PowerPC :: Looking DVI-to-DVI Cable?
Nov 14, 2008
I have a late 2005 Power Mac G5 with one of those annoying GeForce cards where the DVI plugs are too close together to run 2 displays. (See this: [URL]
I cannot find this extension cable, which is unfortunate because I just picked up a second Cinema Display on eBay, and now I can't use it! (Unless I want to crack open the plastic on the DVI connector end...)
I called Apple, they no longer make or offer this cable, and are unable to locate one for me at this time. Does anyone happen to have theirs? If so, are you willing to part with it?
View 3 Replies
ADVERTISEMENT
Oct 12, 2010
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
View 1 Replies
View Related
Jan 8, 2007
does the older non-iSight iMac G5 have a built in PSU? (no external brick?)
what does the connector on the back of the iMac look like? (or the plug)
thinking about an older iMac G5 (vesa mountable) for a project Im working on
View 5 Replies
View Related
Sep 14, 2008
My Power Mac G5 is connected to my Sony HDTV using a brand new DVI-HDMI cable ($80 at Radio Shack). The second I plugged it in, both the TV and the Monitor went black. I only had picture for a couple minutes in 3 - 5 second intervals. It never straightened itself out. I restarted, same thing. Has this happened to anyone? It's as if the TV was drawing power away from my Apple Cinema display (non-HD...the older one). Heres my computer info:
Power Mac G5
2GB memory
Dual 250 GB hard drive
NVIDIA GeForce 6800 GT DDL
View 5 Replies
View Related
Dec 24, 2007
Was on my PB last night, went to pick the power cable up by the transformer and it emitted a spark, a little bang and then some smoke.
It was very very hot. It was late, and I was slow to react and it remained plugged into the computer after this had happened still charging it as if nothing had happened.
The computer is fine too.
Basically, I'd like to know if anyone has had a similar issue happen to them, and if I should get a new power cord? Or if you think it is okay to carry on using this one.
I haven't plugged it in since last night to see if it works or not, I am worried it will break the lap top.
View 4 Replies
View Related
Feb 15, 2008
I didn't know about this forum but since very long I was confronting with a problem.[URL]after readin' the comments of sum smart members, i directly was impressed and so signed up.
Well I have a PowerBook G4, fast n everythin' is great! it has a dvi connection. And I have a satellite receiver that I should update with a 9-pin vga cable and windows xp-laptop.
Now I installed windows xp on my PowerBook (using Virtual PC) but i need to know how i can connect them to each other.
So, my satellite receiver her has a 9-pin male vga connection and the PowerBook has a male dvi connection.
View 1 Replies
View Related
May 22, 2008
I have an old 14 inch ibook i use internet/mail my girlfriend recently damaged the power cable so cant get it to charge. Any suggestions as to where I might get a new one?
View 3 Replies
View Related
Feb 14, 2009
I have a Power Mac G4 MDD that I am trying to connect to the Internet using a USB Cable Modem from Broadstripe Cable in Maryland.
So far I have tried a straight connection using the supplied USB cable, then via an Ethernet adapter from the USB cable to the MDD. Went through the software setup several times and still have had no success. does anyone have a solution for this type of problem?
View 1 Replies
View Related
Nov 28, 2006
Two days ago my iBook G4 1Ghz started to have a big problem in turning it on: when I pushed the power button the fan started to whirl speedier than usual and nothing happened. The monitor stayed turned off and the startup "Boeing" did not sound. I tried to reset the PMU and the PRAM several times and the iBook finally turned on (I still don't know why!). I did a hardware test and no problems were detected.
Then, I connected my connection Ethernet cable and the computer crashed down. Now I am in the same situation that I've just described: I can't turn the computer on anymore and the fan starts wheeling. I also showed this problem to a local Apple center and they told me that the motherboard is dead. I am still not convinced, because one time I have been able to restart the iBook. Is the motherboard really broken?
