Intel Mac :: Ethernet Cable Is Plugged But It Says "cable Unplugged"
Jun 9, 2012
I just brought a brand new IMac today but could not connect the internet with the cable though the cable does work with other computers. Do I have to change the settings or .....? Or its the problem of the jack?
I have a MacMini (about 3 years old, running OS 10.6.8).
Ever since I got it I have connected it to the internet via WIFI (using an Airport Express connected to a switch - connected to a router). No problems.
But now I have pulled a cable to my office and want it connected via ethernet.
But as soon as I plug in the ethernet cable I loose my internet connection. The DSL light on my router (Zyxel Prestige) flashes a bit and turns off.
So there is no internet connection.
But the network works (i can connect my XBox to the MacMini - which are both connected to the switch)I have tried removing everything (Switch, Xbox and Airport) so it's just the the router with my MacMini connected to it. Still looses internet. The routers DSL light goes out, and I have no internet connection.
I usually use an ethernet cable to connect to the internet. I recently bought a time capsule and in trying to set it up i plugged the capsule into the ethernet jack and my ethernet cable stopped working. I connected my computer into the capsule and its not the cable thats broken. I'm currently lost on what to try next, when i connect my computer to the jack, it says "nothing is plugged in" or something like that.
I was wondering how I could file share, or make the whole Hard Drive (HDD) accessible to another computer. The two other computers I have are a Toshiba Laptop with Ethernet and USB, and a iMac Intel with Firewire, USB, and Ethernet. Putting these to use along with:Three Ethernet Cables Now how do I get the whole HDD visible to the others computers (either/both) and be able to write to it? Also, I do not want to use CDs and have no CDs that came with the computers. I want to put Xubuntu on the eMac and Debian on the iMacs and erase the rest of the Hard Drives. The computers getting this are the iMac G3s and the eMac G4 in my Signature.
I got up and tripped over the power cable and It popped out (thanks magsafe! ) but the computer immediately shut down. I plugged it back in and started it up to see my clock was messed up. I changed the clock and redid the update. Everything seems to be working now but I was just wondering if anything else could have happened?
I have already tried using Qtips, other end of match sicks, cleaning the headphone jack with alcohol and a little jiggling with the other end of the plastic ballpen still ni audio from the Mac's speaker and the Built in output still active.
I have an aiport extreme card in my emac. It was installed around a year and a half ago and has workd fine until yesterday. it suddenly says that it is not configured. It also says the antenna cable is unplugged and that it is turned off. I tried to trouble shoot it with internet connection assistant which says cable is unplugged and aiport is off. I have taken the card out and reinstalled it and reattached the cable mutiple times to no avail. And yes, I know how hard it is to push in.
Info: eMac (ATI Graphics), Mac OS X (10.5.8), 1 GHz powerPC G4
I was just wondering if any other macrumorsmembers have been in the situation where there's no wifi, no decent 3G, but ethernet ports available to use, but you don't have a computer handy? Would it be possible that you could create an ethernet cable one end, dock the other, and literally connect e.g. an iPhone into the ethernet? At my place of work, there's no signal (dodgy GPRS/flakey Edge), some wifi, but in halls of residence, you get 1 ethernet port, and you can't put a wireless router onto it. It would seem that it would be an interesting solution, if it was possible.
I have hooked up a 2009 Mac Mini (2.16, 4 gb RAM, SL 10.6.3) to my sony receiver.When using an analogue cable, it works, but in stereo of course. I plugged in a tosslink optical cable, and nothing happened, so I thought maybe the cable is broken, so I bought a new one. So when I plugged it in, it worked....for about 2 hours. Since then, I had no luck whatsoever, no sound, nothing, nada.I tried using the cable with my macbook, worked like a charm. Several reboots and a pram reset later, same thing, no sound. I checked the settings, but there's nothing really to change there, it's set to digital out and that's it.I even tried a ridiculously long terminal command to reset core audio, to no avail.
2010 i7 15'' MBP. I've been connected to the internet wireless with my Airport Extreme from day 1, but today I wanted to give the ethernet port a try and it just didn't work. The ethernet cable is recognized, but it says there is no IP. I do not know my IP settings or any of that. What do I do?
