... I once had the really old ibook with the handle a long time ago..and I never got a new Mac due to some problems I faced!
But now, I want to go back to MAC because many things were developed and I missed using a Mac! So, now I am confused between the Powerbook12 inch or the White Macbook 2Ghz ? I really love the size of the Macbook but I am worried about the intel processor...?
My Powerbook 10.7.2 op sys 2 months old will not play commercial pre-recorded DVD's.Ejects them without playing after a minute or so.Plays CD's
Info:MacBookPro, Mac OS X (10.7.2)
My Power book will not boot up. Upon powerup up I get the usual "bong" sound and then after several seconds I get a large icon in the shape of a gray folder blinking on and off with a white queston mark inserted in the folder. I have run the hardware test on the applications install disc and it checks out OK with the advsnced test. I have tried to reboot using the OSX Install DVD but it will not boot holding down "C" when starting up. When I try to reinstall OS X it stalls out because it cannot find a drive file to install in. Any ideas on what has crapped out, is it HD issue?
Info:MacBookPro, Mac OS X (10.6.3), Model A1278
Can MacBook software 10.5.7 be used to upgrade a PowerBook from 10.4.11.
View 1 Replies View Relatedfirst off is it even possible and/or worth it? I have an old powerbook 500 and it's kind of beat up and i was thinkink of selling it but why not try to upgrade it to a Intel mac (if i can) and if i can where can i get some parts?
View 5 Replies View RelatedI currently have a 17 inch powerbook with a 1.67GHZ G4 and 1.5gigs ram.
Would a new loaded macbook be noticeably faster? I want a small laptop.
currently i'm running a powerbook g4 1.67, and its starting to slow down on me. I have tons of pics and music and i have been faced with the predicament of either upgrading the RAM or just shelling out the extra money for a new computer. I run a lot of of my music programs on there as well (ie. Reason, ProTools) So what would you do? A few Mac people have told me to just upgrade the the ram and you'll see a huge difference and i'd be happy.
View 8 Replies View RelatedQuick question guys, I currently have a Powerbook G4 17 inch with 1.5 Ghz, 2GB of RAM and 80HD. I love it, with the full powered RAM it flies, but, I HATE ITS SIZE, i mean its not that portable. I have at home a Mac Pro so the power im looking for i have it on that machine. I wanna try and change my Powerbook before the new ones arrive because i need PORTABILITY. Is it really a big of a difference? I mean i dont need the "power" of the powerbook because i have the macpro at home. With 2 GB of RAM, will a macbook (lets say the current ones) be really faster and more efficient than my old PB G4? I like the 17 screen but i need portability so bad! what do you guys recommend?
View 2 Replies View RelatedI am looking to take advantage of my student discount before it runs out in the summer. I currently have a G4 Powerbook, 15", 1.67, 80GB, 512MB RAM.I used to use Final Cut, but now only use Photoshop, iMovie, Dreamweaver, Flash, so I do not think I have any need for a MBP.Will a new MB be significantly more powerful than my old PB for all the tasks I want?
View 16 Replies View RelatedI have 2 laptops and 2 questions!
One is a one year old MacBook Pro (2.66 intel duo) with 200GB HD, OSX Leopard and lots of data I need to transfer to my second laptop (a Powerbook G4 PowerPC 1.67 with OSX Tiger and a 100GB) I am planning on upgrading my MacBook Pro with a 500GB and moving the 200GB to my Powerbook so my question is: If I remove the 200GB from the MacBook and install it in the Powerbook, when I turn the Powerbook on, will Leopard boot up normally with all my data available? Or will the computer ask for the HD to be formatted and will I lose all my data?
Finally making the transition from PPC to C2Duo
Ordered by MBP 17" 2.8GHz over the weekend, should be here on Tuesday..
A couple of concerns:
1. Keeping in view its a transition from PPC to Intel, what would you guys advise as "the best way for transferring stuff from my PB to the new MBP"?
Time Machine Backup / Drag n Drop / ???
2. Over 90% of my applications are Universal Binaries meaning the installation should work fine on the MBP.. ?? Any case studies.. I am more worried about my CS4 Apps, installed brushes, filters, preferences etc.
3. Any other tips/best practices to help in this transition will be much appreciated..