View 4 Replies
View Related
Jun 16, 2007
i want to buy a cable on ebay that will connect out of my port on my powerbook g4, i think its a dvi outpout. and i want to plug it into a hdmi input on my projector.
there are different kinds, supposedly, of dvi cables.
DVI -D
DVI -M
[URL]
can anyone tell me what kind of cable i need to get to do this?
View 6 Replies
View Related
Jan 4, 2008
This is quite an interesting situation I'm in.
Today during High School, my first period, I noticed a Mac iBook G4 in the recycle pile used by my schools Tech department. I decided to swoop it up and give it a whirl, and see for myself what the problem with it was.
When I first powered it on, I was receiving a scrambled signal on my display. It was merely a white screen with lines in it, after a while of tinkering, even grabbing a few mac knowledgeable buddies of mine to see if they could do anything. It seemed like this would drag on, and I would not fix it.
In the end, we ended up tapping the screen and seeing a faint hope of light, that light was the appearance of the desktop! Unfortunately, the screen soon vanished back into it's scrambled state. Upon further tapping, we could only figure it was a problem with the connection of the display to the logic board.
View 23 Replies
View Related
May 29, 2008
I have a powerbook g4 15" 1.5Ghz. My VRAM is shot and my computer keeps on going into panic mode or gets hot and just stalls and I have too reboot manually. I just purchased another logic board off of ebay, yes I'm a very brave guy, I installed the new/used logic board and I now see that the ribbon cable recepticles for the keyboard and finger pad are not on the new logic board. Obviously I bought the wrong board. Is it possible to still use it somehow like buy a new top plate or buy an external keybord? The top plate I have now has the fat ribbon cable and also the small one. Can I just get the proper cables? If so which ones are they?
View 2 Replies
View Related
Jan 21, 2009
My old 1.33 12" iBook needs a new drive. I need some advice regarding the power switch cord. This says the power cord is soldered to the board: [URL] I can leave the top case connected by the power switch cord if required. Perhaps I could tape the case down during work on the back side and rotate the connected case left during work on the front side. This is slightly beyond my skill level. Great advice found here during searches. I plan to be very slow, methodical, and conscious of screws/step.
View 2 Replies
View Related
Feb 21, 2009
I am purchasing an iBook G3 in the next week as a notebook for school. I have a new iMac(intel) at home and I was wondering if I could use my iMac as a second monitor for my iBook and if so, how. I'm not sure what kind of cable to get or if it would work.
View 1 Replies
View Related
Apr 28, 2008
I just got a new MacBook Pro, but my wife uses my old 1.25GHz Alum. PowerBook. My MB pro flies, but unfortunately, the wireless ethernet on my old PB is slow as hell. I've got 11+GB of free space left on my hard drive and Safari or Firefox are the only applications I have open. I also have a cable internet connection with wireless through my 1st Gen Airport Express, yet it's still slow.
View 4 Replies
View Related
May 9, 2009
I am buying a used Powermac, G5 Dual 2GHz. It already has a SATA 320GB HD in it but I want to use my SATA 160GB from my dead iMac. The only questions I have are:
1. Is there anything special I need to do installing the second SATA drive? Does the drive need to be set to Slave or Cable Select?
2. Because the 160GB (going to use for storing musc) drive has OS X Tger installed, will it be a problem when booting once I install both drives? The 320GB drive has Leopard (This will be my primary drive). Will it boot to Leopard and let me use disk utility for format the 160GB drive?
View 2 Replies
View Related
Oct 29, 2005
so today was the day to replace the broken harddrive inside my 12" Al Powerbook and naturally I've ballsed it up.
The problem came at this stage of pbfixit's instructions. In pulling the power cable out of it's socket, I've pulled the bloody socket off the board.
So this is bad, that much is clear, and I need help, and lots of it. What's the best course of action now? It's not under warranty or anything, it was second hand to begin with.
For what it's worth, if anybody else finds this while searching for dismantling instructions, it's actually not too difficult. I would change this section of the instructions though, as I'm sure it'd be easier to lift up the top case slightly and then disconnect these two cables rather than fiddling through the tiny holes. I think going in that way give you a side angle and more opportunity to grip properly. And less opportunity to break your Powerbook. Anyhoo...
