I software updated my iMac g5 (powerPC 1.6 OR 1.9GHz), with the mac OSX updated(170mb), and it never fully completed the download, said it had problems with the package. So I restarted it, and now its just stuck on the blue screen with the grey box (where it loads the IP extension, etc).
View 8 Replies
I have iMac 27 and screen problem on start up i have blue vertical lines, when it start i have a lot of blue dots and nothing else. when I connect outside monitor its showing the same.
Just installed lion and still the same problem when it starts blue dots, when startup in safe mode loads of blue lines and dots on the screen.
Info:
iMovie (iOS), Mac OS X (10.7.3)
When I press the power button on my eMac, it takes extra long on the gray screen with the Apple logo and the spinning gif, then takes about two minutes on the blue screen with just the spinning gif, then goes to a solid blue background, with a functional cursor, but no OSX. I've tried trying to eject the CD tray at all points in the startup process to put in the Mac OSX re-install discs, but it doesn't respond. What should I try before sending it in to an Apple store or Cupertino?
View 5 Replies View RelatedWhat solutions can be offered for iBook loading problem? It's stuck and I've some data I need to back up?
View 2 Replies View RelatedThere is a blue question mark on my mac and it keeps loading, normally I haven't had a problem like this when watching these events. I use latest version of Safari.
Info:
MacBook Pro (13-inch Mid 2010), Mac OS X (10.6.8)
I have a 12" PB and latelly became a nightmare with the stuck CDs. Usually it does not want to eject CDs/DVDs from companies but it handles fine virging cds/dvds. ?? Probably there is some formating in the industrial kind of CDs outside, who knows.just want to open this thread for people with the same problem.If the drive tries to eject but can't and end up mounting the CD again. Just take another CD and when you press eject again push that CD into the slot but just one third and you will see the stuck CD coming out with no problem as well.It seems there is a sensor or something that obviously does not work well. I inserted a virgin CD and the drive worked just fine and ejected later on, but a CD as the installer for my Linksys get stuck and some other softwares too.
View 9 Replies View RelatedI'm using Macbook Pro Unibody (late 2008). 2.4GHz, 2GB Ram. Mac OS X. So I'm in the library right now and tried to start my computer, and it is just stuck on the blue screen. It worked fine like an hour ago, I don't know what happened. So I hear the chime, and the white screen with apple logo. And then, blue screen and I see that little circle thing going around and around on and off, but nothing. I do hear the fan and hardware. I tried to do PRAM reset, but it doesn't work? I tried to look for other posts with similar symptoms, but couldn't find anything.
View 2 Replies View Relatedi was was using my computer when the screen went brown and striped. I **** down and restarted and the screen is now stuck on blue. I don't have the original software disc and my disc drive is broken. What can I do?
Info:
PowerBook g4, Mac OS X (10.5.6)
The computer is stuck on the apple screen with the spinning wheel. I can manage to boot up in safe mode but that is it. This arose from an apple security software download recently and when the machine went to reboot it could not. Now on a normal boot up it just sits on the grey screen with the spinning wheel for hours (if let). I have booted up in safe mode and removed anything from the Accounts that was other than the iTunes helper - rebooted - nothing
I have attempted an SMC and PRAM - again on reboot - nothing. I have also started in option mode but there are only two symbols that I can use one is a circular arrow, which does nothing when clicked and the other is a right pointing arrow that appears to attempt to launch OS X, to no avail. I have also tried the option of rebooting with the install disk in the drive and holding down the C key - again nothing.
My 2006(ish) Intel core 2duo 2.16 mhz 20" imac wont start up, it only stays at the loading screen, how can i fix this?
Info:
iPhone 3GS, iOS 5
Computer is stuck on the loading screen.
Info:
iMac (20-inch Early 2008)
i have the 13 in unibody macbook pro. 10.6 snow leopardd
all of a suddden my computer froze and i turned it off with the button. when i tried to restart it would load but would stay stuck in the blue screen. i tried out the disk snow leopard disk and when i press "c" a multi languege pop up tells me i have to "hold power button untill shut down and resart in" blah blah blah
i did a hardware test and it said everything was fine..
i dont care about this on my hard drive i just wanna get it running again
I have a Macbook Pro, have had it for about a couple of years now. Monday of this week, the computer was acting a little sluggish, so I decided to shut down the computer, let it cool down for a couple of hours, then turn it back on later. Well, once I decided to do that, I noticed after the grey screen & Apple logo screen appeared, the screen showed about 2 different versions of blue & stayed on the blue screen. After 3-5 minutes I knew something was wrong, so I just tried restarting, nothing worked. So I google up similar problems, none have a conclusive ending. I didn't recently install any new hardware, all I did recently was sync new photos from a trip to NYC. I've tried a PRAM Reset, SMC Reset. Boot from Snow Leopard CD, ran Disk Utility, repair disk permissions and repaired the disk, tried a reinstall of Snow Leopard, Install failed.
I checked the log, it says:
file://localhost/System/Installation/Packages/MediaFiles.pkg
Failed to load (or something along the lines of that).