I have a crossover cable and I need to connect my imac to my macbook so I can download some of my files on my macbook to my new imac. I know I have to go to Preferences > Networks > and change the ethernet settings but I'm not sure what to do.
I have tried searching for a similar question but have not been able to find an exact match. I have a new MacBook, a PS3, a Virgin Mobile USB and an Ethernet cable and I thought putting them all together so I could use the PS3 online would be easy! Could someone please give me a step by step process of what I am meant to be doing.
I have a G4 in my living room and my old PowerMac 7300 in my bedroom. If I want of use either one to go online I have to disconnect one to connect the other. I cannot connect both at he same time. I use broadband cable from Cable Vision in New York. I was told about a router. Can anyone give me advice on the name of good router and whether on not it will slow down the access speed on the internet?
a Cable that DEF transfers audio over to the tv? Also here is my macbook pro model. Does it do Audio? Build 10FS69. Someone said there is a belkin one, is that right? Also, I just bought one from Monoprice and that f'in cable doesn't work
I'm here at university and the wifi here sucks! it is so slow, it is working.However there is an ethernet port and I did connect to it this morning. But, this evening I tried connecting again and it wouldnt let me!At my university they require you to put in your student ID and pw in order for you to use the internet for both wi-fi and ethernet. But when i tried this evening it dint ask for my student ID or password. I went to settings and it did say that there was a connection and that "Ethernet has a self-assigned IP address and will not be able to connect to the Internet"
i dont understand how come now it isnt working. I aksed my classmate nextdoor if his internet port was working through the ethernet port he said it was.... i am not that tech savy so keep vocabulary to something simple lmaooo.
I've got an issue with my TC setup, I cannot for the life of me get it to see the cable modem and setup the WAN access. If you will pardon me I will cut n paste the lengthy description I left on the apple support list as I feel it is pretty thorough. I think I know my way around networks and dhcp but this setup doesn't yield any logs so I can't troubleshoot! I'm on Virgin Media 20megs and I can't connect using my brand new TC. Modem: Ambit 256 Time capsule : 1 tB, firmware 7.5 Test router : Netgear WGR614V9 MBP alubook 15 inch late 2008
I tried connecting with the test router and the MBP alubook to the modem and both can pickup the ethernet connection and get a DHCP lease after some coaxing (cold-start the modem first, then cold-start the router/mbp). But I'm having no luck with the airport extreme base station. Hard reset / factory reset / soft reset, any startup order, nothing works. I even left the devices offline for an hour before doing another round of testing. I tried several cables (including a crossover cable) and all configurations work apart from the ones involving the time capsule. Both the modem AND the TC ethernet ports light-up with a green light... but somehow the TC doesn't negociate its DHCP or even basic ethernet connectivity. I see there's a firmware 7.4.2 on the support site for the TC but I'd rather not downgrade the unit.
Here are the console logs from the MBP when it connects to the modem (yes, my MBP is named awesome, because frankly it is): Originally Posted by System.log when connecting MBP to Modem 29/12/2009 08:54:04 Awesome kernel Ethernet nvenet: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug 796d,0000,0de1,0005,45e1,0000 Originally Posted by Modem status page Cable Modem : Euro-DOCSIS 1.0/1.1/2.0 Compliant MAC Address : <<redacted to protect the innocents>> Serial Number : 0014A49B00A5 Boot Code Version : 1.1.2c Software Version : 2.111.1002 Hardware Version : 1.9
I have a MacBook Pro with OS X 10.5.6 I connect to the internet with an ethernet cable direct into the wall. When I open the network connection box, it says the ethernet is connected, but it will not load any web pages. Friday I was using it fine and then got off. Came back a bit later and could no longer connect to any pages. I have spoken to my internet provider and they say my settings are fine. I am online on my desktop that connects using the same ethernet cable. I am not having any trouble connecting on it. I went and bought a new ethernet cable, just in case it was the problem
plan to transfer from my Windows PC with the migration tool.I would like to know if it's possible to connect directly my PC to the Mac with an Ethernet cable. Is this considered as the same domestic network?
Info: iMac (21.5-inch Mid 2011), Mac OS X (10.7.3)