View 11 Replies
View Related
Sep 20, 2009
I have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
View 2 Replies
View Related
Aug 20, 2010
a Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
View 17 Replies
View Related
Nov 14, 2008
Just wondering if anyone knows is the original iBook G3 Clamshell A/V cable is interchangable with the iPod A/V cables?As in, can I use an iPod AV cable for my clamshell to output to my television?
View 5 Replies
View Related
Jan 9, 2009
I have a Mac Pro with an optical line in. I bought a cable and connected it to the Mac Pro, but the receiver(where I want to plug the line in) is old and only received optical. Is there some sort of adapter that would convert the connect that doesn't cost $200? I was able to connect an analog cable from the front of the mac pro's headphone jack into the back of the receiver, but the sound isn't really the greatest.
View 1 Replies
View Related
Feb 18, 2009
Quick question - I have a cable line running from my wall to my cable modem, which in turn connects via ethernet cable to an AEBS. The AEBS provides wireless connectivity to four Macs.
Can I split the cable line in my room so that I may watch TV, or would this cut my download/upload bandwidth in half?
View 9 Replies
View Related
Dec 14, 2009
Looking for best conversion cable to hook my Mac Book Pro up to our new HDTV - thought someone said I should get a converter that converts Mac 800 firewire output to an HDMI cable hookup.
View 6 Replies
View Related
Sep 11, 2010
I receive cable TV at home and I am told that instead of using a TV I can hook my MacBook via a HDMI cable and watch TV that way on my laptop screen. I'd like to do that. Is the information correct? How do I go about it? Can my MacBook do that?
View 1 Replies
View Related
Jun 9, 2012
I just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
Info:
iMac, Mac OS X (10.7.4)
View 3 Replies
View Related
Mar 25, 2010
Is there some kind of cable or connection that would allow me to have my cable tv play on my Mac? In my den/home office I basically have a tv and a Mac sitting side by side - seems kinda crazy since I can watch movies and such on my Mac, just thought maybe I could eliminate the tv altogether.
View 6 Replies
View Related
Jul 30, 2008
I just bought a new 24 inch LCD monitor. It has a VGA, a DVD-D and a HDMI Port. I have a G5 Mac with a DVI-I and an ADC port. The monitor came with a VGA cable. The sales person sold me a DVI to DVI cable (single link, 18+ 1 pin), but I get this message on the screen - "check signal cable." Is this the wrong cable? I just moved so am thinking it might be that something's loose in the tower. Perhaps there is there a better way to connect the two. When I got home I read in the manual "Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector." but that seems weird since neither of my ports are 2 rows. perhaps I should try DVI to HDMI? I do web design and video. Also, can you get these cables at Futureshop? I am now in a rather small town and don't have a Mac store.
View 4 Replies
View Related
Mar 13, 2009
When using PC, WINDOWS warned about not to disconnect USB/FW connected hardware until you ask the system to do so and the system confirmed it was safe to do so. However, I've been told that with Mac you can directly connect/disconnect the cables without any previous confirmation from the system. I'm confused, since I can not find how to get confirmation form the MAc that it is safe to disconnect the USB/FW.
View 6 Replies
View Related
May 1, 2009
About a week ago, I ordered an ATA to USB cable for my old internal HD that was in my MBP. I was hoping to turn my old internal into an external for something like Time Machine.When I got it, I tried to hook it up... and of course it doesn't fit (you can see on the attached pic). Quoted from the OWC site where I bought it: "Compatible with any 2.5" IDE device!" Well, my HD is a 2.5" ATA and what do you know, not compatible.
View 9 Replies
View Related
May 6, 2010
I just installed an ATI 4870 into my 2008 Mac Pro, I need a second power cable to connect the card to the logic board, does anyone know exactly what cable I have to order?
View 4 Replies
View Related