So, I went and got the Leopard disk that came with the computer and tried an archive and install, 15 mins later Install failed once again, yet it used about 4 GB in the process, so I went from 82 GB to 78 GB of space available. So I put in the SL disk once again and tried to see if I still had the files on my HD still there by goign all of the way to the section where it asks you to accept the license agreement and if you want to save it. I clicked save to search my files, and they're still there, but I can't access them. I'm currently stuck at Purdue in the middle of Indiana and the nearest Apple Store is over an hour away. I really need to get my files off of that MBPro. If I can't even login, how can I go about doing so if I have a iMac with over 800GB of space & an ethernet cable?
I have had problems with 2 different Macbooks this last 2 weeks. 1 Macbook 2,4Ghz latest release and 1 Macbook pro that I cant remember specs on (the aluminum one without any black around display) etc. They say that they did some updates and restarted computer. When the mac starts up it comes all the way to login screen but when I click the user to login with there is only a blue screen with mouse arrow displayed.
I have tried a couple of things:
Hold shift on boot
Hold apple+p+r on boot
Boot on install disk and repaired diskpermissions
Other (brand new) RAM in both slots
Diskwarrior
Put disk in another macbook (exact same version)
Nothing of the above helped so I installed a new disk in the macbook install fresh OS and used the guide to clone everything from the original disk in a firewire case. When I did this it worked for a while but after a couple of restarts it was back at the bluescreen again. So to fix this I finally did a new OS install and copied files by hand. desktop, documents, movies and that kind of stuff. Not any library files, preferences and stuff. So now it works but since I got another with the same problem today. Anyone heard of bad firmware or updates released last couple of weeks or have any other ideas? No external devices attached.
Was listening to a CD and closed the iBook G4 with the CD in it. 10mins later remembered I had left it in. When I opened the iBook for around 2hrs there was a loud fan sound coming from the bottom of the computer. The iBook wouldnt turn on or do anything for around 8hrs and now all I get is a blue screen with the CD still stuck in it.
View 1 Replies View RelatedMy Mac OS x is stuck on the blue login screen. I have tried unplugging, cmd-alt-p-r which still takes me to the login screen, held down until I heard the chime three times as suggested but went to login screen. Tried going in to safe mode by holding down shift key at start up still took me to login screen. Tried to fix with boot disc and nothing comes up. By the way I wasn't really doing anything. Was checking my emails but hadn't even clicked on one when the screen totally froze. When I powered down it came back to email page. I had to force a shutdown several times and no can't get past login screen.
View 3 Replies View RelatedI emptied my cache on Safari and my computer stayed frozen for a few minutes. I decided to re-boot, but every time I do so, it goes from the gray Apple screen to a blue screen and stops right there. I don't get the spinning wheel, but rather the black arrow that I can move about the blue screen, but nothing else.
Here's what I've tried with no success.
1. Re-booting via Safe Mode (Command-Shift). Instead of freezing on the blue screen, it asks for my password and after a few seconds it stops on the Snow Leopard Pink/Black Stars background. Same result, only the background is different
2. Resetting PRAM - No luck
3. Re-booting with the Snow Leopard DVD and using Disk Utility. I follow the necessary steps online. No luck
Ok, last night there was an update for OSx Lion. I installed the 3 items, it said I needed to restart, which I did. When it restarted there was another box, which was checking the updates or something. After that finished, it logged into my home screen, and I shut it off. Today, I tried turning it on and it was stuck. After 10 minutes, I held the power button to shut it off and try again. I did this twice, and on the third time a loading bar showed up at the bottom of the screen, went for a while and almost reached halfway, then it dissappeared. I waited, but nothing happened. What's wrong and how to I fix it? I think its 10.7.3, but it might be 10.7.2 I'm not sure what the difference is.
Info:
MacBook Pro, Mac OS X (10.7.3)
My iMac has a blue screen and will not do anything at all!
Info:
iMac, Mac OS X (10.6.1)
Original MacBook Pro is stuck on blue screen. Restarted, then went to gray background with the apple logo....now on to a plain blus screen......isn't moving off of that.
Info:
MacBook Pro, Mac OS X (10.6.8), Original MacBook Pro w/ core duo
I booted up my Mac Mini last monday to find for some reason it is stuck in that loading screen which displays a grey background, the apple logo and a round loading swirly sign. I have tried running disc utility and trying to repair it but it dosent detect any errors, I also tried clearing the PRAM according to Resetting your Mac's PRAM and NVRAM and still no joy. I've done a total reinstall of OSX and went through an hour and a half of erasing and reinstalling osx from its supplied discs, however still it wont get past the loading screen.
I've used a usb hard drive aswell and tried installing osx onto that to see if it was a hard drive error but it still gets stuck at the same loading screen. I can access safe mode without a problem. I have done numerous hours of searching the web without any luck to a cure to my specific problem. Specs are Mac Mini 1.66GHZ intel duo core 2, 1gb ram, 10.6 OSX (upgraded from 10.5) 100gb hard drive I have also started up in Verbose mode and got alot of info that I don't really understand, I've attached screen shots of where the loading screen gets stuck in verbose upon 4 attempts at booting up the mini.
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
i tried to install snow leopard on my computer, but then found out it was only a one user disk and had already been used, so i started it back up on the hardrive and now it wont go past the white loading screen with the apple logo and then just shuts down. ive tried restarting in safe mode but thats about all i know how to do.
Info:
MacBook, Mac OS X (10.5.8)
I've restarted my computer to factory settings, but for wahtever reason, it has been stuck on the blue screen (similar to what you see when you turn on a mac) and refuses to go beyond that. Does anybody know why this mite be happening??? did i do something to mess it up??? (earlier i restarted it when it first hit the blue screen because i thought it froze or something). Is there something i can do to fix this problem?
View 3 Replies View RelatedEverything was fine until this morning when i came into work, started up my Macbook as usual from sleep mode. was able to use OS X for a little while, had to leave to go onsite so i locked my screen (i use sizzle keys and made Command + L to lock my screen to the log on prompt). as soon as the cube spins to the logon screen, BOOM, all i see is the solid light blue screen just sit there. i walk away and 5 minutes later, it's still on there, can't recover or go back to my desktop, so i force shut down (hit the power button, and attempt to reboot the OS X. then thats when it all gets bad. Everytime i boot into OS X it just sits there with the blue screen and flickers back and forth with the gray gear wheel spinning and so forth.
Ok, so next check, i go to boot into my Boot Camp partition into Vista. no problems, was able to boot in my boot camp partition without any problems (im typing this in boot camp at this moment.)
So far i've been able to boot into my Boot Camp and the OS X Restore Disc without any problems.
I booted into the OS X boot disc, and ran Disk Utility, ran the perrmissions check and the disk check and both fixed problems aparently on my OS X partition. went to boot back into OS X, blue screen.
So now i do the PRAM and NVRAM reset doing Command+Option+P+R and again booted into OS X. blue screen.
Booted into Safe Mode (Safe Boot) took awhile, but again. stuck at blue screen and if i press any keys or move the mouse, the grey gear spins for like 10 seconds and just goes back to the blue screen. and the process goes over and over again.
(later on this afternoon) I even ran FSCK to check the volume for problems. "it appears to be OK"
The good thing atleast in this situation is that i can access my OS X partition in Vista (via MacDrive) without any problems, so if having to reload my previous Time Machine backup (which stupid me forgot to back up my system over 60 days ago ) or having to just Archive my OS X and reinstall it, that will have to be my final choice. But i don't REALLY want to have to do this all over again if at all possiable.
OS: Snow Leopard Bootcamp Win 7, Ubuntu 9.10.Problem: I felt I would be nice to the iMac and shut it down after a hard days work. I woke up the next morning, turned it on, and it loads up past the gray screen, then goes to the dark blue snow leopard screen. From there I DO NOT get a mouse pointer. I get zip, zilch, nothing.I have let it sit over night just to make sure it wouldn't surprise me. Remedies tried:Booting to safe mode. Boots fine but when it gets to the blue screen it doesn't do anything else.Booting to single user mode. From there I renamed the com.apple.loginwindow and the com.apple.startup file. Didn't do anything.Resetting PRAM, VRAM, ram, jingle bell, any key, * key, I've tried resetting everything possible and not possible. WHY computer gods? WHY?
View 6 Replies View RelatedUsing my Mac earlier today I lost all sound output, and attempted to reboot it to try and fix the problem. Now instead of booting it's stuck on the white loading screen. I've tried turning it off and on again from here, but I still get the same result.
Info:
MacBook
My Macbook Pro is stuck at the loading screen with the apple logo and a spinning wheel!
I Have tried CMD and R. I have also tried the Option button...
Info:
MacBook Pro with Retina display
I tried fsck -f fsck -y multiple times, booting in safe mode, zaping the pram and all that stuff, nothing as worked. I don't really care about how to fix it but I care more about, Is there any possible way I can get files off of the macbook even though it wont boot. Like is there a way for another computer (windows or mac) to pick it up so I can transfer files? What accessories will I need?
View 1 Replies View RelatedI have a 2.0 GHz early 2005 Power Mac G5 (7,3) that won't get past the light blue screen at start-up. I've tried everything - reset the PRAM, Apple Hardware Check (on overnight loops, everything came back OK), fsck (all OK), repaired my HD and permissions on it, and then erased the drive using Target Disk Mode and another Mac, and attempted to reinstall OSX from the install disk that came with it (with OSX Tiger). I've tried switching out the RAM with no luck.
The only thing I haven't tried is a new video card (the installed one is an ATI Radeon 9600). Here's what it does: powers on with the usual chime, then moves on to the white Apple screen, the wheel spins, then it moves on to a darker blue screen, then it finally moves on to a lighter blue screen with an arrow, and it just stays there. It will boot into safe mode (pressing shift), but I can't even upgrade to Leopard in safe mode, much less figure out what's wrong.
